Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
Global Sourcing Spotlight: Balancing Speed and Flexibility Without Sacrificing Control
SMT Perspectives & Prospects: Artificial Intelligence Part 6: Data Module 1
Dow Introduces First Solventless Silicone Conformal Coating
February 6, 2020 | DowEstimated reading time: 2 minutes
Dow (NYSE: Dow) introduced today at IPC APEX EXPO 2020 new DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating, the industry’s first solventless silicone conformal coating with an ultraviolet (UV) and moisture dual cure system for high throughputs. This new environmentally responsible silicone technology promotes sustainability, health and safety while reducing processing costs through automated spraying and fast, energy-efficient UV curing. Other silicones support UV curing, but none are conformal coatings with a low enough viscosity for spray coating and with a secondary moisture cure for shadowed areas. The new DOWSIL™ product also offers more reliable protection against stress and thermal cycling versus competitive materials.
Brian J. Chislea, senior electronics application engineer at Dow, will discuss the new DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating during two poster sessions at IPC APEX EXPO. The first session is scheduled for today, Tuesday, Feb. 4, from 10:00 to 10:30 a.m. Pacific Standard Time (PST). The second is scheduled for Wednesday, Feb. 5, from 4:30 to 5:00 p.m. PST.
“Dow has long been an innovative leader and developer of leading-edge conformal coating technologies that address our customers’ most pressing needs,” said Chislea. “DOWSIL™ CC-8030 Coating is an excellent example of this. “By listening closely to our customers, we responded with this first-of-its-kind material that can help electronics manufacturers meet their sustainability and productivity goals, and more.”
DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating is an environmentally progressive solution for protecting rigid printed circuit boards (PCBs), sensitive electronic components and fine-pitch designs from environments with airborne contaminants. This high-performance silicone conformal coating is formulated without benzene, toluene, ethylbenzene or xylene (BTEX) solvents. The new DOWSIL™ Conformal Coating also has a low modulus for delicate components and high elongation for reliable protection against stress. To provide an even greater level of PCB protection, DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating can be applied in multiple layers. Compared to leading acrylated urethane UV cure coatings, the new silicone-based Dow technology provides superior protection against thermal cycling.
A soft, medium-viscosity silicone, DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating has a rheology that is designed for high-throughput spray coating. Its dual cure technology combines speed with completeness of coverage for reduced work-in-process inventory. With UV curing from a standard mercury broad spectrum lamp at 300 mW/cm^2, the DOWSIL™ coating is tack-free after less than 10 seconds. Compared to thermal ovens that cure in minutes, UV ovens are also smaller and consume less energy. Further, the new coating’s secondary alkoxy moisture curing reaches any shadowed areas where UV light can’t penetrate, or UV curing is otherwise incomplete. Moisture curing also supports thicker coating and won’t add stress from thermal cycling.
DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating is available globally.
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
New Course Presents a Comprehensive Guide to IPC Standards
10/10/2025 | Marcy LaRont, I-Connect007Francisco Fourcade, electronics technology standards manager for the Global Electronics Association, has spent years helping companies understand and implement the standards that keep the electronics manufacturing industry moving forward. In this interview, he shares updates on ongoing standards development efforts and previews a new course, "IPC Standards: A Guide for the Electronics Industry,” which starts Oct. 14.
North American EMS Industry Shipments Down 1.4% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.26.
North American PCB Industry Sales Up 12.8% in August
10/02/2025 | Global Electronics AssociationThe Global Electronics Association announced the August 2025 findings from its North American Printed Circuit Board (PCB) Statistical Program. The book-to-bill ratio stands at 0.98.
Industry Leaders Shape a Sustainable Future at 2025 IPC CEMAC Electronics Manufacturing Annual Conference
09/30/2025 | Global Electronics AssociationThe 2025 IPC CEMAC Electronics Manufacturing Annual Conference, co-hosted by the Global Electronics Association and the Shanghai Pudong Association for Quality and Technology, successfully concluded on September 26 in Shanghai.