-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueSilicon to Systems: From Soup to Nuts
This month, we asked our expert contributors to weigh in on silicon to systems—what it means to PCB designers and design engineers, EDA companies, and the rest of the PCB supply chain... from soup to nuts.
Cost Drivers
In this month’s issue of Design007 Magazine, our expert contributors explain the impact of cost drivers on PCB designs and the need to consider a design budget. They discuss the myriad design cycle cost adders—hidden and not so hidden—and ways to add value.
Mechatronics
Our expert contributors discuss the advent of mechatronics in PCB design, the challenges and opportunities this creates for circuit board designers, and the benefits—to the employee and the company—of becoming a mechatronics engineer.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Accelerating the PCB Design Cycle
November 4, 2015 | Scott Miller, FreedomCAD ServicesEstimated reading time: 2 minutes
Mylar. Black tape. X-acto knives. Drafting tables. Ring lights.
These were the tools of the trade for the pioneers of printed circuit board design. Manually creating the large artwork that would then be photo-reduced to make the filmwork to image double-sided boards was truly an art form. The best designers were both neat and efficient. Somehow they avoided going home at night with their shirts or skirts covered with bits of tape stuck to them.
For those of you experienced designers, it’s incredible to see how far the art of PCB design has come over these 40+ years of evolution. CAD software has replaced Mylar, and computer screens have replaced lighted drafting tables. And now, it’s more science than art. PCB design now requires puzzle-solving skills on many levels to handle ever-increasing density and speed challenges.
The Need for Speed
By the mid-’90s, technologists were predicting that the use of conductive copper interconnections would need to be replaced with optics in order to address the increasing signal speeds. Year after year, the industry has found ways to increase the capabilities of copper interconnect to meet the escalating challenges. Some of these solutions were materials’ improvements such as high-speed laminates, smooth copper foil, and high-speed connectors. But many were based on PCB design strategies, including the use of back-drilling, reference planes, differential pairs, length matching, hole, pad and anti-pad shapes and sizes. Engineers and designers use many other strategies to maximize performance while minimizing cost.
One thing is clear: Designing printed circuit boards today is much more complicated and challenging than ever. Designing today’s leading-edge circuit boards requires that the designer:
- Has a strong knowledge of the capabilities of the CAD software.
- Understands PCB fabrication processes.
- Has a general knowledge of electronics and component functionality.
- Has a general knowledge of signal and power integrity.
- Understands PCB assembly processes.
- Understands industry specs.
In addition to all of these challenges, designers have to be efficient three-dimensional puzzles solvers because time-to-market is still a vitally important objective. After all, time is money.
So how do today’s designers balance the technical and timing demands? There isn’t one answer. It requires efficient use of the CAD tools, floor planning and effective communication with all parties involved.
Fortunately, Cadence Design Systems, Mentor Graphics, Altium and other PCB CAD software developers continue to make great strides at improving the capabilities of PCB layout tools. This has made it much faster to route differential pairs, create shapes or replicate circuits. And while they strive to make user interfaces logical and easy to use, many capabilities aren’t as obvious.
To read this entire article, which appeared in the October 2015 issue of The PCB Design Magazine, click here.
Suggested Items
Atotech to Participate at KPCA Show 2024
09/03/2024 | AtotechMKS’ Atotech will participate in this year’s KPCA Show 2024 in Incheon, held at Songdo Convensia from September 4-6, 2024.
Victory Announces Breakthrough in PCB Technology with New Product Launch
08/29/2024 | openPRShenzhen Victory Electronics Technology Co., Ltd., a leader in the printed circuit board (PCB) manufacturing industry, is proud to announce the successful development of a groundbreaking new product.
Connect the Dots: Designing for Reality—Electroless Copper
08/28/2024 | Matt Stevenson -- Column: Connect the DotsRoll up your sleeves because it's time to get messy. In a recent episode of I-Connect007’s On the Line with… podcast, we discussed electroless copper deposition. This process deposits a copper layer into the through-holes and vias of what will eventually be a PCB. Electroless copper deposition feels like a black box to many people. It sort of looks like a black box, too. The boards go in one side, come out the other, and emerge differently. So, let's crack open that black box and look inside.
Maximizing ROI Through Better Wet Process Control
08/20/2024 | I-Connect007 Editorial Team“When things get out of control, the variation in your wet process begins,” says Mike Carano,. “Just because they look like good boards and may even pass electrical test, it does not necessarily mean you have good boards. Once the chemistry is headed toward the right or left side of the process control parameter cliff, the plating is compromised. If the copper is thinner than it should be, when the customer puts it into service, the board may fail after 500 cycles vs. the requisite 1,000 or 2,000 cycles. The root cause issue is that you plated 7/10ths of a mil of copper instead of one-mil of copper because you were not controlling your process. The fact that you passed your own electric test becomes inconsequential.”
The Chemical Connection: Controlling an Alkaline Etch Bath With Low Copper Loading
08/07/2024 | Don Ball -- Column: The Chemical ConnectionThis month, I wanted to continue my discussion on how much process control is actually needed for high-density circuit production. However, in the last month, I have been called on to help with a specific process control problem: how to control an alkaline etch bath when you’re not etching much copper. This problem has been cropping up more frequently as smaller shops (and a few larger ones) concentrate on low-volume, high-value plated through-hole panels such as prototypes, resistor cores, etc.