Out of Thin Air
March 28, 2018 | Argonne National LaboratoryEstimated reading time: 3 minutes
The lithium-ion battery has transformed the portable electronics industry and is making inroads into energy storage on the electric grid and electrically powered transportation. Today, research laboratories around the world are seeking to develop beyond-lithium-ion batteries that are even more powerful, cheaper, safer and longer lived.
Image caption: This schematic of the new Li-air cell design consists of coated lithium anode, molybdenum disulfide cathode and a unique hybrid electrolyte. The different materials were subjects of basic science computational studies. (Image by Argonne National Laboratory and the University of Illinois at Chicago.)
As reported in the journal Nature, a team of scientists from the University of Illinois at Chicago and the U.S. Department of Energy’s (DOE) Argonne National Laboratory has produced a new design for a beyond-lithium-ion battery cell that operates by running on air (hence, referred to as “lithium-air”) over many charge and discharge cycles. Larry Curtiss, co-principal investigator and Argonne Distinguished Fellow, observed that the team’s article was appealing to Nature because “others have tried to build lithium-air battery cells that run on air, but they failed because of little cycle life.”
“This first demonstration of a true lithium-air battery is an important step toward what we call ‘beyond-lithium-ion’ batteries.” — Amin Salehi-Khojin, assistant professor, University of Illinois at Chicago.
The problem with past technology has been that battery cells tested in the lab required a separate supply of pure oxygen (hence, referred to as lithium-oxygen batteries). As a consequence, a tank of oxygen gas would have to be part of the battery system, making it prohibitive for use in electric vehicles due to space requirements. A lithium-air battery that uses air from outside eliminates this problem.
The key features of the team’s newly developed battery cell are a new protective coating for the lithium metal anode, which prevents the anode from reacting with oxygen and hence deteriorating, and a novel electrolyte mixture that allows the cell to operate in an air atmosphere. In tests under an air environment, this cell maintained high performance during 700 cycles, far surpassing previous technology. According to Amin Salehi-Khojin, co-principal investigator and assistant professor at the University of Illinois at Chicago, “The energy storage capacity was about three times that of a lithium-ion battery, and five times should be easily possible with continued research. This first demonstration of a true lithium-air battery is an important step toward what we call beyond-lithium-ion batteries.”
The team’s basic science computational studies uncovered how this system operates in air and what factors contribute to the improved cycling stability. This new knowledge should prove crucial in scientists’ continued efforts to develop a full-size lithium-air battery.
The researchers at the University of Illinois at Chicago built, tested, analyzed and characterized the battery cells, while those at Argonne mainly handled the basic science computational studies. Important to the project’s success was the use of the Argonne Leadership Computing Facility (ALCF) and the Center for Nanoscale Materials (CNM) for high-performance computing. The ALCF and CNM are DOE Office of Science User Facilities, both located at Argonne. Equally instrumental was the Research Resources Center at the University of Illinois at Chicago.
The Nature article, to be published on March 22, is titled “Lithium-Oxygen Batteries with Long Cycle Life in a Realistic Air Atmosphere.” Other Argonne authors include Rajeev Assary, a chemist in the Materials Science division; Cong Liu, an assistant chemist in the Chemical Sciences and Engineering division; Badri Narayanan, an assistant materials scientist in the Materials Science division; and Anh Ngo, an assistant physicist in the Materials Science division.
The research was funded in part by the National Science Foundation, DOE’s Office of Science and the State of Illinois. Several of the researchers received support from the Joint Center for Energy Storage Research, a DOE Energy Innovation Hub, and the Center for Electrical Energy Storage: Tailored Interfaces, a DOE Energy Frontier Research Center, both also supported by the Department’s Office of Science.
About Argonne National Laboratory
Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation's first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America's scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy's Office of Science.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Sustainability in the Industry
04/26/2024 | Real Time with...IPC APEX EXPOGuest Editor Henry Crandall and Chris Nash of Indium Corporation discuss the company's 90th anniversary and its focus on sustainability. They focus on the benefits of sustainable materials, their compatibility, and value propositions. The conversation also highlights how Durafuse LT technology's role in reducing reflow temperatures is leading to significant cost and energy savings. Nash also touches on downstream sustainability efforts such as using recycled materials for packaging.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.