A Simpler Path
January 29, 2018 | A*STAREstimated reading time: 2 minutes
A core element of circuits handling optical signals can now be made smaller and simpler, and with functionality over a wider range of wavelengths, because of a mathematical model developed by A*STAR researchers. The new design methodology is expected to have widespread use in photonic integrated circuits and contribute to more compact photonic devices.
Optical signals, such as those transmitted over optical fiber, require photonic elements and circuits to be useful. One of the most important photonic functions is ‘coupling’, which allows the signal to be split into two different paths or used to drive other dependent circuits. Coupling, however, is generally only reliable over a narrow band of wavelengths, demanding a complicated design and fabrication process and bulkier circuits.
To overcome this obstacle to photonic circuit miniaturization, Jun Rong Ong and colleagues from the A*STAR Institute of High Performance Computing, in collaboration with researchers from the Singapore University of Technology and Design, went back to the drawing board to find a simpler approach to designing these critical coupling elements for broadband operation.
“Couplers are the basic building blocks of photonic circuits,” explains Ong. “However, it has been very difficult to try to make them compact, with low power loss and broadband operability, using standard processes.”
A coupler works by running a second optical path, known as a waveguide, alongside the signal path. The optical signal induces a secondary signal in the adjacent waveguide, passing with it some of the signal’s energy. However, the ratio of power splitting changes depending on the wavelength of the signal, so a broadband coupler that provides reliable performance over a wide range of useful wavelengths is something of a holy grail for photonics engineers.
“We distilled the key ingredient that makes a directional coupler a broadband splitter – a combination of straight and bent waveguides – and thoroughly explored and exploited it,” says Ong.
Ong’s team came up with a design methodology based on a mathematical ‘transfer matrix method’ to determine the coupler section lengths, radii, and waveguide cross-sections that would give the desired operation with low wavelength sensitivity. Using this approach, the team designed and fabricated a 50/50 power splitter with a wide bandwidth and length of just 20 micrometers.
“We were able to improve the broadband performance of the photonic power splitter through a simple modification of existing designs, and have achieved a balanced 50/50 output which is difficult by other designs,” Ong says.
Suggested Items
Würth Elektronik in United States Embarks on New Milestone with State-of-the-Art Headquarters
05/17/2024 | Wurth ElektronikWürth Elektronik in the United States, a leading manufacturer of electronic and electromechanical components as well as custom magnetics, has announced the commencement of construction on a new 70,000-square-foot headquarters. This new facility underscores the company’s commitment to innovation and grow in the electronics industry.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
Airbus Achieves Eurodrone’s Preliminary Design Review
05/16/2024 | AirbusThe Eurodrone programme has successfully performed the Preliminary Design Review (PDR). Led by Airbus Defence and Space as prime contractor, this major programme milestone has been completed with OCCAR and representatives of the four customer nations (France, Germany, Italy and Spain) in the presence of the three Major Sub-Contractors (MSC), Airbus Defence and Space Spain, Dassault Aviation and Leonardo.
A Review of the 2024 Del Mar Electronics and Manufacturing Show
05/16/2024 | Barry Matties, I-Connect007The Del Mar Electronics and Manufacturing Show (DMEMS) in Del Mar, California, recently took place at an unlikely venue: the Del Mar Fairgrounds. Doug Bodenstab, founder and show organizer, says the show covers everything in electronics manufacturing: design tools, components, base materials, training, testing, board fabrication, AI, data analytics, and more. While you can find about anything online these days, Bodenstab adds that there is no substitute for meeting people in person.
TactoTek Licenses IMSE Technology to Polestar for Sustainable Electronics Design Innovation
05/15/2024 | TactoTekPolestar, the Swedish electric performance car brand, and Finnish smart surface pioneer TactoTek, have entered a collaboration to explore integration of Injection Molded Structural Electronics (IMSE) technology into Polestar’s vehicle programs.