Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
Beyond Design: Refining Design Constraints
The Pulse: Design Constraints for the Next Generation
Rising Star Award Winner: Radu Diaconescu
April 5, 2021 | Radu Diaconescu, Swio.ioEstimated reading time: 2 minutes
Last year’s IPC APEX EXPO, which took place in sunny San Diego, seems to have taken place in a different world. This was a world where talks were held in front of a large crowd, not a monitor, and travelling to the other side of the world wasn’t considered a reckless risk.
By February 2020, however, we were starting to grasp the seriousness of the situation. Back then, there were a lot of things that we didn’t know, and more importantly, there were a lot of things that we had no clue that we didn’t know. The concept of “knowing what you don’t know” or figuring out the areas where one lacks knowledge is probably as important as acquiring the knowledge itself.
Coming “back to the future” and attending the IPC APEX EXPO 2021 virtually, it seems that we as an industry start to finally understand and discover the things that we don’t know. From the integrity and resilience of our supply chain to the failed digital transformations of the past, it seems that the electronics manufacturing industry starts to realize that change is difficult, but also inevitable.
Changes, Revolutions, Evolutions
Ever since the term “Industry 4.0” was coined back in 2015-16, there were several technologies that seemed to lead the way to the “promised land” of transformation. We believed that big data, IoT, IIoT, AI, ML, autonomous vehicles and so many other technological advances would radically change our operations and deliver the holy grail of billions of dollars of savings. While being a firm believer in the benefits of all these technologies, the reality, as we were brutally reminded in the past 12 months, is much more complex. At the end of the day, to paraphrase Travis Hessman’s keynote speech, digital transformation was never supposed to be a revolution, but rather an evolution.
There’s no silver bullet that will magically solve all of our problems and I think the 56% of manufacturing companies that are still waiting for the right use case for digital transformation or the 60% of digitization projects stuck in the “proof of concept” stage are a testament to that. Revolutions are tough, but evolution is a continuous process. Instead of focusing on Industry 4.0, 5.0, or whatever might come next, we should adapt our mindset to one of a continuous evolution and treat digital transformation the same way we treat quality.
To read this entire article, which appeared in the 2021 edition of Show & Tell Magazine, click here.
Share on:
Suggested Items
The Government Circuit: Three Inescapable Conclusions About Global Trade Policies
07/17/2025 | Chris Mitchell -- Column: The Government CircuitAmid a series of recent moves by U.S. President Donald Trump to escalate trade policy pressure on key U.S. partners, including Europe, Canada, Mexico, Japan, and Malaysia, the Global Electronics Association’s recent report on global trade flows in the electronics industry is overflowing with relevant insights. The main message is that electronics supply chains are more globally integrated than any other industry, surpassing even the automotive sector in cross-border complexity.
The Wire Association International’s Wire Expo to Co-Locate with the Electrical Wire Processing Technology Expo (EWPTE)
07/16/2025 | Global Electronics AssociationThe Wire Association International Inc. (WAI) announces plans to co-locate its biennial Wire Expo with the Wiring Harness Manufacturer’s Association (WHMA)/Global Electronics Association’s Electrical Wire Processing Technology Expo (EWPTE) May 6-7, 2026. The two shows will co-locate at the Baird Center, Milwaukee, Wisconsin, USA.
The Pulse: Design Constraints for the Next Generation
07/16/2025 | Martyn Gaudion -- Column: The PulseIn Europe, where engineering careers were once seen as unpopular and lacking street credibility, we have been witnessing a turnaround in the past few years. The industry is now welcoming a new cohort of designers and engineers as people are showing a newfound interest in the profession.
Flexible Circuit Technologies Welcomes Regional Business Development Manager Derek Rossberg
07/15/2025 | Flexible Circuit TechnologiesFlexible Circuit Technologies a Minnesota-based flexible circuit and advanced electronics contract manufacturer, welcomes Derek Rossberg as Regional Business Development Manager.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.