Latest Articles

Ventec Europe Continues Investment in FOD Elimination

In July, Technical Editor Pete Starkey checked out recent developments at Ventec Europe’s UK Distribution Centre. It was clear that continuing investment was being committed to the establishment and maintenance of meticulous cleanliness in the pre-preg handling areas. Pete recently followed up with Ventec's Mark Goodwin, who provides a company update.

CES 2015: Preview and Predictions

Looking back over the last five years of CES and analyzing predictions and items featured by the large exhibitors, you'd likely assume the 2015 show would feature more advanced 3D TVs, as they were predicted to take over the market...wrong!

Viking Moves On

Technical Editor Pete Starkey says the warmth of the welcome at Viking more than compensated for a three-hour trek through the traffic and southern England's miserable weather: "There was a buzz of excitement about the place and the development workshop was a hive of activity, with a crowd gathered around the CircaPrint digital ink-jet printer, the print-head scanning smoothly in a glow of purple light."

Ventec USA Prepares for Growth

Technical Editor Pete Starkey writes, "IPC APEX EXPO 2014 in Las Vegas, Nevada, gave me the opportunity to catch up with Ventec USA President Jack Pattie and to meet the recently-appointed General Manager of the Ventec Fullerton Southern California facility Ray Young. The pair also gave an update on current developments and future company plans."

Japan PWB Market: 2015

The downturn in business for the Japanese PWB industry can be blamed on a domino effect. The rigid circuit board segment relied heavily on business from domestic electronics companies such as Panasonic, Sony, and Sharp. Unfortunately, these electronics giants continue to lose market share and the downturn in business directly impacts the PWB industry.

Design for Profitability: Avoiding Fabrication Issues and Minimizing Costly Revisions

At last, PCB designers are finally realizing the power they wield: They have the power to design profit into the board, or, conversely, increase costs and remove profit from the PCB. Mark Thompson reviews the challenges fabricators routinely face and presents typical DFP solutions affecting the bottom line.

What is DFM, Really?

Mark Thompson relates, "The term "design for manufacturability" has been used for many years now, but does everyone really understand this concept? For instance, do you design for 10%? Do you design for a specific manufacturer's capabilities, therefore making you less likely to seek alternative fabricators? How are your drawings worded?"

Electrical Testing of Passive Components

This paper, from a group of authors from Gardien Services, discusses the new processes required by electrical test centers and labs and how the ET arena has adapted to provide accurate testing of buried resistors and accommodate the buried capacitive cores to not receive false errors from the grid testers and flying probes.

Basic Principles of Polymer Thick Film Flexible Circuits

Polymer thick film circuits are similar to their rigid and flexible counterparts; however, because of the materials and processes, they have their own very specific design rules. Because most PTF processing is most commonly based on screen printing technology, the limits of design are intrinsically linked to the printed ink's processing considerations and limitations.

Printed Electronics in Perspective

A significant amount of press coverage has been given to printed electronics over the last several years. What appears to have precipitated the explosion of interest in the middle of the last decade was a report that suggested PE would dominate electronic production by the mid-2020s with an annual market of over $300 billion. Joe Fjelstad takes a closer look.

Sustainability: What and Why?

Joe Fjelstad writes, "The resources of our planet are limited and thus are diminishing as we continue to unleash and ramp-up a seemingly never-ending flow of products to both serve and amuse us with output of the global electronics industry likely to be nearing the top of the list of 'offenders.' In that regard, we are becoming victims of our own success, to one degree or another."

Aluminum Base Circuit Technology: Structures and Manufacturing Methods

Aluminum is an attractive material for use in the manufacturing of electronic assemblies due to its low cost, good thermal properties, and stability. But due to its innate thermal spreading ability, it's not easily used when solder is required to make interconnections to components. This article describes ways to manufacture electronic assemblies using aluminum as a base and eschewing the use of solder.

Lead-free Reflow for High-layer-count PCBs

One of the most difficult printed circuit boards to adapt to Pb-free assembly processes is the high-layer count multilayer. Often, these multilayers have through-hole and hand-soldered components, and requirements for two or more rework cycles. One solution to this problem is to redesign the multilayer using current design rules and newer innovative fabrication technologies.

Graphite-based Direct Metallization for Fabrication of Complex Interconnect Designs

According to author Michael Carano, colloidal graphite direct metallization processes have proven their usefulness as a replacement for electroless copper. Continuous improvements in the stability of the graphite dispersion has made the process an enabler for flex and HDI interconnect designs.

Three Industry Giants From WKK Gather Around for Discussion

During the recent HKPCA show we sat down with Hamed El-Abd, Lionel Fullwood, and Gene Weiner. Our discussion covered an array of topics, from politics to new PCB factories and what it takes to stay competitive in today's market.

Mentor: PCB Technology Leadership Award Winners

Continuing its tradition of promoting and recognizing PCB design excellence, Mentor has announced the winners of its 25th annual PCB Technology Leadership Awards. Started in 1988, this program is the longest running competition of its kind in the EDA industry. It recognizes engineers and designers who use innovative methods and design tools to address today's complex PCB systems design challenges and produce industry-leading products.

A Conversation with Gaby Waisman, Orbotech, Ltd.

During the recent HKPCA and IPC Show, held in Shenzhen, China, I sat down with Gabby Waisman, President, Orbotech Pacific. We discussed the exciting electronics market in Asia, the market for Laser Direct Imaging (LDI), AOI and AOR among other things.

A Conversation with Canice Chung, TTM Technologies

We had the opportunity to sit down with Canice Chung, Executive Vice President of TTM Technologies, Inc. to discuss the current trends and challenges of PCB Manufacturing in China.

A Conversation with Laurent Nicolet, Schmid Group

During the HKPCA & IPC Show 2014, Laurent Nicolet, VP - PCB Business Unit of Schmid Group took a few minutes to discuss the automation technology that was on display and share the changes he's seen in the China market.

Thin PCBs for Smart Phones: Technology and Reliability Considerations

The next generation of smartphones will demand very thin multilayer boards to reduce product thickness. This paper shows three different manufacturing approaches which can be used for very thin, any-layer build-ups. The technological approaches are compared on reliability level--the any-layer copper filled microvia technology which is to be considered state-of-the-art for high-end phones and the ALIVH-C/G technology well established in Japan.

ASC Making All the Right Moves

"American Standard Circuits is always on the move and making improvements: From hiring the right people to buying the right equipment to investing in the right technologies. This company is one of the few investing in R&D. It is willing to work with customers on new products and technologies and will take on board projects no other company has successfully built," comments Columnist Dan Beaulieu.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in