-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueDesigning Through the Noise
Our experts discuss the constantly evolving world of RF design, including the many tradeoffs, material considerations, and design tips and techniques that designers and design engineers need to know to succeed in this high-frequency realm.
Learning to Speak ‘Fab’
Our expert contributors clear up many of the miscommunication problems between PCB designers and their fab and assembly stakeholders. As you will see, a little extra planning early in the design cycle can go a long way toward maintaining open lines of communication with the fab and assembly folks.
Training New Designers
Where will we find the next generation of PCB designers and design engineers? Once we locate them, how will we train and educate them? What will PCB designers of the future need to master to deal with tomorrow’s technology?
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - design007 Magazine
Multilayer Technology Passes AS9100 Surveillance Audit
June 23, 2015 | Multilayer TechnologyEstimated reading time: 1 minute

Multilayer Technology (MLT), located in Irving, Texas has passed its AS9100C surveillance audits. The audit consisted of 2.5 days (20 hours) of intense auditing by our registrar. All departments were completely audited to ensure compliance to the AS9100C Certification. This audit marks the five-year anniversary that Multilayer Technology has maintained this highly prestigious certification.
Viny Mulani president of Multilayer offered the following, “The organization has continued to benefit in all 3 critical audit areas- Sales, Purchasing and Production.” The surveillance process is more than just an audit; it is an honest third-party evaluation of how our corporation functions on a daily basis and highlights areas for improvement that our internal audits may not disclose.”
Multilayer Technology utilizes internal IPC certified auditors to conduct all ongoing audits. The internal audit process always yields valuable insight into potential modification to our current processes and/or procedures however it is highly beneficial to have the 3rd party audit and allow us to make corrections to proactively avoid any potential impact on the customer product quality, performance and/or delivery.
The results of this audit turned out to be quite exceptional with the operations and purchasing departments receiving a rating of 3 and sales department with a rating of 4, the highest possible. This was no doubt due to the company's commitment to this process as well as the diligence of the quality department to maintain this certification.
Suggested Items
Sparrow Quantum Secures €21.5 Million to Accelerate Photonic Quantum Innovation in Europe
04/10/2025 | BUSINESS WIRESparrow Quantum, a leading European supplier of photonic quantum chips, has secured €21.5 million in Series A funding to accelerate the development and commercialization of its world-leading quantum chip technology.
LITEON Technology Reports Consolidated March Sales of NT$13.4 Billion Up 22% M-o-M, 24% Y-o-Y
04/10/2025 | LITEON TechnologyLITEON Technology reported its March consolidated revenue of NT$13.4 billion. Thanks to the growth from power management in cloud computing, advanced server, and networking, the revenue is up 22% M-o-M and 24% Y-o-Y.
Real Time with... IPC APEX EXPO 2025: SPEA—Optimizing Testing Processes in PCBA
04/10/2025 | Real Time with...IPC APEX EXPOMike Sexton and Dustin Warren of SPEA explore market dynamics for PCBA manufacturers. They emphasize the need for optimizing testing processes, introducing deep In-Circuit Test (ICT) technology that identifies weak components often overlooked by traditional tests. The discussion also covers flying probe technology, highlighting its flexibility for high-mix, low-volume production and comparing it with ICT testing methods.
Incap US Invests in Advanced SMT Technology
04/09/2025 | IncapIncap Electronics US invested approximately USD 2 million (EUR 1.82 million) in advanced SMT (surface-mount technology) production equipment to expand its production capacity.
Real Time with... IPC APEX EXPO 2025: Takaya Focusing On Customer Engagement
04/08/2025 | Real Time with...IPC APEX EXPODavid Levine discusses the two new Takaya flying probe tester models on the show floor this year. The advanced features include an innovative liquid lens technology for improved focus in industrial applications, and zero impact probes for RF boards. Real map technology enhances testing accuracy, while eighth generation system improvements even offer remote viewing. The integration of potential for AI with test data is also discussed.