-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLearning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
The Designer of the Future
Our expert contributors peer into their crystal balls and offer their thoughts on the designers and design engineers of tomorrow, and what their jobs will look like.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
UTC Aerospace Systems’ Lead PCB Designer Presents at Designer Day
April 7, 2015 | Kelly Dack, I-Connect007Estimated reading time: 12 minutes

I sat down with Stephen V. Chavez, lead electrical designer for UTC Aerospace Systems, at IPC APEX EXPO Designer Day, to discuss his presentation at the event. Chavez, who provides leadership to a global team of PCB designers, spoke on the importance of workplace communication with international teams.
Kelly Dack: Stephen, let’s start by telling me a little about you and your company, and then about your part in Designer Day events.
Stephen Chavez: Thanks, Kelly. First, I am the lead PCB designer for UTC Aerospace Systems at our Electronics System Center [ESC] division in Phoenix, Arizona. We are an engineering center of excellence, and we service other service business units (SBUs) within the company, as well as our international teams. I lead teams in Phoenix, Arizona, and Bangalore, India.
I presented at Designer Day on the topic of successful leadership and communication of an international team and gave an overview of the day-to-day activities, how to be successful, what doesn't work, and what to be aware of.
Dack: About how many teams in India, and between the U.S. and India, are involved?
Chavez: At the division in India, which we call the Global Engineering Center India [GECI] there are about 800 employees. Of those employees, there is one large PCB team comprised of 18 PCB designers that I integrate with, as well as help lead, mentor and facilitate PCB design training. Any IPC knowledge that I gather and am able to share, I then pass on to all the team members, which may include not only PCB designers but electrical engineers and mechanical engineers as well.
Dack: Are these dedicated designers and are they UTC Aerospace Systems employees?
Chavez: Yes. All 18 PCB designers at that division are dedicated UTC Aerospace Systems designers and every one of them are all direct employees of UTC Aerospace Systems. When the opportunity arises and there is a surge or overload in required project support, we will bring in external company resources. When we do this, we use companies outside of UTC Aerospace Systems as contractors and on an as-needed basis.
Dack: Tell us how the teams work, and how the work is digested and acted upon. In other words, when the product requirements for a new board design come in, regardless of where the design originates, does it come to your location, and where are you based?
Chavez: Because not all SBUs within UTC Aerospace Systems have electrical design capability, or may not have enough engineering expertise/resources within their own SBUs to fulfill their external customer requirements/needs for a specific project, my division—ESC—is a division within our company that those SBUs can partner with to meet their customers’ expectations and requirements. A combined proposal is created between those SBUs and ESC and submitted to the external customer.
Once a proposal has been approved and that SBU has been awarded that specific contract, work begins. I (ESC) will take action per the required SOW which includes the project’s specific requirements, deliverables, and schedule. If the work is ITAR related, that work will remain in the states and be completed by ESC and/or a U.S. based division of UTC Aerospace Systems. If the work is not ITAR related, work will be allocated to the GECI as necessary, to meet the project’s needs.
Typically, I meet with the respective ECAD technical lead at GECI to initiate a project kick-off meeting. He and I discuss the project details, to include milestones and overall project schedule as it relates to ECAD. As a team, we then allocate the required resource(s) as necessary to complete the required tasks. The project goes through our typical design cycle, which includes many back and forth hand-offs, handshakes and phase gate checks per our internal processes.
Since ESC is located in Phoenix, it is more than 12 hours behind GECI’s time zone. This can prove to be a challenge at times, but actually we here at ESC see this as a huge advantage because this gives us literally the ability to truly work on a design around the clock, 24 hours a day. Combine this advantage with certain toolsets capabilities, and you’re talking seriously shortened turnaround or design cycle time.
Dack: You had mentioned challenges. With so many people and such distances and time differences, tell us about the challenges and how you overcome them.
Chavez: The initial challenge was the time difference between Arizona and Bangalore. How are we going to communicate? How is the data going to flow? These were serious questions that had to be addressed up front. In reality, the twelve-and-a-half hour time zone difference was a blessing in disguise. It quickly had a positive effect because it allows ESC and GECI to essentially work around the clock as a team on any given design and at any given time. The way we attack a project as a team works very effectively and is very simple. We accommodate our India team’s work schedule so that they're actually in the office when working on the project each day during their portion of the hand-off stages of the design process. When we hold meetings, WebExs or conference calls, or even video conferences, we do it during our evening time and from our homes here in Arizona, because the infrastructure in the U.S. can better handle it (phone, internet, etc.). This way, our team members in India are actually in the office where there's more dedicated, sustainable energy regarding the power blackouts that often occur there, which are a non-issue in the office. The phone infrastructure is better; conference rooms are readily available for teleconferencing or videoconferencing with the entire team.
Dack: Tell us about your team. You have a team organized onshore at your facility in Phoenix. You've already mentioned up to 800 resources at GECI, but tell us about the average engineer in Bangalore and the average designer. Give us a description. How does it work?Page 1 of 2
Suggested Items
Collins Aerospace Approved to Begin Full Rate Production of MAPS Gen II system
03/13/2025 | Collins AerospaceCollins Aerospace, an RTX business, has received approval for Full Rate Production of the Mounted Assured Positioning, Navigation and Timing (PNT) Generation II system (MAPS GEN II).
Applied Aerospace Acquires NeXolve
03/12/2025 | PRNewswireApplied Aerospace, a proven manufacturer of solutions for commercial and military spacecraft, aircraft, and ground-based systems, announced it has completed the acquisition of NeXolve.
RTX's Collins Aerospace Unveils New Engineering Development and Test Center in Bengaluru
03/10/2025 | RTXCollins Aerospace, an RTX business, opened its new Engineering Development and Test Center (EDTC) at the company’s North Gate campus in Bengaluru, India. The new facility streamlines product development, testing, and certification of components locally, bringing aerospace technologies to market faster.
Jaltek Joins Midlands Aerospace Alliance
03/06/2025 | JaltekJaltek are delighted to officially announce that they have joined the Midlands Aerospace Alliance (MAA). The MAA which was formed in 2003 to support and represent the aerospace industry across the Midlands region, now represents one of the largest aerospace clusters in the world and is one of the strongest advocates for both the aerospace industry and the Midlands region.
Real Time with... IPC APEX EXPO 2025: Navigating Aerospace Training Trends With Blackfox
02/26/2025 | Real Time with...IPC APEX EXPOSharon Montana-Beard, Blackfox Training’s vice president of international and strategic sales, updates Nolan Johnson on the latest training demands and offerings from Blackfox.