Trouble in Your Tank: Understanding Interconnect Defects, Part 1
It’s Only Common Sense: Marketing Isn’t Fluff, It’s Ammunition
Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
Printed Circuits Installs New Notion n.jet Direct Solder Mask and Legend Printer
October 15, 2019 | Printed CircuitsEstimated reading time: 2 minutes
Rigid-flex circuit board manufacturer Printed Circuits has purchased and will install a new Notion Systems n.jet direct solder mask and legend ink printer.
Printing solder mask and legend ink directly onto rigid flex printed circuit boards eliminates process steps, accelerates productivity, improves accuracy and solder mask dam integrity. Direct printing is the next generation technology for manufacturing advanced printed circuit boards. The machine also offers four point alignment to accurately align the mask to dimensional changes, such as offset, or rotation or even for trapezoidal distortion – critical capabilities for rigid flex designs. The machine is also capable of printing nomenclature with sequential serialization as well as bar code and QR code marking capabilities.
“We are very excited to bring this new technology in house,” said Matt Tannehill, Printed Circuit’s executive vice president. “Direct printing of solder mask is a terrific improvement for us, it eliminates five process steps compared to the way we have been printing mask, it is 100% additive with no waste or mess, and each pass takes 38 seconds. One panel, with solder mask and nomenclature on both sides, can be done in less than three minutes. This will give our customers a much better product, at a higher quality, while increasing our productivity in a much smaller footprint."
“We are delighted to partner with Printed Circuits in the introduction of direct additive printing to add to their capabilities,” said Peter Walshe, PCB executive director at Notion Systems GmbH. “The n.jet solder mask comes from a high accuracy and repeatability engineering background and offers numerous radical advances for PCB printing, including a unique vacuum hold down table to ensure the resist is only ever printed where it is required. Printed Circuits also had a wide range of optional extras in choosing their machine.”
About Printed Circuits
Printed Circuits is a US manufacturer of multilayer flex and rigid-flex printed circuit boards with over 40 years of experience building circuits typically used in high reliability applications such as medical, military and commercial electronics where customers place a premium on reliability, package density, and weight. For more information, visit us at printedcircuits.com.
About Notion systems GmbH
Notion System is the future of mass production additive manufacturing. The n.jet inkjet platform from Notion Systems is used by customers to produce printed circuit boards, OLED & QLED displays, sensors and high quality 3D parts. Notion Systems relies on decades of experience of their staff in bringing precise inkjet systems to customers and scaling up digital printing processes for functional material.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Learning With Leo: UHDI—The Next Leap in PCB Manufacturing
11/05/2025 | Leo Lambert -- Column: Learning With LeoHigh density interconnect (HDI) technology has been a cornerstone of miniaturized electronics since Hewlett-Packard introduced the first chip-scale implementation in 1982. Over time, HDI processes became central to organic flip-chip packaging in the semiconductor industry. Today, the convergence of IC substrates and system-level PCBs has accelerated the adoption of UHDI.
BTU International Earns 2025 Step-by-Step Excellence Award for Its Aqua Scrub™ Flux Management System
10/29/2025 | BTU International, Inc.BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing market, has been recognized with a 2025 Step-by-Step Excellence Award (SbSEA) for its Aqua Scrub™ Flux Management Technology, featured on the company’s Pyramax™ and Aurora™ reflow ovens.
On the Line With… Ultra HDI Podcast—Episode 7: “Solder Mask: Beyond the Traces,” Now Available
10/31/2025 | I-Connect007I-Connect007 is excited to announce the release of the seventh episode of its 12-part podcast series, On the Line With… American Standard Circuits: Ultra HDI. In this episode, “Solder Mask: Beyond the Traces,” host Nolan Johnson sits down with John Johnson, Director of Quality and Advanced Technology at American Standard Circuits, to explore the essential role that solder mask plays in the Ultra HDI (UHDI) manufacturing process.
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.