Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Nolan’s Notes: Soldering Technologies
Seica, Inc. Adds Zdatum Test House and Demo Center in Los Angeles
January 31, 2020 | SeicaEstimated reading time: 2 minutes
John Zabaldo, President and General Manager of Zdatum, recently purchased a Seica Pilot V8 Next Series Flying Prober and plans to begin full test services starting in the early Spring of 2020. The Pilot V8 Next Series is Seica’s flagship flying prober and offers a full array of test capabilities.
John understands that to benefit his current and future customers the most, their demands require a quick turn capability that Zdatum will be able to perform with their knowledge of the industry and the technological capabilities that the Pilot V8 Next Series Flying Prober will provide. With 20 years of experience as a service provider in the electronics industry, John at Zdatum understands the demand for quick-turn service on the ever-increasing complexity of circuit board assemblies. With his knowledge, and the technological capabilities the Pilot V8 Next Series Flying Prober offers, Zdatum will be able to fulfill the demand for simple to complex quick-turn Testing within Southern California’s thriving electronics industry.
To understand the excitement from Zdatum, here is an excerpt from the GM of Zdatum, John Zapaldo:
“Zdatum is truly excited to add Seica Flying Probe Testing service to our range of Printed Circuit Board services. From PCB Design, Fabrication, Part Procurement, Assembly, to Testing, our circle of services is now complete. We know offering in-house Seica Flying Probe Testing will greatly enhance the value of Zdatum to current and new customers alike.”
In addition, Vice President of Seica Inc. David Sigillo offers his thoughts as well:
“Seica Inc., is proud to support Zdatum in this new endeavor as a Test House but also to help them advance their in-house testing needs for their own clients. With the Seica Pilot V8 Next, Zdatum which is also a ‘Design House” will be able to use the “V8” for product design validation as well. So, from design validation, prototype and production test they will have even superior capabilities than most in their market. Seica will be with them every step of the way!”
The partnership between Seica and Zdatum will be a huge benefit to customers in the West Coast and beyond, who require their circuits boards to be tested. Zdatum will also be available to host a demonstration on their Pilot V8 Next Series to those interested in acquiring a flying prober of their very own. Please reach out to John Zabaldo at Zdatum or Seica for any of your testing needs! We look forward to servicing you.
Share on:
Suggested Items
Spotlight on PEDC: Filbert Arzola
12/19/2024 | Andy Shaughnessy, Design007 MagazineIPC and FED have teamed up to create a new PCB design conference in Vienna, Austria. The Pan-European Electronics Design Conference (PEDC) takes place Jan. 29-30 at the NH Danube City hotel in Vienna. Raytheon’s Filbert Arzola is presenting “Engineering and Adapting Model-based PCB Design in Step with Sustainability and Digital Twins” at PEDC. I asked Filbert to discuss what attendees can expect from his class.
Avnet Insights: Engineers Outline Opportunity for AI
12/19/2024 | AvnetFor the fourth consecutive year, Avnet, Inc. (Nasdaq: AVT) will release its Avnet Insights survey, which has been keeping a pulse on how engineers are responding to the market since 2021. This year’s survey examines technology’s new frontier: Artificial Intelligence, and the promise – and challenges – it presents for product design.
IPC/WHMA Launches Groundbreaking Online Course on Wire Harness Design
12/18/2024 | IPCIPC/WHMA is excited to announce the launch of its new online instructor-led training course, "Introduction to Wire Harness Design I," available now through the IPC EDGE Learning Management System.
The Companion Guide to 'Designing for Reality' by Matt Stevenson Now Available
12/19/2024 | I-Connect007I-Connect007 is excited to announce the release of "The Companion Guide to...Designing for Reality," written by Matt Stevenson of ASC Sunstone Circuits. This essential resource builds on the foundational insights presented in "The Printed Circuit Designer’s Guide to... Designing for Reality" and delivers advanced strategies for scaling PCB production.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.