Nolan’s Notes: Finding Your Sweet Spot
Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
ALPHA MAXREL Alloy Improves Reliability in LED Chip-On-Board Assemblies
November 24, 2015 | AlphaEstimated reading time: 2 minutes
Alpha, the world leader in the production of electronic soldering and bonding materials, has developed advanced alloys for improved thermal stability and reliability for high temperature operation and higher thermal fatigue and vibration resistance, the first of which is known as the ALPHA MAXREL alloy.
Available in solder paste, preform and wire format, the ALPHA MAXREL alloy has proven very effective for LED Chip-on-Board (COB) Assembly applications, where high CTE mismatch can exist between the die stack and substrate, and creep fatigue properties of the solder material are important..
“It has been shown that the ALPHA MAXREL alloy maintains excellent shear strength even after 1000 thermal cycles under high CTE mismatch conditions,” said Ravi Bhatkal, Vice President, Energy Technologies at Alpha. “In the case of high power LED assemblies, such as for outdoor lighting or automotive applications, the CTE mismatch is quite high, causing significant strain energy build-up during thermal cycling, in the solder joint between the LED die and the Metal Core PCB. This can cause micro-cracking and eventually failure of the joint. It is therefore important to use alloys that will create strong solder joints with improved thermal fatigue/creep and vibration resistance to ensure long-term reliability.”
A variety of die attach materials, including solder, conductive adhesives, or sintered materials can be used to bond LEDs to the substrate, depending on requirements. In addition, Alpha offers ALPHA Lumet P39 Solder Paste with MAXREL Alloy to enhance reliability for high-power LED COB assemblies.
Alpha’s innovative LED products help optimize the LED industry’s technology drivers of cost per lumen, efficiency, brightness and reliability over lifetime. For more information on ALPHA® LED materials, visit our website.
About Alpha
Alpha, a business unit of Alent plc, is the global leader in the development, manufacturing and sales of innovative specialty materials used in a wide range of industry segments, including electronics assembly, power electronics, die attach, LED lighting, photovoltaics, semiconductor packaging, automotive and others.
With a unique global presence in over 30 locations throughout the Americas, Europe and Asia Pacific regions, Alpha supplies a full line of ALPHA electronics assembly material products, including Solder Paste, Exactalloy Solder Preforms, Cored Solder Wire Solder, Wave Soldering Fluxes, Bar Solder Alloys, and Stencils. It offers die attach product technologies to the power electronics segment in its Argomax, Atrox, Maxrel, and Fortibond brands. For the LED segment, Alpha offers its Lumet products covering applications from die attach to systems assembly in the LED manufacturing process.
Alpha also offers product technologies for the Photovoltaic segment, including its unique pre-fluxed ALPHA PV Ready Ribbon, high performance standard ribbon, bus bar, solder wire and flux. Alpha’s Advanced Materials unit is the leader in electronic polymers and solder materials for semiconductor packaging applications. Since its founding in 1872, Alpha has been committed to developing and manufacturing the highest quality specialty materials. For more information, visit www.alpha.alent.com.
Share on:
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
06/26/2025 | Team NCAB -- Column: Fresh PCB ConceptsMicro components have redefined what is possible in PCB design. With package sizes like 01005 and 0201 becoming more common in high-density layouts, designers are now expected to pack more performance into smaller spaces than ever before. While these advancements support miniaturization and functionality, they introduce new assembly challenges, particularly with traditional solder mask and legend application processes.
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.