Brain to Robot: 'Move, Please'September 19, 2016 | ETH Zurich
Estimated reading time: 4 minutes
Using the power of thought to control a robot that helps to move a paralysed hand: a project from the ETH Rehabilitation Engineering Laboratory could fundamentally change the therapy and daily lives of stroke patients.
A hand exoskeleton helps stroke patients to integrate rehabilitation exercises into their everyday lives.
One in six people will suffer a stroke in their lifetime. In Switzerland alone, stroke affects 16,000 people every year. Two thirds of those affected suffer from paralysis of the arm. Intensive training can – depending on the extent of damage to the brain – help patients regain a certain degree of control over their arms and hands. This may take the form of classic physio- and occupational therapy, or it may also involve robots.
Roger Gassert, Professor of Rehabilitation Engineering at ETH Zurich, has developed a number of robotic devices that train hand functions and sees this as a good way to support patient therapy. However, both physio- and robot-assisted therapy are usually limited to one or two training sessions a day; and for patients, travelling to and from therapy can also be timeconsuming.
Exoskeletons as exercise robots
“My vision is that instead of performing exercises in an abstract situation at the clinic, patients will be able to integrate them into their daily life at home, supported – depending on the severity of their impairments – by a robot,” Gassert says, presenting an exoskeleton for the hand. He developed the idea for this robotic device together with Professor Jumpei Arata from Kyushu University (Japan) while the latter was working in Gassert’s laboratory during a sabbatical in 2010.
“Existing exoskeletons are heavy, and this is a problem for our patients because it renders them unable to lift their hands,” Gassert says, explaining the concept. The patients also have difficulty feeling objects and exerting the right amount of force. “That’s why we wanted to develop a model that leaves the palm of the hand more or less free, allowing patients to perform daily activities that support not only motor functions but somatosensory functions as well,” he says. Arata developed a mechanism for the finger featuring three overlapping leaf springs. A motor moves the middle spring, which transmits the force to the different segments of the finger through the other two springs. The fingers thus automatically adapt to the shape of the object the patient wants to grasp.
However, the integrated motors brought the weight of the exoskeleton to 250 grams, which in clinical tests proved too heavy for patients. The solution was to remove the motors from the hand and fix them to the patient’s back. The force is transmitted to the exoskeleton using a bicycle brake cable. The hand module now weighs slightly less than 120 grams and is strong enough to lift a litre bottle of mineral water.
Researching brain processes
Gassert is currently driven by the question of what happens in the brain and how commands pass from the brain to reach the extremities after a stroke. “Especially with seriously affected patients, the connection between the brain and the hand is often severely or completely disrupted,” Gassert explains, “so we are looking for a solution that will help patients pass on commands to the robotic device intuitively.” The idea is to detect in the brain a patient’s intention to move his or her hand and directly pass this information on to the exoskeleton. This may also produce a therapeutic benefit. According to Gassert, a number of studies show that it is possible to strengthen existing neural connections between the brain and the hand with regular exercise. An important component for this is that the brain receives somatosensory feedback from the hand when it produces a command to move.
In order to understand what goes on in the brain, Gassert is carrying out fundamental research with clinicians, neuroscientists and therapists. For their research, the scientists can draw on a number of imaging techniques, such as functional magnetic resonance imaging (fMRI), which allows them to map the activities of the whole brain. While this technology allows them to gain fundamental new insights, fMRI is both very expensive and highly complex and consequently not suitable for therapy. “And of course, it’s not portable,” Gassert adds with a mind to his project. He therefore focuses on simpler techniques such as electroencephalography (EEG) – and in particular functional near-infrared spectroscopy (fNIRS), the least expensive of these technologies. Gassert is currently engaged in the challenging task of figuring out whether and how fNIRS can be robustly employed. He is working on this together with a group from the University Hospital, who are contributing their experience in clinical application of the technology.
Another question that is still not fully understood is how the brain controls limbs that interact with the environment. “Here, robotics is making a valuable contribution to basic research because it is ideally suited for capturing a movement, perturbing it and measuring the reaction,” Gassert explains. For example, the robotics experts have developed an exoskeleton that makes it possible to block the knee for 200 milliseconds while walking and extend it by 5 degrees. With the help of sensors, the scientists measure the forces that are involved and use this data to infer how the brain modulates the stiffness of the knee. These findings then flow into applications such as the control of new, active prostheses.
If the researchers succeed in establishing an interaction between the brain and the exoskeleton, the result will be a device that is ideally suited for therapy. If, on the other hand, the deficits are permanent, a robotic device could offer long-term support – as an alternative to invasive methods, which are also being researched. These for instance envisage implanting electrodes in the brain and triggering stimulators in the muscles. However, as long as stroke patients can expect to experience a reasonable degree of recovery, the robot-assisted therapy will be the obvious choice.
STARTEAM GLOBAL Expands Global Footprint with New Smart Manufacturing Factory in Prachinburi, Thailand09/15/2023 | STARTEAM GLOBAL
STARTEAM GLOBAL, a leading manufacturer of Printed Circuit Boards (PCB), technology and service solutions, is pleased to announce the opening of our new PCB manufacturing factory in Prachinburi, Thailand, on Wednesday 27 September 2023.
Flexible circuit applications can be as basic as furnishing electrical interconnect between two conventional circuit board assemblies, or to prove a platform for placing and interconnecting electronic components. During the planning and pre-design phase of the flexible circuit, there will be several material and process related questions that need to be addressed. Most flexible circuit fabricators welcome the opportunity to discuss their customers’ flexible circuit objectives prior to beginning the actual design process.
Electronics are continually evolving, driven by innovations in printed circuit board technology. Flexible PCBs have emerged as a revolutionary force, reshaping the PCB industry and influencing the design and functionality of countless electronic devices. Some believe that flexible PCBs are a relatively newer technology, but as we will see, that is not true. Since I’m an instructor, here’s a short history lesson on how we got here and what we can expect.
ViTrox Showcases Revolutionary Industry 4.0 Full Turnkey SMT PCBA Inspection Solutions at Productronica Germany 202309/13/2023 | ViTrox
ViTrox, which aims to be the world’s most trusted technology company, is thrilled to announce that we will be participating in Productronica Germany, at Booth #A2.504, from 14th to 17th November 2023, in International Congress Center München (ICM), Munich, Germany.
Terran Orbital announced the launch of our Responsive Space Initiative. Under this initiative, we are committed to providing our customers with satellite buses within just 30 days and complete satellite systems with integrated payloads within 60 days.