Latest Articles

Bob Neves Receives Award, Talks Bergman Tribute

Barry Matties sat down with Bob Neves, one of the first recipients of the Dieter Bergman IPC Fellowship award, to talk about the tribute held for Dieter on Wednesday night of IPC APEX EXPO 2015, and some of the reasons behind the newly created award.

EPTAC Expansion Includes CID Curriculum

Leo Lambert, vice president and technical director of EPTAC, discusses EPTAC's latest expansion, which includes IPC's certified interconnect designer (CID) curriculum.

Ventec's Commitment to FOD Elimination Sets the Trend

The European Space agency has led the drive for ultra-clean laminates and pre-pregs, completely free from foreign object debris. Ventec were one of the first to respond to ESA’s call for the laminate industry to support Appendix A to IPC-4101D, which the committee has agreed will be adopted. Mark Goodwin fills in the background.

How 3D Printing Will Impact PCB Fabrication

In the near future, we will enter an era where electronic devices are printed, rather than assembled. They will be fabricated layer-by-layer as a single object, rather than assembled from separate mechanical, electrical, and optical parts. This article finds out the implications 3D printing will have on PCB manufacturing.

Cadence’s Brad Griffin Digs Deep Into DDR

During DesignCon 2015, our roving reporter, Kelly Dack, stopped by to visit with Brad Griffen in the Cadence booth. What follows is their very interesting conversation that revolves around the evolution of DDR.

2015 EIPC Winter Conference, Munich: Day 1 Review

Ninety delegates, eleven countries represented and a thought-provoking two-day programme on themes of reliability in PCB fabrication and assembly, copper cleaning and advanced material solutions, advanced imaging and soldermask, and how to make PCBs smart and ready for Industry 4.0. Add the further attractions of a keynote by Walt Custer and the chance to visit a military aircraft assembly plant: the formula for another highly successful EIPC Conference, this time close to Munich Airport.

It's Only Common Sense: Looking Good!

You should be constantly thinking how your company presents itself to the outside world: what it looks like when you walk through it, what it sounds like when customers call in. Does your company appear to be a well-run lucrative company or does it look like a company on its last legs, ready to go out of business?

California Congressman Mike Honda Discusses American Manufacturing

Barry Matties, Publisher of I-Connect007, sat down with Congressman Honda, who represents District 17 in the Silicon Valley, and talked with him about American manufacturing, infrastructure, education and some of the current thinking in America. According to Honda, "The policies we pass and the things we do in D.C. that negatively impact our economy...a lot of those guys who don’t support some of the positive things we want to see happen don’t really understand that it impacts their districts, their social services, health and business."

OSP and Selective Electroless Nickel for Mixed-Metal Finish PWBs and BGA Substrates

The documentation relating to the requirements for alternative surface finishes have been well publicized at many industry forums. Pressure to eliminate lead in electronics assemblies is forcing fabricators and OEMs to reevaluate their surface finish and joint attachment procedures.

A Conversation with Andy Michniewicz

Gul Technologies (Gultech) is not your traditional offshore supplier. It is a true industry leader when it comes to technology. A few months ago, I sat down to talk with Mayne-McKenney’s Andy Michniewicz. His company represents Gultech here in North America and they were just starting a project to expand Gultech’s market reach on this side of the globe. I found that interview interesting enough that I wanted to follow up and see how things were going now that a few months have passed.

Optomec Partners with Ceradrop MGI Group

“Ceradrop has both leading-edge technology and global expertise in printed electronics and smart 3D printing, which make it an ideal partner for Optomec,” said Mike Kardos, Director of International Sales at Optomec. “We are looking forward to working with Ceradrop to expand our European marketing network for Aerosol Jet.”

N.A. PCB Business Growth Flat in 2014

"PCB business in North America was virtually flat in 2014 compared to the previous year," said IPC's Sharon Starr. "Sales ended the year less than one percentage point below 2013, while orders finished the year just 0.6% above 2013. Strong orders in the fourth quarter have kept the book-to-bill ratio solidly in positive territory, which bodes well for sales growth in 2015."

MacDermid's Cullen Reflects on 20 Years in China

Recently, while in Shenzhen, China, Barry Matties had the chance to catch up with Don Cullen, the global marketing director at MacDermid Electronics Solutions. They sat down to discuss the many changes he's seen in China since his first visit there nearly 20 years ago, and the country's future.

