-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSignal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
Showing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
South African Electronics Industry Going Strong
April 3, 2018 | Barry Matties, I-Connect007Estimated reading time: 3 minutes
EDA Technologies is a South African company that offers PCB design engineering services, mainly for the domestic electronics market, which makes up a surprising 12.5% of South Africa’s GDP. I recently spoke to founder Nechan Naicker about the benefits of outsourcing to South Africa, the market segments they service there, and any advice he had to offer from his 20+ years in the industry.
Barry Matties: First, tell our readers a little bit about your company and what you do?
Nechan Naicker: EDA Technologies is a concept-to-complete electronics solutions company founded over 20 years ago. We've always been involved with PC boards. Back in the day we sold and supported P-CAD, one of the earliest PCB design tools working on DOS, developed by IBM for their own use and later sold off. PCAD changed owners numerous times and evolved until what we have today in Altium Designer. Over the 20 years of selling and supporting PCB CAD tools, we’ve obviously done a lot of training.
Being at the bottom tip of Africa, people always imagine that we have lions running around in the streets. They do sometimes, but thankfully not where I live. What's interesting is that most of the people that I speak to have no idea how advanced South Africa’s electronics industry is. To give you an idea, a large part of SAAB’s electronics engineering is done in South Africa, employing a few hundred engineers. We have many hundreds of engineering contacts in our database, so I would say that South Africa has a thriving and advanced electronics industry.
Matties: Expand a little on EDA Technologies and the services you offer.
Naicker: Originally, we started as a PCB design house, but then we also started to sell and support PCB CAD tools. Today we offer turnkey electronics engineering and manufacturing services, using local and global manufacturers. Many companies don't have the expertise or the resources in-house to do full electronics development, so that's where we come in. We look after the full development and supply chain so that clients can focus on their core business.
Matties: And you're selling the tools as well?
Naicker: Yes, so we have been a reseller for Altium in South Africa for many years. Altium is the most widely used PCB tool in South Africa. Since we have also used Altium Designer to design exceptionally complex designs, our understanding of the tool is of the highest level so that we can quickly assist our customers with support.
Matties: My understanding is that the Chinese bring a lot of investment and infrastructure into this region as well, such as highways. Is that the case?
Naicker: Yes. Africa is rich in minerals, so copper is a big commodity along with other sought-after minerals. The Chinese investors have purchased entire mineral mines in parts of Africa, like Botswana. In exchange, they may build roads and put up some infrastructure.
Matties: You've been doing design for many years. What sort of design changes have you seen over the years that surprised you?
Naicker: EDA has been designing and manufacturing multilayer PCBs of 12 layers and above for over 15 years now, so this is nothing new. I would say that the technology that intrigued me most recently was the need for embedded copper coin technology. Due to high power demands in electronic systems like RF designs, there's a big need for embedded copper in the PCB to handle the heat distribution and large currents. So, manufacturers mill out a piece of the PCB, insert precisely crafted copper in the cavity, plate over it, and the result is one of the best thermal conductivity solution available on PCBs.
To read this entire interview, which appeared in the March 2018 issue of Design007 Magazine, click here.
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
MacDermid Alpha Presents at SMTA New Delhi, Bangalore Chapter, on Flux–OSP Interaction
09/09/2025 | MacDermid Alpha Electronics SolutionsMacDermid Alpha contributes technical insights on OSP solderability at the Bangalore Chapter, SMTA reinforcing commitment to knowledge-sharing and industry collaboration.
Elephantech Selected for NEDO’s Deep-Tech Startups Support Program in the Green Transformation field
09/09/2025 | ElephantechElephantech is pleased to announce its selection for the Demonstration development for Mass Production (DMP) phase of the 4th round of the Deep-Tech Startups Support Program in the Green Transformation field (GX) by NEDO, the New Energy and Industrial Technology Development Organization of Japan.
Ynvisible Celebrates Inauguration of New Production Facility in Norrköping, Sweden
09/09/2025 | Ynvisible Interactive Inc.Ynvisible Interactive Inc., a pioneer in sustainable and scalable e-paper display technology and printed electronics, is pleased to announce the successful inauguration of its new roll-to-roll production facility in Norrköping, Sweden – a city globally recognized as a center of excellence for Printed and Organic Electronics.
Sypris Wins Contract for Classified Missile Avionics Program
09/09/2025 | Sypris Solutions Inc.Sypris Electronics, LLC, a subsidiary of Sypris Solutions, Inc., announced that it has received a follow-on contract award to manufacture and test advanced electronic power supply modules for integration into the avionics suite of a classified, mission-critical missile program. Production is scheduled to begin in 2026.
Safran, PGZ Reinforce Defense Partnership Through Innovation and Local Industrial Cooperation
09/08/2025 | SafranSafran Electronics & Defense, a leading European high-technology company in aerospace and defense, and Polska Grupa Zbrojeniowa S.A. (PGZ), Poland’s primary defense industry leader, have signed two Memorandums of Understanding (MoU) to further expand their collaboration in support of European security and industrial cooperation during the International Defense Industry Exhibition (MSPO) held in Kielce.