-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Designers Council San Diego Chapter Meeting: Flex Focus Fills the House
February 1, 2017 | Judy Warner, I-Connect007Estimated reading time: 6 minutes
I recently attended the January meeting of the San Diego chapter of the IPC Designers Council. The meeting was hosted by the PCB design bureau San Diego PCB, and featured guest speaker John Stine, VP of Operations for Summit Interconnect, Anaheim.
Stine’s presentation focused on flex and rigid-flex DFM, and he offered a variety of helpful design tips to the full house of 30-40 designers in attendance. Stine encouraged designers to always keep in mind the common pitfalls of flex design that arise out of dealing with these types of malleable circuits.
Prior to the talk, San Diego PCB founder Mike Creeden encouraged designers to take advantage of the upcoming CID and CID+ courses that will be offered during IPC APEX EXPO in February. Creeden, a veteran IPC-certified trainer and Designer Council Executive Board member, has opened the doors of the facility as a training location during IPC APEX EXPO. San Diego PCB recently merged with the EMS company Milwaukee Electronics.
After the meeting concluded, I had the chance to interview San Diego Chapter President Bob Griffith and discuss the chapter’s history.
Judy Warner: Bob, will you tell us about the San Diego IPC Designers council and how you got involved and eventually became president?
Bob Griffith: Our official name is San Diego IPC Designer’s Council, or SDDC for short. I had been a member of SDDC off and on over the early years of the chapter, mainly to get my book discount from IPC back then. In 2004, I left San Diego to work for Intel and after three years I got homesick and returned to San Diego.
After my return, I got involved with SDDC, but it was different this time. The president was an old friend of mine, Leslie Gomez, who had saved my rear once on a design back in my distant past. Leslie and I started helping each other again with designs, and after I got my CID+ Leslie talked me into running for president. She had been the president for over eight years and was ready pass the gavel. I have held the office since October 2008. Leslie has remained with the board as Past President ever since.
The San Diego IPC Designer’s Council has been around for a while now, and we have had a lot of members come and go over the time. But, the chapter has held its own and I’m happy to say it is doing well. Back when IPC started the Designers Certification program, SDDC members came out in force to be the first ones certified and the chapter grew quickly. For the past few years, however, attendance has subsided, but attendance has remained steady. We set a calendar for the year and the current board of directors are the ones who make it all happen by providing topics that designers want to hear about and enable them to succeed in their jobs.
Warner: How often and where do you hold meetings?
Griffith: We hold a meeting about five or six times a year. We try to have one every other month or two until October and then we start again in late January. Our biggest meeting is always in May during the Del Mar Electronics Show, when we hold a two-hour symposium on opening day.
Page 1 of 2
Suggested Items
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
North American EMS Industry Down 4% in March
04/29/2024 | IPCIPC announced the March 2024 findings from its North American Electronics Manufacturing Services (EMS) Statistical Program. The book-to-bill ratio stands at 1.31.
Real Time with… IPC APEX EXPO 2024: A Global Presence in PCB Manufacturing
04/29/2024 | Real Time with...IPC APEX EXPORob DiGiovanni, VP of sales for the Americas at STARTEAM Global, discusses the company's global presence in PCB manufacturing. As he explains, the firm operates facilities across Europe, Asia, and North America, specializing in serving contract manufacturers in the automotive and medical industries. They emphasize quality and meeting OEM standards, focusing on offshore supply and non-Chinese factories in the North American market. The company has grown through acquisitions and rebranding to offer multiple products.