SLAC Study: Light Can Switch On Topological Materials
January 6, 2017 | SLAC National Accelerator LaboratoryEstimated reading time: 2 minutes
Theoretical physicists at the Department of Energy’s SLAC National Accelerator Laboratory used computer simulations to show how special light pulses could create robust channels where electricity flows without resistance in an atomically thin semiconductor.
If this approach is confirmed by experiments, it could open the door to a new way of creating and controlling this desirable property in a wider range of materials than is possible today.
Over the past decade, understanding how to create this exotic type of material – known as “topologically protected” because its surface states are impervious to minor distortions – has been a hot research topic in materials science. The best-known examples are topological insulators, which conduct electricity with no resistance in confined channels along their edges or surfaces, but not through their interiors.
SLAC and Stanford University researchers have been at the forefront of discovering such materials and investigating their properties, which could have future applications in microelectronic circuits and devices. This year’s Nobel Prize in Physics was awarded to three scientists who first suggested the possibility of topologically protected material properties.
Previous theoretical studies had looked at how light might induce topologically protected phenomena in graphene, a sheet of pure carbon just one atom thick. Unfortunately, it would take an impractically high light energy and intensity to induce that effect in graphene. In this study, SLAC researchers focused on tungsten disulfide and related compounds, which form sheets just one molecule thick and are intrinsically semiconducting.
The researchers simulated experiments in which pulses of circularly polarized light, in the red to near-infrared wavelength range, hit a single layer of tungsten disulfide. The results showed that during the time the material was illuminated, its electrons organized themselves in a manner fundamentally different from graphene, creating new paths with absolutely no electrical resistance along the sample’s edges.
To account for the fluctuating interactions between light waves and electrons, the researchers employed a periodically time-varying frame of reference that had roots dating back to the 1880s and French mathematician Gaston Floquet. The approach clearly showed that lower-energy light, to which the material would seem transparent, would create topologically protected, no-resistance edge paths in the tungsten disulfide monolayer.
Moreover, the simulation showed that unwanted heating of the material that would disrupt the paths could be avoided by tuning the light energy to be slightly less than the most-efficient "resonant" energy.
“We are the first to connect first-principles material models with light-induced topologically protected states while mitigating excess material heating,” said Martin Claassen, a Stanford graduate student working at SLAC and lead author of the technical paper.
The researchers are in discussions with other research groups that could lead to experiments that test their theoretical predictions in real materials.
Suggested Items
SEMICON Europa 2024 Call for Abstracts Opens
05/21/2024 | SEMISEMI Europe announced the opening of the Call for Abstracts for SEMICON Europa 2024, to be held November 12-15 at Messe München in Munich, Germany. Selected speakers will share their expertise at the Advanced Packaging Conference (APC), Fab Management Forum (FMF), MEMS & Imaging Sensors Summit and during presentations on the show floor.
Material Insight: The Dielectric Constant of PCB Materials
05/17/2024 | Dr. Preeya Kuray -- Column: Material InsightIn the world of PCB design, miniaturization can be achieved by using low dielectric constant (Dk) materials. Low Dk materials can allow for a reduction in thickness while maintaining a given trace width, leading to lower transmission loss and higher density circuitry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
The Shaughnessy Report: Unlock Your High-speed Material Constraints
05/15/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportThe world of PCB materials used to be a fairly simple one. It was divided into two groups: the “traditional” laminates, often called FR-4, and the high-speed laminates developed especially for high-speed PCBs. These were two worlds that usually didn’t collide. But then traditional laminates started getting better, and high-speed designers and design engineers took notice and started to reconsider what FR-4 could be used for.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.