Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
Elementary, Mr. Watson: Rules of Thumb—Guidelines vs. Principles for PCB Design
Beyond Design: High-speed Rules of Thumb
Automotive Systems Design: a Support Engineer’s Perspective
September 28, 2015 | Monica Andrei, Continental Automotive SystemsEstimated reading time: 2 minutes
Assume you need to design a multipart complex product requiring several PCBs to be fitted into a tight housing. Assume also that you have to bring product iterations to market as fast as possible, be it at regular intervals or on demand. Finally, assume that you will have to do this not only faster, but also at an increasingly lower cost. This is a trend that becomes the norm for products in many industries, not least in automotive electronics.
Specifically, automotive electronics require connecting an increasingly higher number of signals, fitting a multitude of PCBs into a single housing, checking a large number of electric and mechanical parameters and being able to simulate their interaction in the system functionality context.
With product complexity growing, space availability at a premium and a market that becomes more demanding in terms of quality and reliability, you would surely appreciate a suite of tools that gives you the ability to take care of all these interrelated demands. Not surprisingly, automotive electronics system designers are definitely among those who badly need the means, tools and support to cope with all these developments and many more.
In this new fast-changing environment, at a minimum, you would like to be able to design, test and simulate, so that:
- All functions perform to expectation
- All signals are connected throughout the system
- The signal integrity is guaranteed over the entire frequency range
- The supply power and grounding comply with all specific component requirements
- The electromagnetic interference is kept under control
- All boards, when assembled, fit into the case, so that
- The entire system ends up fit for purpose
This method has been dubbed a system design approach. Although this entails more steps than traditional approaches, it allows for streamlining the design, as well as for testing and verifying each operation separately and in concert. Overall, it gives designers the ability to be and to stay in control when designing complex systems with a multitude of requirements that appear contradictory.
Moreover, the system design approach allows for
- Checking functionality on system level, which improves reliability
- Simulating product test cases, which augments quality, and
- Optimizing redundancy, which reduces system costs
In a nutshell, the promise of the system design approach is to allow for hitting the “sweet spot” in terms of functionality, quality and reliability, in the shortest possible design time and with the lowest possible resource investments. In an industry that has a very long time to market (on average around 1,000 days), steadily increasing quality demands and an ever intensifying pressure to lower costs, all these promises become most attractive and compelling.
Getting Started
You obviously must begin working with the new tools taking the first step first, which means identifying which suite of tools offered by the market best fits the company needs. Once the needs have been defined, determine where to purchase these tools. If you are a newcomer to this situation, research the market for the most appropriate suite of tools and make a decision based on the cost-benefit analysis results. Among others, factor in the cost of testing the offers versus the risk of not making the best choice. For this aspect of the decision-making process, it is important to rely on the information the supplier provides, which, as matter of experience, can be deficient or incomplete. It is obvious that this first step becomes a challenge by any measure.
To read this entire article, which appeared in the September 2015 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
Fresh PCB Concepts: PCB Design Essentials for Electric Vehicle Charging
11/27/2024 | Team NCAB -- Column: Fresh PCB ConceptsElectric vehicles (EVs), powered by electricity rather than fossil fuels, are transforming transportation and reducing environmental impacts. But what good is an EV if it can't be easily charged? In this month's column, Ramon Roche dives into the role of printed circuit boards (PCBs) in electric vehicle charging (EVC)—and the design considerations.
From Construction Work to PCB Design in Under a Year
11/27/2024 | Andy Shaughnessy, Design007 MagazineAt the Anaheim Electronics & Manufacturing Show in October, I had the opportunity to talk with some new PCB designers, including Jon Smith of Frontgrade Aethercomm. During the Anaheim show, John Watson, a PCB design instructor at Palomar College, led a panel of his past and present students, including Jon, who shared his story of switching from a construction career to PCB design in a matter of months, courtesy of Watson’s Palomar College design curriculum.
PCB Layout Rules of Thumb for Consideration
11/25/2024 | Patrick Davis, Cadence Design SystemsJust because a “rule of thumb” is usually based on experience instead of precise facts doesn’t negate its value. For instance, when I told my kids that a good rule of thumb was not to back-talk to their mother, they discovered very quickly how accurate my advice was once they crossed that line. There are a lot of rules of thumb that we rely on daily, including those that apply to PCB design.
HPC Customer Engages Sondrel for High End Chip Design
11/25/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips, has announced that it has started front end, RTL design and verification work on a high-performance computing (HPC) chip project for a major new customer.
Rules of Thumb for PCB Layout
11/21/2024 | Andy Shaughnessy, I-Connect007The dictionary defines a “rule of thumb” as “a broadly accurate guide or principle, based on experience or practice rather than theory.” Rules of thumb are often the foundation of a PCB designer’s thought process when tackling a layout. Ultimately, a product spec or design guideline will provide the detailed design guidance, but rules of thumb can help to provide the general guidance that will help to streamline the layout process and avoid design or manufacturing issues.