-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueInner Layer Precision & Yields
In this issue, we examine the critical nature of building precisions into your inner layers and assessing their pass/fail status as early as possible. Whether it’s using automation to cut down on handling issues, identifying defects earlier, or replacing an old line...
Engineering Economics
The real cost to manufacture a PCB encompasses everything that goes into making the product: the materials and other value-added supplies, machine and personnel costs, and most importantly, your quality. A hard look at real costs seems wholly appropriate.
Alternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
What Will Happen to the DOL Final Overtime Rule With the New Administration?
December 19, 2016 | IPCEstimated reading time: 2 minutes
IPC continues to address issues with the Department of Labor (DOL) final overtime rule on its own and by working with the Partnership to Protect Workplace Opportunity—the coalition of companies and associations from many different industries. IPC’s significant concerns with the final rule are that it neglects to consider regional pay differences, wage compression on other exempt classifications, and a modern work environment in which many employees prioritize flexible work schedules. Recently, there have been some new developments that IPC would like to share with its membership.
As IPC recently reported, the DOL final overtime rule was blocked by District Judge Amos Mazzant’s preliminary injunction (PI). Since then, the Federal Government filed an appeal and requested a motion for expedited consideration, which was granted. Given all of this, the briefs will last until January 31, 2017. Oral arguments will then follow as will a decision. However, this part will take place under the new Trump Administration and it will have to decide if it wants to continue the appeal.
At this time, there is no sign as to whether the Trump Administration will do this or pursue another regulation, but Secretary of Labor nominee Andrew Puzder has spoken out strongly against the Obama Administration overtime regulation. This will be one of the first items with which it will have to deal. If the Trump Administration decides not to continue with the appeal, it is possible that another party could. The most likely case is the American Federation of Labor and Congress of Industrial Organizations (AFL-CIO), which plans to petition to intervene in the case at the District Court level. If granted by the judge, the PI and arguments would remain, but the AFL-CIO could continue with the appeal and it would continue to a final resolution. However, if no other party is granted intervenor status, and the government declines to pursue the appeal, then the injunction would stand and the regulation would remain blocked. If the regulation is permanently enjoined, then the next question faced by the new administration would be whether to pursue a revised overtime regulation.
IPC is sending a letter to Labor Secretary-Designee, Andrew Puzder. The letter outlines IPC’s concerns with the DOL final overtime rule and urges that the rule be overturned or, at a minimum, modified. Stay tuned for additional updates on this issue as it progresses. However, any new changes in the status of the DOL final overtime rule will take at least until February, but quite possibly a bit later.
Suggested Items
IPC Announces New Training Course: PCB Design for Manufacturability
01/10/2025 | IPCThis three-week online program, taught by an industry expert with over 40 years of experience, is designed to equip PCB designers with the knowledge and skills to reduce or eliminate design, documentation, and capability issues that often arise during PCB fabrication.
TRI Launches 3D AXI Platform with Clearer Imaging
01/10/2025 | TRITest Research, Inc. (TRI), the leading provider of Test and Inspection solutions for the electronics manufacturing industry, proudly announces the launch of the 3D AXI TR7600FB SII system, designed to deliver clearer imaging.
Focus on electronica: Future Challenges From a Designer’s Viewpoint
01/09/2025 | I-Connect007 Editorial TeamThomas Romont is CEO of WorldWide Electronic Circuits in Nantes, France, and chair of the IPC Designers Council France. He gave a presentation at electronica titled Challenges for the Future From a PCB/PCBA Designer Perspective. We asked Thomas to share his thoughts about the class, why this topic is so important, and what he hoped attendees would take away from his class.
Marcy LaRont Named I-Connect007 Executive Director
01/08/2025 | IPCMarcy LaRont, a printed circuit board (PCB) industry veteran who has been working as the managing editor for PCB007 Magazine this past year, has been named executive director of the I-Connect007 group of publications, which was purchased by IPC in 2022.
The Government Circuit: How IPC Drove Industry Progress Through Public Policy Advocacy in 2024
01/07/2025 | Chris Mitchell -- Column: The Government CircuitIn 2024, IPC Government Relations continued to shift the narrative about electronics manufacturing in the halls of government, overcoming decades of policymaker indifference in Washington and Brussels. In Asia, where several governments have taken significant strides to foster their domestic electronics ecosystems, IPC broadened its government relations efforts.