-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueCounterfeit Concerns
The distribution of counterfeit parts has become much more sophisticated in the past decade, and there's no reason to believe that trend is going to be stopping any time soon. What might crop up in the near future?
Solder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - smt007 Magazine
3D Printing and Medical Electronics: A Disruptive Beneficial Technology
December 11, 2018 | Dan Feinberg, Technology Editor, I-Connect007Estimated reading time: 3 minutes
It seems that every few months, we hear about new advances in disruptive technologies. As these technologies become accepted to a greater degree, there are additional areas to research. One of the areas we have been following is additive/semi-additive 3D manufacturing with PCB fabrication as the main focus.
However, another innovative area is 3D-printed manufactured devices, replacement body parts, and medications in the medical industry. We are seeing significant advances and increased uses for 3D manufacturing in medicine—many more than 3D-printed and conductive circuits on device structural components (e.g., conductors printed on a device wall or structural angle, etc.). There is enough movement in this area that 3D additive fabrication in medicine—including but not limited to 3D-printed circuits—has become its own topic, and one that we will be watching and continuing to cover.
Overview
First, let’s take a look at the present status of this segment to set a foundation for future coverage, especially as we are about to enter the high-tech trade show season where new advances will be introduced. Since we are discussing 3D-printed devices that are used on or in the human body, let’s review the Food and Drug Administration (FDA) definition.
“3D printing is a type of additive manufacturing. There are several types of additive manufacturing, but the terms ‘3D printing’ and ‘additive manufacturing’ are often used interchangeably. Here, we will refer to both as 3D printing for simplicity. 3D printing is a process that creates a three-dimensional object by building successive layers of raw material. Each new layer is attached to the previous one until the object is complete. Objects are produced from a digital 3D file, such as a computer-aided design (CAD) drawing or a magnetic resonance image (MRI). The flexibility of 3D printing allows designers to make changes easily without the need to set up additional equipment or tools. It also enables manufacturers to create devices matched to a patient’s anatomy (patient-specific devices) or devices with very complex internal structures. These capabilities have sparked huge interest in the 3D printing of medical devices and other products, including food, household items, and automotive parts.”
Figure 1: 3D-printed dentures.
As those of you who have followed our coverage of disruptive technologies know, 3D additive technology has transformed many industry segments already, which includes significant changes to the medical and dental industries. 3D printing has been used to manufacture dentures and other oral implants for years but is also proving to be useful in other areas (Figure 1). For example, I recently chose to have a tooth replaced with an implant. In the past, it was necessary for the oral surgeon to take numerous X-rays from differing angles, combine them, and use them to measure and create the specifications for the implant fabricator. This time, I only had to do a single 360° 3D image that allowed the surgeon to design the perfect implant at the exact size and shape needed with CAD. The entire process took 15 minutes. It is no wonder that fast, high-quality 3D scanning has replaced X-rays as the preferred method of gathering the necessary data for so many areas of medicine.
Beyond dental devices, 3D printing is also being used to manufacture an entirely new generation of advanced medical implants that can be customized for individual patients’ bodies. It is also starting to become commonly used in numerous areas, such as surgery planning and patient consultations. In addition, as we have seen at the last few consumer electronics shows (CESs), 3D-printed manufacturing technology is revolutionizing the prosthetic and assistive devices segments. 3D-printed manufacturing is now providing access to reasonably priced, highly customized and optimized prosthetics for individual needs on a case-by-case basis (Figure 2).
Figure 2: 3D prosthetic.
According to a new market report from London-based industrial research firm Future Market Insights, the unexpected growth of the 3D-printed medical devices market is likely to be a fixture for some time to come. The report notes that medical communities worldwide are adopting 3D printing technology, and the use of 3D-printed devices at a consistent and rapid pace. It adds that the technology is leading to significantly improved quality of care for patients and is capable of reducing the average procedure time for most surgical applications.
This new industry benefits patients, and it also provides great improvements for doctors and hospitals by lowering the strain placed on already overworked staff. Overall, 3D printing leads to lower costs, which benefits those who would never have been able to afford traditionally manufactured devices. Now, people can afford and use greatly improved devices—such as my dental implant—rather than having to have a false tooth like my parents’ generation had to endure.
To read the full article, which appeared in the November 2018 issue of SMT007 Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
10/25/2024 | Marcy LaRont, I-Connect007Just this month, the Fall issue of IPC Community was released, spotlighting the global activities of IPC and its members. SMT007 Magazine covers the scary situation around counterfeit components. Design007 Magazine is not playing tricks with its hard-hitting discussions about “partial HDI.” (If you are asking yourself what that is, you really need to take a look.) Finally, PCB007 Magazine’s alternate metallization issue offers some real treats, including an interview featured this past week with Carmichael Gugliotti of MacDermid Alpha. In you’re in the U.S., here’s to an early Happy Halloween.
Exploring Advanced PCB Final Finishing: DIG, RAIG Technologies
10/24/2024 | Rich DePoto, UyemuraIn this interview, Rich DePoto of Uyemura provides a deep overview and explanation of Reduction-assisted Immersion Gold (RAIG) and direct immersion gold (DIG) technology, and their applications and benefits when compared to traditional final finishes. He delves into the intricacies of electroless nickel corrosion and “black pad,” exploring its causes, consequences, and the measures that can be taken to mitigate this problem. This comprehensive overview will provide insight toward sound decision-making for those operating in environments where perfect process control is a challenge.
2024 IPC CEMAC China Electronics Manufacturing Annual Conference Focuses on the Electronics Industry’s Future
10/24/2024 | IPCThe 2024 IPC CEMAC China Electronics Manufacturing Annual Conference, co-organized by IPC and the Shanghai Pudong New Area Quality Technology Association, kicked off with a grand opening ceremony in Shanghai. Themed "Making Your Imagination Reality," the event has brought together leaders, technical experts, and corporate representatives from the global electronics manufacturing industry to explore future trends and opportunities.
Highlights of the ICT 50th Anniversary Symposium
10/24/2024 | Pete Starkey, I-Connect007Why does it always rain when I attend these events? Temperatures were dropping, daylight was shrinking, and there were seasonal colour changes in wet hedgerows as I travelled to Gloucestershire for the 50th Anniversary Symposium of the Institute of Circuit Technology at Puckrup Hall near Tewkesbury in mid-October. It was a memorable occasion: Nostalgic for my contemporaries who remembered our industry at its most prosperous, technically outstanding in the quality and significance of presentations to an attentive audience of printed circuit professionals, and complemented by the sharing of ideas, information, and trade gossip within a friendly community at the evening gathering.
Global Citizenship: Comparing and Contrasting the U.S. and China PCB Industries
10/23/2024 | Tom Yang -- Column: Global CitizenshipI have spent a lot of time in the U.S., and one question I am frequently asked is about the differences between the Chinese and U.S. PCB industries. It’s always an interesting question, and I will try to answer it in this month’s column. Certainly, the U.S. was the leader in PCB manufacturing, including developing the processes and technology, which it taught to the Chinese in the late 1980s and ’90s. As a result, China has become a force to be reckoned with in the global PCB market. Having been educated in America and now leading a major PCB manufacturing company in China, I have a unique vantage point when it comes to comparing the two nations’ approaches to PCB production.