FDA Authorizes the Mechanical Ventilator Milano for COVID-19

Reading time ( words)

In a little more than one month, from March 19 to May 1, the Mechanical Ventilator Milano (MVM) has gone from conception to reality, as it is now shifting to production and to support of patients affected severely by COVID-19. On May 1, 2020, the United States Food and Drug Administration (U.S. FDA) declared that the MVM falls within the scope of the Emergency Use Authorization (EUA) for ventilators.

The MVM is an innovative ventilator, conceived and designed by an international collaboration of particle physicists and developed in cooperation with other relevant scientific communities. Its mechanical design is simple, using a small number of parts to facilitate rapid production. The powerful and complex control unit, programmed by a large number of researchers, results in strong and safe performance for the care and recovery of COVID-19 patients. Achieving this result in a such a short time was made possible thanks to the cooperation of laboratories, institutes, universities and companies mainly across Italy, Canada and the United States, maximizing the benefits that come from the sharing of skills and resources.

The MVM Challenge

A fraction of the people infected with COVID-19 can become severely ill, needing help to breathe. This has created a world-wide demand for ventilators. To address this critical global issue, the MVM collaboration took on the challenge to design, develop, build, and certify a safe and powerful, ventilator. A very important feature of the MVM is the simplicity of its mechanical design, which allows for quick production. Another important feature is the sophisticated control system, which makes available the two ventilation modalities required for the care of COVID-19 patients, while also ensuring ease of use for medical personnel.

The MVM initiative originated in the framework of the GADM Global Argon Dark Matter Collaboration, an international scientific collaboration engaged in the search of dark matter with experiments at Istituto Nazionale di Fisica Nucleare’s Gran Sasso Laboratory in Italy and SNOLAB in Canada. This research involves gas handling systems and complex control systems, the same technologies required in mechanical ventilators.

While in lockdown for the COVID-19 pandemic in Milan, Italy, Cristiano Galbiati (Gran Sasso Science Institute, INFN and Princeton University), the spokesperson for the GADM Collaboration, recognized the need for additional ventilators early in the pandemic. He launched the MVM project and started the development of a first prototype. With support from INFN Italy’s National Institute for Nuclear Physics; groups from the Universities of Bergamo, Brescia, GSSI Gran Sasso Science Institute, Insubria, L’Aquila, Milano Bicocca, Milano “La Statale,” Napoli “Federico II,” Pisa, Pavia, Roma “La Sapienza,” Siena; CNR National Research Council; Istituto Superiore di Sanità; Azienda Ospedaliera San Gerardo of Monza; and Elemaster, project leader and coordinator of the other companies involved AZ Pneumatica, Saturn Magnetic, Bel Power Europe, Nuclear Instruments, CAEN and Camozzi, the MVM collaboration produced an initial prototype, which fully demonstrated the viability of the conceptual design.

The laboratory facility for the development of the first units was made available by Elemaster S.p.A of Lomagna (LC), Italy. In addition to creating the MVM controller printed circuit board in-house, Elemaster also led the assembly and prototype testing in collaboration with the partner companies involved. The Elemaster International Design Center, as MVM design authority, led the submission to the U.S. FDA. 

The collaboration quickly expanded to include three national laboratories in Canada, including Canadian Nuclear Laboratories (CNL), TRIUMF and SNOLAB, through the leadership of Nobel laureate, Dr. Arthur McDonald of Queen’s University.

The U.S. collaboration includes people from Fermi National Accelerator Laboratory (Fermilab) and the Princeton Plasma Physics Laboratory, two of the Department of Energy’s national laboratories as well as staff from several US universities.

The European collaboration also includes researchers from: Politecnico di Milano and Museo della Fisica e Centro Studi e Ricerche Enrico Fermi of Italy; APC, SUBATECH and Mines Paris Tech of France; CIEMAT and LSC, CAPA-UZ and ARAD  of Spain; AstroCeNT (CAMK PAN) of Poland; MPA Garching of Germany; University of Toronto of Canada; Rochester University, University of California Los Angeles, University of Houston, University of Massachussets at Amherst, University of Nebraska-Lincoln of the United Stated; Liverpool University and University of Oxford of the United Kingdom.

Getting the MVM ventilator to patients requires collaboration beyond nuclear and particle physicists. Government departments, regulators, manufacturers and health care providers have made valuable contributions to the project.

Clinicians sited in Italy, Canada, and in the United States provided guidance to ensure medical considerations were properly integrated into the design. Anesthesiologists from the COVID-19 wards in Lombardy, one of the districts most severely hit by the pandemics, played a special role in providing detailed guidance for the design of the unit. Detailed testing and qualification of performance was carried out at Ospedale San Gerardo in Monza, Italy.

The MVM Collaboration is being enthusiastically supported by industry partners who are assessing parts availability, evaluating supply chains, and who will soon carry out the mass manufacturing. The laboratory facility for the development of the first units was made available by Elemaster S.p.A. of Lomagna (LC), Italy, which also took primary responsibility for the submission to the U.S. FDA.