Ventec USA Expands Sales Force

Ventec USA, a member of the Ventec International Group, leading manufacturer of high quality, high performance copper clad laminates and prepregs, is delighted to announce the appointment of two sales professionals to further augment its presence in the North American market.

A Cautionary Tale: Counterfeit Materials

John Ling of EIPC writes, "Risk from counterfeits wears many hats. There is reputational risk, which can be damaging; there is inherent safety risk, which could be fatal; and there is financial risk to the OEM, the PCB manufacturer, and the PCB broker. One way of minimising risk is by dealing direct."

Polar Takes on China's Test Equipment Counterfeiters

Recently, while in China, Barry Matties spoke with Jonson Jiang, country manager of Polar Instruments. They discussed the company's latest impedance test equipment offerings and the challenges Polar faces in China, including companies that create counterfeits of their testing equipment. Can legitimate companies rely on China's government to fight counterfeiting?

Prototron Circuits to Exhibit at SMTA Rocky Mountain Expo

Dave Ryder, President of Prototron Circuits of Redmond Washington and Tucson Arizona announced recently that his company will be exhibiting at this year’s SMTA Rocky Mountain Expo and Technical Conference 2015 to be held on Wednesday, January 28th at the Champions Club &Sports Authority Field at Mile High Stadium in Denver Colorado.

2015 Outlook for the PCB Industry: A Global Perspective

The total value of global electronics production (excluding components) in 2013 was estimated at $1.5 trillion and the value of worldwide PCB production at $58 billion. In 2013 Asia (including Japan) accounted for 58% of worldwide electronics production, while Japan accounted for less than 5%, Europe (EU28) accounted for 15% and North America (U.S. and Canada) for 16.5%.

DSG Invests in ALTIX's New LED Exposure Machine

Giovanni Tridenti, president and CEO of DSG, and Sylvain Dromaint, sales and marketing director at ALTIX, join Guest Editor Bob Neves to discuss the partnership between their companies in the LED exposure machine market.

ASC Making All the Right Moves

"American Standard Circuits is always on the move and making improvements: From hiring the right people to buying the right equipment to investing in the right technologies. This company is one of the few investing in R&D. It is willing to work with customers on new products and technologies and will take on board projects no other company has successfully built," comments Columnist Dan Beaulieu.

Disrupting PCB Imaging with Inkjet Technology: Challenges & Opportunities Explained

Why are 95% of the circuit boards driving digital devices still imaged with film, the same way they have been for the past 50 years? This paper from Henk-Jan Zwiers of Mutracx will address this question by exploring the challenges of digital PCB imaging and the emergence of inkjet imaging, a technology that has the potential to revolutionise the industry.

Why Companies Fail at Social Media and What to Do About It

Sales executives should embrace social media more than anyone in a company, but this usually isn't the case. Done well, social media is a means of communicating a company's story to a wide network of people, raising awareness and credibility amongst prospective customers, and solidifying the company as a viable option for when a prospect needs the company’s product or service.

Modern Marketing Strategies with Omni PCB

Tara Dunn, president of Omni PCB, joins Guest Editor Judy Warner to discuss her company's marketing strategy to increase customer interaction through "Coffee Talks," a quick, fast resource where she sits down with industry experts to talk about materials selection, surface finishes, new materials, rigid-flex design, and much more.

UL and Standards: Faster, Less Expensive

Doug Sober, IPC Hall of Fame member and standards engineer at Shengyi Technology, the largest copper-clad laminate maker in the world, joins Guest Editor Dan Feinberg to discuss time-to-market and the concerns over the cost of listing a copper-clad laminate and what the IPC's UL Task Group is doing to address these issues.

Dick Crowe Hands Reins to New Burkle CEO

Chairman Dick Crowe and President Helfried Weinzerl of Burkle join Guest Editor Dan Feinberg to discuss Crowe's "retirement" after 30 years in the industry and Weinzerl's move from the capital equipment industry to PCB electronics. Crowe is confident in the transition and excited for the future of the company.
Subscribe | Magazines | RealTime with | JobConnect007 | Education | Webinars
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in