-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueSolder Printing
In this issue, we turn a discerning eye to solder paste printing. As apertures shrink, and the requirement for multiple thicknesses of paste on the same board becomes more commonplace, consistently and accurately applying paste becomes ever more challenging.
A Culture of Thriving
One cannot simply command thriving; it must be nurtured, developed, and encouraged. In this issue, we explore strategies to improve your working relationship model—both internally and externally. In this culture of thriving, your business will grow in the process.
Certifications
Certifications have historically been seen as a cost of doing business, but how do we turn them into a positive ROI and a value to both customer and vendor?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Don’t Allow Standards to Get the Better of You
August 31, 2015 | Michael Ford, Mentor Graphics Valor DivisionEstimated reading time: 2 minutes
![](https://iconnect007.com/application/files/6616/3116/1056/Michael_Ford-300.jpg)
A standard should be complete, unequivocal, and consistent; it should be something that everyone can use and understand, promoting quality, responsibility, conformance, and compliance, as well as openness and visibility of information. In the electronics manufacturing industry, this just doesn’t seem to be the case, with so many different so-called standards for everything ranging from operational rules and documentation, to quality and traceability, which are confusing, incomplete, and represent a major cost and waste to manufacturing. Top-tier OEM companies are frustrated that they cannot get the information that they need, while manufacturers are also frustrated that they have so many different mandates to follow.
Surely, in the coming Internet of Manufacturing (IoM) age, where standardization of communication and storage of information will be critical, the current way in which we approach and adopt standards in electronics manufacturing cannot prevail, can it?
When OEM companies all did their own PCB assembly manufacturing in-house, it was the age of the engineer. Industrial engineers were responsible for the specification and execution of the various production processes and flows that connected them together.
Quality management engineers ensured that all products that left the factory were free of defects. The science of quality management and control as well as that of industrial engineering progressed rapidly. The comparison of market defect analysis with internal quality reports led to active quality management so that the scope and risk of defect creation during production execution is a part of the process specification. The two engineering families in many cases now work together very closely, or as one.
Within a vertically integrated manufacturing operation, the control and management of quality yielded more than just one order of magnitude reduction of defects, both internally and externally in the market, an important factor for all brand name companies as the cost of poor quality in the market can significantly affect sales.
The market then changed direction, where many companies decided that instead of a “profitless” manufacturing operation overhead, the use of EMS outsourcing was a good way to go. The lure included the ability to manufacture products in lower cost areas of the world without the need for investment, where specialist manufacturing companies would have access to greater discounts on material. How though to ensure that these remote external contractors would achieve the same levels of quality as the experienced in-house teams? Documentation related to internal manufacturing practices were formalized into standards. Many of these started out as based on the internal individual company practice.
Two key principles of control were formed, one that the process operation and flow would conform which the OEM needed, and the other pertaining to data collection as proof of correct operation, which doubled as a quality assurance tool, although this latter case is less used than many would believe.
Editor's Note: This article originally appeared in the August 2015 issue of SMT Magazine.
Suggested Items
SEMICON India 2024 to Highlight Local Semiconductor Ecosystem Growth and Industry Trends
09/06/2024 | SEMISEMICON India 2024 will bring together global leaders, semiconductor industry experts, academia, and government officials from September 11-13, 2024, at the India Exposition Mart Ltd. (IEML) in Greater Noida, Delhi NCR.
STARTEAM GLOBAL Announces Strategic Partnerships with Notion Systems and Peters Group
09/03/2024 | STARTEAM GLOBALSTARTEAM GLOBAL, an established printed circuit board (PCB) manufacturer with over 35 years of expertise, is pleased to announce new strategic partnerships with two German corporations: Notion Systems GmbH, a manufacturer of inkjet printing systems for functional materials, and Lackwerke Peters GmbH & Co. KG, also known as Peters Group, a full-range supplier of coating materials for electronics and PCBs worldwide.
Audits: A Critical Element of Process Control
09/03/2024 | Randy Cherry, IPCA formal audit always seems difficult to justify. Companies do not want the expense, and employees do not want the hassle. There is always a chance of failure, and management struggles to understand the benefits. If you or your company has had issues with auditing, hopefully, this article will help you feel a little more comfortable about the auditing process.
YES Signs MoU with Tamil Nadu Government
08/30/2024 | PRNewswireYield Engineering Systems (YES) is a leading manufacturer of process equipment for AI and HPC semiconductor solutions. YES announced today that it has signed a Memorandum of Understanding (MoU) with Government of Tamil Nadu.
Electronics Manufacturing Services Market to Grow by $164.6 Billion from 2024-2028
08/30/2024 | PRNewswireThe global electronics manufacturing service market size is estimated to grow by $164.6 billionn from 2024-2028, according to Technavio.