The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Essemtec to Demo Spider Jet Dispenser at IMAPS 2016
September 12, 2016 | EssemtecEstimated reading time: 1 minute
Essemtec today announced plans to exhibit in Booth #224 at IMAPS Pasadena, scheduled to take place Oct. 10-13, 2016 at the Pasadena Convention Center. Essemtec will demonstrate the new compact Spider jet dispenser. The Spider can utilize two dispensing valves rated at up to 150,000 dots per hour. It dispenses 3D patterns and is easily adapted to your application.
The Spider occupies only 1 m² of floor space and features linear motor drives for high accuracy: 40 µm (3σ) at full speed. Job changeover is quick with intuitive CAD import and job preparation. Mapping of heights by laser technology enables 3D applications. A mineral-cast chassis provides stability at varying temperatures. Job and quality management is integrated. An optional ISO 7 cleanroom version is available.
The Spider is capable of a variety of semiconductor packaging applications including underfill for flip chip, dam and fill chip encapsulation, glob top and cavity fill, die bonding, lid seal, thermo-compression bonding, thermal grease, 2.5/3D packaging, and copper pillar packaging.
For more information about Essemtec, click here.
About Essemtec AG
Essemtec AG is a privately held Swiss equipment manufacturer, specializing in high speed fluid dispensing as well as flexible high-mix SMT placement solutions. Both divisions leverage the company’s vast equipment and process know-how gained since 1991 to let their customers achieve significant competitive advantages. The company’s goal is to improve its customers’ workflows, setup times, defect rates, traceability and overall manufacturing efficiency through superior software and by providing managed SMT storage.
Share on:
Suggested Items
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Sayonara to the Last Standing Copper Foil Plant in North America
12/17/2024 | Marcy LaRont, I-Connect007In July 2021, PCB007 Magazine published an interview with Michael Coll and Chris Stevens of Nippon Denkai about the new acquisition by Nippon Denkai of the last-standing ED foil manufacturer in North America. The plant in Augusta, Georgia, was formerly owned by Oak Mitsui, Inc. and had been purchased by Nippon Denkai the previous March, after which significant investment was made with the expectation of providing more jobs.
SCHMID Group Unveils Enhanced InfinityLine H+ for Electroless Copper Deposition
12/16/2024 | SCHMID GroupThe SCHMID Group, a global leader in high-tech solutions for the electronics industry, proudly announces significant updates to its flagship InfinityLine H+ Electroless Cu system. Specifically designed for the production of high- performance advanced packaging applications using mSAP and SAP processes, the system reflects SCHMID’s expertise in horizontal electroless copper deposition.
OKI Develops PCB Technology with Stepped Copper Coin Insertion to Achieve 55 Times Better Heat Dissipation in Outer Space
12/12/2024 | BUSINESS WIREThe OKI Group printed circuit board (PCB) business company OKI Circuit Technology has successfully developed multilayer PCB technology with stepped copper coin insertion to achieve 55 times better heat dissipation compared to conventional PCB. The stepped copper coin is offered in two types, circular and rectangular, to suit the shape of the electronic component mounted on the PCB. OTC is working to develop mass-production technologies with the aim of introducing PCBs incorporating this new technology into markets for compact devices or devices used in outer space or other environments where air cooling technology cannot be used.
Fresh PCB Concepts: PCB Plating Process Overview
12/12/2024 | Team NCAB -- Column: Fresh PCB ConceptsIn this installment of Fresh PCB Concepts, Mike Marshall takes the helm stating: PCBs have been the platform for the interconnection of electronic components for decades. Because of process costs and other constraints, such as mechanical properties or size limitations of the alternatives, PCBs will remain the standard low-cost interconnection technology. Rapidly increasing performance and functionality requirements of wireless and high-speed devices have challenged the development and implementation of new manufacturing solutions.