-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSolder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
Certifications
Certifications have historically been seen as a cost of doing business, but how do we turn them into a positive ROI and a value to both customer and vendor?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
4 Ways Your EMS Partner Can Respond to Supply Chain Disruption
July 27, 2017 | Neil Sharp, JJS ManufacturingEstimated reading time: 4 minutes
![](https://iconnect007.com/application/files/2416/3121/8551/NeilSharp-JJS.jpg)
When disruptions to the electronic component supply chain occur, they are painful. Lead-times can extend overnight, prices can treble, and in some cases, parts are placed on allocation or discontinued altogether.
This can leave both original equipment manufacturers (OEMs) and electronics manufacturing service (EMS) providers with limited options when it comes to securing material for production requirements.
Unfortunately, right now, the component market is once again in the middle of being disrupted. After several years of slow growth and minimal investment, coupled with a number of significant M&A’s and an increased demand for memory products, the supply chain is once again struggling to keep up.
In the past few months, more companies have announced extended lead times and products on allocation. The memory sector appears to have been hit the hardest, with all Toshiba products on allocation with a lead time of over three months, and Micron facing similar problems. News outlets and industry sources are also predicting a delay to Apple’s iPhone 8 release due to supply chain constraints.
These concerns amplify the need for EMS firms to have practices in place for dealing with supply chain disruption. In this article, we discuss four ways your EMS partner can mitigate risks to your supply chain.
1. Maintain close relationships with suppliers
A good EMS partner will have long-standing relationships in place with a global network of reputable suppliers. Their suppliers should have an in-depth understanding of the market and be equipped to deal with changes in demand. Regular business reviews should take place between the EMS provider and their key suppliers so that quality, delivery, and pricing issues can be monitored and discussed. In addition, market intelligence and production demand should be shared freely between both parties to ensure there are appropriate supply chain solutions in place.
2. Firm up ‘call off’ demand into firm purchase orders
During times of disruption, your EMS partner may consider advancing their letters of intent to firm orders as a way of securing stock ahead of others. Turning a ‘call off’ annual order into a firm drop provides an extra level of commitment and can help the EMS firm negotiate stock from their suppliers. However, this can be a risk for the EMS provider, particularly if you are not prepared to mirror the same level of commitment. In a worst-case scenario, the EMS provider could be left liable for covering the costs of the unused stock so you may find they will expect a similar level of order coverage from you first before they go ahead and do this themselves. This tends to be more of an issue for customers that are running annual Service Level Agreements (SLAs) with their EMS partners as opposed to placing firm monthly purchase orders.
3. Artificially increase order coverage
Increasing order coverage over and above what is actually needed can be another way of helping to safeguard stock when the supply chain is struggling. In this scenario, the EMS firm has the chance of being seen as the ‘bigger’ customer (based on the supplier's existing order book) and then prioritized as a result. Money talks and the more spend an EMS firm has, or is willing to place during times of turmoil, the higher up the queue they can go. Of course, this does pose a number of risks. If demand is already too high and an allocation situation is in place, these additional orders will only heighten the problem and could lead to further challenges and price rises. It could also backfire on the EMS provider and their customer as the supplier might end up delivering everything they were asked for, impacting the EMS company’s cash flow. Be careful what you wish for.
4. Look at all the alternative parts available
A good EMS provider should review your bill of material (BOM) and build data to ascertain if other components can be used as a replacement. Quite often, multiple semiconductor manufacturers can be used in a design, providing they are the same fit, form and function. The EMS firm won’t want to keep swapping between manufacturers and suppliers but as a short-term solution, buying in alternative devices, approved by you of course, can be a quick win and is often overlooked. And if you haven’t listed any suitable alternatives in your design, your EMS partner should have strong product knowledge and access to suitable alternatives through their network of suppliers which they can then discuss with you.
When faced with any form of disruption, communication is fundamental to a successful partnership. There should be a clear, open and frequent line of communication about any risks and what your EMS partner is doing to eliminate them. But it works both ways too. It’s important for you to keep them abreast of anything that could have an additional impact on the supply chain. For example, by bringing to light any possible increases in demand you have planned for the future or a new product design you plan to bring to market soon.
There are many things that can disrupt an electronic component supply chain, from natural disasters, to price hikes of oil and copper, general economic conditions, and political unrest. Even annual events, like Chinese New Year and Christmas can impact production schedules. The best EMS partners are committed and keep their fingers on the pulse, communicating actions and proactively suggesting solutions to help you mitigate any additional costs or lead-times associated with supply chain issues.
This article originally appeared on the JJS Manufacturing blog, which can be found here.
Suggested Items
Atotech to Participate at KPCA Show 2024
09/03/2024 | AtotechMKS’ Atotech will participate in this year’s KPCA Show 2024 in Incheon, held at Songdo Convensia from September 4-6, 2024.
Victory Announces Breakthrough in PCB Technology with New Product Launch
08/29/2024 | openPRShenzhen Victory Electronics Technology Co., Ltd., a leader in the printed circuit board (PCB) manufacturing industry, is proud to announce the successful development of a groundbreaking new product.
Connect the Dots: Designing for Reality—Electroless Copper
08/28/2024 | Matt Stevenson -- Column: Connect the DotsRoll up your sleeves because it's time to get messy. In a recent episode of I-Connect007’s On the Line with… podcast, we discussed electroless copper deposition. This process deposits a copper layer into the through-holes and vias of what will eventually be a PCB. Electroless copper deposition feels like a black box to many people. It sort of looks like a black box, too. The boards go in one side, come out the other, and emerge differently. So, let's crack open that black box and look inside.
Maximizing ROI Through Better Wet Process Control
08/20/2024 | I-Connect007 Editorial Team“When things get out of control, the variation in your wet process begins,” says Mike Carano,. “Just because they look like good boards and may even pass electrical test, it does not necessarily mean you have good boards. Once the chemistry is headed toward the right or left side of the process control parameter cliff, the plating is compromised. If the copper is thinner than it should be, when the customer puts it into service, the board may fail after 500 cycles vs. the requisite 1,000 or 2,000 cycles. The root cause issue is that you plated 7/10ths of a mil of copper instead of one-mil of copper because you were not controlling your process. The fact that you passed your own electric test becomes inconsequential.”
The Chemical Connection: Controlling an Alkaline Etch Bath With Low Copper Loading
08/07/2024 | Don Ball -- Column: The Chemical ConnectionThis month, I wanted to continue my discussion on how much process control is actually needed for high-density circuit production. However, in the last month, I have been called on to help with a specific process control problem: how to control an alkaline etch bath when you’re not etching much copper. This problem has been cropping up more frequently as smaller shops (and a few larger ones) concentrate on low-volume, high-value plated through-hole panels such as prototypes, resistor cores, etc.