-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueAll About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
Designing Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
A Review of the Opportunities and Processes for Printed Electronics (Part 1)
June 22, 2015 | Happy Holden, PCB Technologist-RetiredEstimated reading time: 7 minutes
Altogether, there are presently nine key manufacturing image transfer technologies that are either being employed or are proposed for PE production.
Traditional printing technologies:
- Screen printing
- Rotogravure printing
- Flexographic printing
- Offset printing
- Inkjet printing
- Imprinting and stamping
- Plasma printing
- Direct laser imaging or ablation
- Curtain and roller coating
Of these enabling technologies, stenciling and screen printing have been around the longest and both methods are still widely used in production today. Membrane switch technology, a clear member of the printed electronics family, relies heavily on screen printing to make products. Stencil printing and transfer printing are among the first printing technologies devised by man. One need only look to ancient human hand prints found on rock walls left by our ancestors who either placed their pigment covered hands on cave walls or sprayed pigments from their mouths at the backs of their hands held flush against the rocks to provide an outline of their five digit stencil. Those basic processes are still in use today, albeit with better equipment. For example, in the electronics manufacturing industry stencil printing remains the method of choice for printing solder ink onto printed circuits for SMT assembly.
Web printing of circuits has been in use for several decades. In the printed circuit industry, the benefits of printing circuits on a flexible base were seen very early and brought into practice by a number of companies including Sheldahl Corporation in Northfield, MN (now part of Multek, a division of Flextronics), which entered the flex circuit business as an extension of its involvement in the development of materials for the military in the early 1960s. Sheldahl engineers developed roll-to-roll processing using a step-and-repeat screen printing process for etch resist and an etching process to remove the background metals.
Over the years, web printing has been supplemented with different photolithographic methods, including direct write and, more recently, direct printing of catalytic toners and inks along with conductive and resistive inks and the printing of semiconducting materials. Rolltronics Corporation, a Silicon Valley technology company, was an early industry leader, pioneering what is now called printed electronics during the late 1990s and early 2000s. Rolltronics developed flexible electronic device printing technology and roll-to-roll production processes for low-cost, durable, thin-film switch arrays for display backplanes, sensors and other large area circuits. They were targeting the technology for products such as standard and custom backplane displays based on ultra-thin flexible structures with integral LCD-like switchable materials that they were printing into the product. Unfortunately, the company’s vision did not come to fruition as a result of market timing and/or positioning.
Figure 1: Overview of how printing techniques compare for resolution versus throughput. Curtain/roller coating is similar to other roll-to-roll techniques and soft lithography is a photo-imageable technique that is off the scale to the left.
In Part 2 of this article series, Happy Holden digs deep into the different technologies that are being used for PE production.
Editor's Note: This paper has been published in the proceedings of SMTA International.
Page 2 of 2Suggested Items
KYZEN to Highlight Understencil and PCB Cleaners at SMTA Querétaro Expo and Tech Forum
07/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Querétaro Expo & Tech Forum, scheduled to take place Thursday, July 24, at Centro de Congresos y Teatro Metropolitano de Querétaro.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
06/26/2025 | Team NCAB -- Column: Fresh PCB ConceptsMicro components have redefined what is possible in PCB design. With package sizes like 01005 and 0201 becoming more common in high-density layouts, designers are now expected to pack more performance into smaller spaces than ever before. While these advancements support miniaturization and functionality, they introduce new assembly challenges, particularly with traditional solder mask and legend application processes.