The Knowledge Base: The Impact of Harsh Environments on Residue Tolerance
Standard of Excellence: Hiring for Quality Positions in Manufacturing, Engineering, and Management
Global Citizenship: What I’ve Learned About the American PCB Business
ESCATEC Cuts 20% Costs in Making Medical Patch Pump
July 27, 2015 | ESCATECEstimated reading time: 2 minutes
ESCATEC, one of Europe's leading providers of contract and manufacturing services, has shaved 20% off the manufacturing costs of a patch pump by automating the production and test processes.
The initial contract was for a small prototype run of the PCB numbering a few thousand units. This was done using ESCATEC's SMT line is Switzerland. However the customer then asked for additional components to be added such as sensors that had to be done by hand taking several minutes per unit and therefore adding to the production cost.
"As future runs will be in the hundreds of thousands, we redesigned the manufacturing process to automate as much as possible," explained Dr. Martin Muendlein, Technology Specialist at ESCATEC. "As a result, we were able to shave 20% off the total manufacturing and test costs of each unit. This ensured that we are competitively priced."
Examples of cost reduction include having the sensors now supplied on a reel so that they can be installed on the SMT line and having the opto sensors pre-assembled into a can by the supplier that are also sent on a reel as a sub assembly for the SMT line.
Cost reduction measures were also applied to the testing. The initial units were tested one at a time using a dedicated stand-alone test unit. For the larger production run, ESCATEC has designed a new unit that can test twelve devices at the same time.
"Because this is a medical device, any changes in the design, manufacture and test have to be rigorously evaluated and recorded," explained Dr. Thomas Dekorsy, General Manager at ESCATEC. "As one of the few contract design and manufacturing companies to have both ISO13485 and FDA registration, we have rigorous and robust procedures in place which stem from our Swiss focus on quality and precision."
About ESCATEC
The ESCATEC Group provides fully-integrated electronic and mechatronic design and manufacturing solutions to assist customers in achieving success in their market. Its one-stop solutions and best-in-class service enable companies around the world to operate more profitably, sustainably and efficiently. Founded in 1984, its history is full of innovation, which made it a first choice partner for many European and North American OEMs. The Swiss-owned company perfectly blends Swiss business philosophy and attention to quality, precision and detail with the advantage of low-cost, mass-volume manufacturing capabilities in its Asian factories.
Further information about ESCATEC, a leading provider of contract design and manufacturing services: www.escatec.com enquiries@escatec.com
Share on:
Suggested Items
The ICAPE Group Invests in Jiva Materials to Drive Eco-Friendly PCB Innovation in Europe
11/27/2024 | BUSINESS WIREICAPE Group, a global technology distributor of printed circuit boards (“PCB”) and custom-made electromechanical parts, today announced it will be acquiring a minority shareholding in Jiva Materials Ltd, a UK-based innovator and the developer of Soluboard® - the world’s first fully biodegradable PCB substrate.
Biden-Harris Administration: CHIPS Incentives Award with Intel to Advance U.S. Leading-Edge Chip Capacity
11/27/2024 | U.S. Department of CommerceThe Biden-Harris Administration announced that the U.S. Department of Commerce awarded Intel Corporation up to $7.865 billion in direct funding under the CHIPS Incentives Program’s Funding Opportunity for Commercial Fabrication Facilities. The award follows the previously signed preliminary memorandum of terms, announced on March 20, 2024, and the completion of the Department’s due diligence.
Absolute EMS Enters Strategic Partnership with PTEC Solutions to Enhance End-to-End Electronics Manufacturing Capabilities
11/27/2024 | PTEC SolutionsAbsolute EMS, Inc., a six-time award-winning provider of fast turnaround, turnkey contract electronic manufacturing services (EMS), is excited to announce a new partnership with PTEC Solutions, a highly respected provider specializing in design, cable and mechanical assembly services.
Creation Technologies, Rite-Hite Celebrate 35 Years of Manufacturing Excellence
11/27/2024 | Creation TechnologiesCreation Technologies, an end-to-end, scalable Specialty Global Electronic Manufacturing Services provider, and Rite-Hite, a premier manufacturer of loading dock equipment and industrial safety solutions, announce the celebration of their 35-year strategic manufacturing partnership.
Betamek Berhad Secures MYR 396,420 Government Grant for Digital Transformation
11/27/2024 | BetamekBetamek Berhad has accepted a government grant of MYR 396,420 from the Ministry of Entrepreneur and Cooperatives Development, managed by Malaysia Industrial Development Finance Berhad.