Vexos Inc. will manufacture and distribute the MVM Ventilator under an exclusive license from Elemaster for the Americas and other territories. In order to support the demand of the MVM Ventilators, Vexos has formed a special task force team with key members of the engineering, quality, supply chain and manufacturing groups at their ISO 13485:2016 (Quality Management Systems for Medical Devices) accredited facilities in LaGrange, Ohio, USA and Markham, Ontario, Canada. Since March, Vexos has been preparing extra manufacturing capacity and an increased supply chain pipeline for components and materials to meet the expected high demand of MVM ventilators.

To facilitate rapid certification of the final design, additional direction is being provided by Health Canada, the US Air Force, the US FDA, the Italian “Ministero della Salute” (Ministry of Health), and the Italian “Istituto Superiore di Sanità.”

The MVM Design

The MVM ventilator is inspired by the Manley ventilator, which was developed by Roger Manley in  1961, based on “the possibility of using the pressure of the gases from the anesthetic machine as the motive power for a simple apparatus to ventilate the lungs of the patients in the operating theatre”.  The MVM is designed to similarly meet the requirements of a ventilator as simply as possible.  The MVM also incorporates advanced features directly recommended by anesthesiologists participating who provided care for COVID-19 patients in Lombardy, the region in Italy most severely hit by the COVID-19 epidemics. The MVM features electrically driven pneumatic valves rather than mechanical switches and uses a stripped-down mechanical design. This enables fast progress from design to quick, inexpensive mass production of safe, reliable ventilators for hospitals and patients around the world. The modular design can also be adapted to swap out parts based on their availability in different regions of the world.

The final design of the MVM ventilator will soon be released on arXiv.org. It will be licensed under the CERN OHL v2.0 by the Fondazione Aria.

“When, from the inception of the diffusion of pandemics in Italy, it became clear that many patients would have needed respiratory assistance, we decided to make available our knowledge and ability to cooperate to build a new, powerful yet safe, accessible, and easy to replicate ventilator," Cristiano Galbiati said. "MVM is a new paradigm and shows the incredible impact that basic research can have on society, thanks to its unique capacity to generate new knowledge and technological innovation.  It also highlights the importance of international and multidisciplinary collaboration to tackle the big challenges of this new era: at a time when borders between countries were closed and supply chains were disrupted, our collaboration across borders spread much faster than the virus, moving at the speed of light through the internet fibers.  The inclusion of the MVM within the scope of the FDA EUA for ventilators is a major milestone and a source of great satisfaction: our Mechanical Ventilator Milan is now a reality, and we hope it will contribute to saving many lives.”

Art McDonald added, “We in Canada have been very pleased to participate in the development of this new ventilator design.  For me personally it has been wonderful to work with an international team covering such a broad range of expertise, working extremely hard to save lives in these difficult times.  Everyone is very happy that their talents can make a difference, a true humanitarian spirit.”

Gabriele Cogliati, President & CEO of Elemaster S.p.a. Electronic Technologies, explained, “We responded with enthusiasm to the request of collaboration received from the international scientific community coordinated by Professor Cristiano Galbiati and Professor Arthur McDonald, Physics Nobel laureate 2015. Elemaster put at disposal a full time team of over 40 specialists involved in project management, engineering design and process technologies control, printed circuits boards development and production, with the aim to develop, industrialize and manufacture in record time first protypes batches of MVM Milano Ventilatore Meccanico, coordinating other involved companies, too. This product is compliant to all the international standard requirements of the project, which was made with the full contribution of the international scientific community, and it’s revolutionary as it is easy to use and replicable all other the world.”



Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/23/2021 | Andy Shaughnessy, I-Connect007
This week, we bring you a wide swath of news, columns, and articles from the past week. Altium announced a new cloud platform that connects design stakeholders with users of its Altium 365 environment. Cadence Design Systems has acquired a company that develops computational fluid dynamics technology to help expand its system analysis offerings.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

03/05/2021 | Nolan Johnson, I-Connect007
A perennial and yet irregular category on the popular game show Jeopardy is “potpourri.” My dad, as I was growing up, pronounced the word as “pot-poury.” It wasn’t until I was a sophomore in college that my girlfriend’s mom—who had a penchant for a soupcon of French euphemism in her tête-à-têtes—pronounced the word properly: “po-pu-ree.” Such are the risks of growing up just a bit rural.

Chapter 2 Excerpt from the Book ‘Thermal Management: A Fabricator's Perspective’

12/21/2020 | Anaya Vardya, American Standard Circuits
Insulated metal PCBs (IMPCB) or metal-clad PCBs (MCPCB) are a thermal management design that utilizes a layer of solid metal to dissipate the heat generated by the various components on the PCBs. When metal is attached to a PCB, the bonding material can either be thermally conductive but electrically isolative (IMPCBs or MCPCBs), or in the case of RF/microwave circuits, the bonding material may be both electrically and thermally conductive. The reason that RF designers usually have the bonding material thermally and electrically conductive is that they are using this not only as a heat sink but also as part of the ground layer. The design considerations are quite different for these different applications.

Copyright © 2021 I-Connect007. All rights reserved.