Atomically Flat Tunnel Transistor Overcomes Fundamental Power Challenge of Electronics
December 8, 2015 | University of California - Santa BarbaraEstimated reading time: 4 minutes
One of the greatest challenges in the evolution of electronics has been to reduce power consumption during transistor switching operation. In a study recently reported in Nature, engineers at University of California, Santa Barbara, in collaboration with Rice University, have demonstrated a new transistor that switches at only 0.1 volts and reduces power dissipation by over 90% compared to state-of-the-art silicon transistors (MOSFETs).
MOSFETs have been the building blocks of everyday electronic products since the 1970s. However, to sustain the ever-growing need for increased transistor densities, miniaturization of MOSFETs has given rise to a power dissipation challenge due to the fundamental limitations of their turn-on characteristics.
"The steepness of a transistor's turn-on is characterized by a parameter known as the subthreshold swing, which cannot be lowered below a certain level in MOSFETs," explained Kaustav Banerjee, Professor of Electrical and Computer Engineering at UC Santa Barbara. A minimum gate voltage change of 60 millivolts at room temperature is required to change the current by a factor of ten in MOSFETs. In essence, the existing state of transistor technology limits the energy efficiency potential of digital circuits in general.
The research group of Professor Kaustav Banerjee at UC Santa Barbara took a new approach to subverting this fundamental limitation. They employed the quantum mechanical phenomenon of band-to-band tunneling to design a tunnel field effect transistor (TFET) with sub-60mV per decade of subthreshold swing.
"We restructured the transistor's source to channel junction to filter out high energy electrons that can diffuse over the source/channel barrier even in the off state, thereby making the off state current negligibly small," explained Banerjee. At UCSB, Banerjee's Nanoelectronics Research Lab includes Deblina Sarkar, Xuejun Xie, Wei Liu, Wei Cao, Jiahao Kang, and Stephan Kraemer, as well as Yongji Gong and Pulickel Ajayan of Rice University.
Banerjee and his colleagues are motivated by a global electronics industry that loses billions of dollars each year to the impact of power dissipation on chip cost and reliability. "This translates into lower battery lifetime in personal devices like cell phones and laptops, and massive power consumption of servers in large data centers," adds Banerjee, pointing out the global scale of this energy demand.
Page 1 of 2
Suggested Items
Mustaches and Automation in Flexible PCB Fabrication
06/24/2024 | Chris Clark, Flexible Circuit TechnologiesIn any manufactured product, whether a house or a flexible circuit, there is always a raw material component in the overall cost. In the flexible circuit, flexible heater, and rigid-flex industry, sheet materials can account for 20–60% of the overall price. Admittedly, this is a very broad range, but factors, such as how common the materials are in the region where they are made, can cause this to swing one way or the other. Your actions as an engineer or sourcing agent have an impact on overall cost, which I’ll illustrate through the example of building a house.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/21/2024 | Marcy LaRont, PCB007 MagazineHe’s back, and in splendid form. Pete’s Starkey’s coverage of the EIPC Summer Conference, which took place June 4-5 at the European Space Centre, The Netherlands, is top notch. Joan Tourné from NextGIn Technologies emphasized that our attention must be focused on the interconnection ability of our PCBs and highlights VeCS as an alternative to the traditional plated-through-hole approach. Finally, Martyn Cauwe of IMEC discusses environmental impact and specifically, the need for a better, parametric approach to quantifying it, something European businesses are being required to do on the regular.
The Critical Role of Materials
06/19/2024 | Marcy LaRont, PCB007 MagazineMaterials and substrates are an ongoing discussion for PCB fabricators today, offering PCB designers and fabricators much more choice than was available two decades ago. When it comes to running a printed circuit board company, material management is a critical piece for operations.
Standard of Excellence: Looking Five Years Into the Future
06/19/2024 | Anaya Vardya -- Column: Standard of ExcellenceThe future of the PCB industry will be based on technology. As components get smaller, denser, and more complicated, PCB fabrication companies must keep up with their customers’ needs both today and in the future. It is no longer enough to just keep up with our customers’ current needs. We must be prepared to meet their PCB needs three to five years out. We need a complete understanding of where our customers are going and what they will need in the near distant future.
Indium Corporation Expert to Present at High-Temperature Electronics Network Conference
06/18/2024 | Indium CorporationIndium Corporation Technical Manager for Europe, Africa, and the Middle East Karthik Vijay will deliver a technical presentation at the International Conference and Exhibition on High-Temperature Electronics Network (HiTEN 2024), taking place July 15-17 in Edinburgh, Scotland, United Kingdom.