-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Resins: Five Essentials to Achieve the Right Cure
December 19, 2016 | Alistair Little, ElectrolubeEstimated reading time: 1 minute
Last month, I looked at some of the critical things you need to consider before selecting your resin, which covered hardness, colour, viscosity and cure time. I do hope readers found this simple back-to-basics guide a useful starting point for further study and consultation. Of course, when it comes to the choice and application of resins, there’s a lot of information to take in, and over the following months I hope to distill this and provide some useful tips and design advice that will help you in your quest for reliable circuit protection.
Right, you’ve now chosen your two-part resin and it’s time to mix the components and get to work, so this month I’m going to turn my attention to the all-important job of mixing the resin (Part A, to use the terminology) and hardener (Part B), taking care that you get the ratio right and that you are conducting this critical part of the procedure under the right atmospheric conditions, and with all due regard for safety procedures. Get the mix wrong at this early stage and you will not achieve a satisfactory cure, which will ultimately lead to all sorts of problems later for the product you are potting or encapsulating. Anyway, continuing the five-point guide format that I introduced last month, here are five things to make yourself aware of before you start mixing.
Mix Ratio
Quite possibly the most critical aspect of resin mixing, which will have long term adverse repercussions if you get it wrong! There are two methods of mixing a resin with its associated hardener: by hand or using specialist dispensing equipment. If mixing by hand, then the ratio of the weight of the two components is the more useful method to employ. If mixing using dispensing equipment, then the volume ratio is used.
If the job is relatively small, then you are likely to use a resin pack, which provides the resin and hardener in precise quantities, in separate compartments of the pack. When you are ready to use the product, you simply remove the clip or other separating device between the compartments and ‘massage’ the resulting pouch, ensuring that both components are completely mixed.
To read this entire article, which appeared in the November 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Koh Young Extends Invitation to the 2024 IEEE Electronic Components and Technology Conference
04/30/2024 | Koh YoungKoh Young, the industry leader in True3D measurement-based inspection solutions, invites you to join us at the at the 2024 IEEE Electronic Components and Technology Conference from May 28-31, 2024, in Denver, Colorado at the Gaylord Rockies Resort & Convention Center.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
epoxySet Unveils UC-2210M - Urethane for Electronic Component Protection
04/29/2024 | epoxySetepoxySet introduces a new and unique, urethane potting compound. The UC-2210M was formulated to protect electronic components in high moisture and thermal environments including constant atmospheric exposure, oceanographic environments and high humidity conditions.
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Scape Technologies Introduces SCAPE CoCreator at Hannover Messe 2024
04/18/2024 | Scape TechnologiesToday's industrial robotics, 3D Vision, and AI are often confined by costs, complexity, and limited accessibility and usability. Scape Technologies is revolutionizing this field by broadening the horizons of what is possible.