Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
Elementary, Mr. Watson: Rules of Thumb—Guidelines vs. Principles for PCB Design
Beyond Design: High-speed Rules of Thumb
The Past, Present, and Future of IPC-A-610
July 8, 2015 | IPCEstimated reading time: 1 minute
Since 1983, IPC-A-610, Acceptability of Electronic Assemblies, has been the standard used by organizations interested in understanding the acceptability criteria for electronic assemblies around the world.
To understand the ultimate power of IPC-A-610, you need to first understand what is at the core of this standard. IPC-A-610 is a collection of visual quality acceptability requirements for electronic assemblies. It is utilized as a post-assembly acceptance standard to ensure that electronic assemblies meet acceptance requirements.
IPC-A-610 is an essential document in an electronic assembler’s library. Not only is it necessary to have the proper material and tools, but it is also important to have clearly defined acceptance criteria. IPC-A-610 provides that criteria developed and accepted by representatives from some of our industry’s leaders.
Most often, IPC-A-610 is used as a companion document to other standards. While there is much overlap in criteria for these compatible standards, each has a unique purpose. The development and evolution of IPC-A-610 falls largely on a unified task group, which consists of volunteers who often work together on other standards as well. It is because of this that so many standards are able to operate as companion pieces. For example, IPC J-STD-001 is a material and process requirements standard that is critical for use during manufacturing. The volunteers developing these two standards often have synergy meetings where they address changes to both documents at the same time.
Specifically for the ongoing development and maintenance of IPC-A-610, it is an industry consensus document prepared by subject matter experts from the electronics industry. The committee consists of more than 200 volunteers representing their companies, organizations, and interests of the industry. It is a truly collaborative project.
On top of that, IPC-A-610 is a global document, readily able to assist electronic assemblies around the world. For example, previous revisions of IPC-A-610 were translated into as many as 20 languages. This expands the reach of the standard, solidifying its usability in the global market. It is all about sharing knowledge and inspiring growth to create a competitive market within the electronics industry.
To read this article, which appeared in the June 2015 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
IPC Japan Puts More Focus on Collaboration, Standards Development, Advanced Packaging
11/26/2024 | Yusaku Kono, IPC Japan RepresentativeIn the past year, IPC has strengthened its relationships with key Japanese companies and government bodies. This was accomplished, in part, by a visit to Japan this past summer, where members of the IPC Asia team, punctuated by standards committee work last winter, forged stronger ties with government officials and companies involved in electronics manufacturing.
IPC Hall of Fame Spotlight Series: Highlighting Patty Goldman
11/22/2024 | Dan Feinberg, I-Connect007In my first article of this special series, I wrote a synopsis of the IPC Raymond E. Pritchard Hall of Fame (HOF) Award, along with a commentary on its first few members, particularly Pritchard. Over the years, IPC members who have contributed significantly to IPC and our industry have been awarded this high honor and recognition. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. Over the coming months, I look forward to researching and reporting on IPC Hall of Fame members and their contributions. This month, I highlight Patty Goldman.
Winners of IPC Hand Soldering World Championship at electronica 2024 Announced
11/21/2024 | IPCIPC hosted its Hand Soldering World Championship in Munich, Germany, at electronica on 14-15 November 2024, welcoming 14 competitors from 13 companies and 12 countries worldwide. Skilled contestants competed to build an electronics assembly in accordance with IPC-A-610 Class 3 criteria, and were judged on the functionality of the assembly, compliance with the assembly process and overall product quality. The contestants were allowed a maximum of 60 minutes to complete the assembly.
IPC Issues Clarion Call for EU to Reclaim Leadership in Electronics Manufacturing
11/21/2024 | IPCIPC released a synopsis of its recent white paper, Securing the European Union’s Electronics Ecosystem. This condensed document presents a comprehensive overview of the current challenges in Europe’s electronics manufacturing industry and shares actionable steps to help the EU achieve a stronger, more autonomous ecosystem.
Enjoy the Journey: PCB Design Instructor Kris Moyer on His Sustainable Lifestyle
11/19/2024 | Michelle Te, IPC CommunityWhen I contacted IPC design instructor Kris Moyer to discuss his sustainable lifestyle, he responded to my text with a call. "I'm calling you from about 8,000 feet, sitting at the foot of Mammoth Lakes," he told me. “My friends and I are about to get in the pool for the afternoon." Kris can do this because he actually lives full-time in his travel-trailer at this campground. He's now a permanent camper, taking him anywhere the winds blow—and where there's strong internet service—so he can teach his PCB design classes, offer expert interviews, and live off the land.