Knocking Down the Bone Pile: Precision Milling of Underfilled SMT Components
Learning with Leo: Drones—Meeting Demand Without Compromise
Nolan’s Notes: Our Spotlight on North America
Just Ask Greg: Advice on Purchasing SMT Stencils
October 21, 2020 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
We asked you to send in your questions for Happy Holden, Joe Fjelstad, Eric Camden, and John Mitchell in our “Just Ask” series. Now, Greg Smith, an SMT007 columnist, gets a chance to answer a question.
Greg Smith has worked in the electronics industry since 1989. He was the owner and president of a stencil manufacturing company for 23 years before joining Fineline Stencil. After the merger of Fineline Stencil and MET, he became the manager of stencil technology for BlueRing Stencils. Greg writes and presents white papers, works with customers on stencil design, and performs root-cause analyses to improve customer yields.
We hope you enjoy “Just Ask Greg.”
Q: Should we buy just the foil, or do you think that it’s better to buy and keep them on the same frame for repeat orders?
A: There are several options when purchasing SMT stencils. The first option is framed stencils, where a polyester mesh is mounted to an aluminum frame, and the stencil foil is then mounted to the polyester mesh. The mesh is then removed within the stencil foil, leaving a very uniform tension on the foil from all four sides. This is historically the best method for using SMT stencils. When the stencil is needed, it can be placed directly into the printer, used, cleaned, and then placed back in storage.
With this traditional framed stencil, there are no worries about tensioning bladders that can leak during the mounting or de-mounting process or springs that can become week over time. However, some of these frames require more storage space than the non-traditional “frameless” systems available.
The second type of frame option is foils with tensioning systems around the sides of the foils, such as DEK VectorGuard™, Apshen, and QTS systems. These fit into “master frames,” and tension is applied to the foils before printing. These are good options when stencil storage is at a premium while still providing even tension on the stencil foil during the print process. It is not recommended to order stencils that are not tensioned in some way during the print process.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Road to Reliability: Engineering High Uptime EV Charging Infrastructure
05/13/2026 | Stanton Rak, SF Rak CompanyThe transition to EVs is no longer constrained solely by vehicle capability. Instead, it is increasingly defined by a simpler, but more unforgiving question: Will the charger work when I arrive? This high uptime does not happen by accident. As EV technology has matured, limitations in battery range, power electronics, and thermal management are no longer the primary barriers to adoption.
Lightium Selects Aras Innovator to Support Development of Photonic AI Chips
05/12/2026 | BUSINESS WIREAras, a leading provider of digital thread solutions for product lifecycle management (PLM) and engineering AI, announced that Lightium, a Switzerland-based startup specializing in photonic integrated circuits (PICs), has selected Aras Innovator® to establish a connected foundation for managing the complexity of its photonic chip development.
KYZEN to Focus on Aqueous and Stencil Cleaning Solutions at SMTA Juarez Expo and Tech Forum
05/12/2026 | KYZENKYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Monterrey Expo & Tech Forum scheduled to take place on Thursday, May 21 at Injectronics Convention Center in Ciudad Juarez, Chihuahua.
HFR Accelerates GPU-Based AI-RAN Development with ETRI
05/11/2026 | PRNewswireHFR, Inc., a leading telecommunications equipment provider, announced that it has launched the full-scale development of 'AI-RAN,' widely considered the core technology for 6G.
TLT Electronics Officially Opens Facility in Vietnam
05/06/2026 | TLT ElectronicsLithuanian EMS provider TLT Electronics has recently announced the opening of a new facility in Vietnam. For their clients, this is a chance to expand manufacturing into a second region without the headache of onboarding a new supplier. Same team, same processes, same quality standards — still TLT Manufacturing, just on another continent.