Facing the Future: The Role of 5G and Beyond in Shaping PCB Demand
It’s Only Common Sense: Stop Pitching, Start Listening
Trouble in Your Tank: Causes of Plating Voids, Pre-electroless Copper
Matrix's NEW Hakuto Dry Film Laminator Impresses at IPC
April 14, 2016 | MatrixEstimated reading time: 1 minute
Matrix is delighted with customer reaction at last month’s North American IPC unveiling of the new Hakuto Mach 630NP/6630NP Series Dry Film Laminators and is now ready to provide Sales and Service to all regions of North America.
During the recent APEX/IPC Show in Las Vegas, customers were amazed at the new and Innovative technology such as changing rolls in a matter of seconds.
Matrix believes the NEW Hakuto Mach 630NP Dry Film Laminator will change the game for PCB manufacturing.
Fred Long, Matrix Business Development says: “The new Mach 630NP machine addresses the accuracy needed to assist in the transfer of very fine lines on the latest HSLL laminates using Super Low Profile Copper surfaces. This is made possible by the new Lamination Module with its EVEN Heat and EVEN Pressure across the entire surface of the laminated panel. In addition, the ability to change the rubber lamination rolls in seconds will not only increase productivity but will also offer alternative “quick change” rubber solutions for different product needs. The complete redesign of the film lamination approach will now begin to reach the most important users of this latest technology. Matrix is eager to show manufacturers that by using the new system, Productivity and Yield will now surpass all traditional ROI expectations.”
See the PCB007 IPC Interview with Dan Feinberg and Fred Long discussing the new laminating machine and its innovative features, click here.
During the next few weeks, Matrix is scheduled to place additional machines in three specific regional areas in the US. Customers will then be able to travel to these sites and see the machines in operation.
About Matrix USA Inc.
Committed to the motto, “Quality Products, Dependable People”, Matrix was established in 1977 with the objective of providing quality raw materials to the North American Printed Circuit Board Industry. Matrix has four rapid-response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information, click here.
Share on:
Suggested Items
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Trouble in Your Tank: Causes of Plating Voids, Pre-electroless Copper
05/09/2025 | Michael Carano -- Column: Trouble in Your TankIn the business of printed circuit fabrication, yield-reducing and costly defects can easily catch even the most seasoned engineers and production personnel off guard. In this month’s column, I’ll investigate copper plating voids with their genesis in the pre-plating process steps.
Elephantech: For a Greener Tomorrow
04/16/2025 | Marcy LaRont, PCB007 MagazineNobuhiko Okamoto is the global sales and marketing manager for Elephantech Inc., a Japanese startup with a vision to make electronics more sustainable. The company is developing a metal inkjet technology that can print directly on the substrate and then give it a copper thickness by plating. In this interview, he discusses this novel technology's environmental advantages, as well as its potential benefits for the PCB manufacturing and semiconductor packaging segments.
Trouble in Your Tank: Organic Addition Agents in Electrolytic Copper Plating
04/15/2025 | Michael Carano -- Column: Trouble in Your TankThere are numerous factors at play in the science of electroplating or, as most often called, electrolytic plating. One critical element is the use of organic addition agents and their role in copper plating. The function and use of these chemical compounds will be explored in more detail.
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.