Global Citizenship: The Future of U.S.-China Collaborations
The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
PEMTRON Launches New Eagle 8800 3D AOI with Color Imaging
August 5, 2015 | Pemtron TechnologyEstimated reading time: 1 minute
Pemtron Technology announces the launch of the Eagle 8800 3D AOI system with revolutionary new color imaging. Color imaging enhances accuracy and precision of Automated Optical Inspection (AOI) providing a more true-to-life inspection image for the operator and reducing the rate of false calls. Because color imaging brings a life-like dimension to AOI inspection, there’s no need for the operator to use a microscope, and Pemtron’s color imaging system gives the software the ability to identify features on the surface of the PCB, from solder paste prints to lifted leads. Inspection is faster, more selective, and more accurate.
The Eagle 8800 features fast program setup, 100% true 3D AOI, an extremely low false call rate, plus complete SPC capability, and creates a closed loop solution when paired with Pemtron’s TROI Series Solder Paste Inspection (3D SPI) system which also offers color imaging.
About PEMTRON Technology
PEMTRON Technology specializes in the design and manufacturing of 3D AOI and SPI measurement and inspection solutions for the global circuit board assembly and semiconductor markets. Sales and support centers are located globally, and PEMTRON has established sales and service offices on Mexico, as well as the U.S. East and West coasts with headquarters in Los Angeles, California. For more information, visit www.PEMTRON.com, or contact Pemtron Technology (East), 470 Olde Worthington Road, Suite 200, Columbus, OH 43082; Tel. Direct: 800-850-8764800-850-8764, Fax: 800-850-8764. Main office location: 3450 Wilshire Blvd., Suite 108-73, Los Angeles, CA 90010.
Share on:
Suggested Items
IPC Announces UK Regional Qualification for Hand Soldering Competition
01/02/2025 | IPCIPC invites skilled soldering experts to participate in the UK Regional Qualification for the IPC Hand Soldering Competition (HSC) on February 4-6, 2025, at the Farnborough International Exhibition Centre.
Connect the Dots: Designing for Reality—Solder Mask and Legend
01/02/2025 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we discussed the strip, etch, and strip process. At this point, we have a functioning board, but we still need to protect the PCB from environmental effects and document the circuit components. This brings us to the solder mask and legend phase of production.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.