IDTechEx Research Report Explores Connected Sensors for the Prevention of Chronic Ulcers
May 10, 2018 | PRNewswireEstimated reading time: 2 minutes
As advancements in connectivity and miniaturization of electronics are made, smart sensors are beginning to find traction within the wound care pathway. IDTechEx Research has published a report titled Advanced Wound Care Technologies 2018–2028 and have previously reportedon why disruption is needed in wound care in the next 10 years. Here, IDTechEx explores a few connected devices that can contribute to the prevention of chronic wounds of pressure ulcers (PUs) and diabetic foot ulcers (DFUs).
Sensors for the Prevention of Pressure Ulcers
MedicusTek have created the Sensable Care system which relies on a connected sensor pad or sensor mattress for detection of patient positioning to prevent pressure ulcer formation. By tracking patient position over time, the Sensable Care system can determine which areas of the patient are being exposed to prolonged pressure and notify caregivers accordingly for repositioning. The system resets if the patient successfully repositions themselves, thus decreasing the burden on caregivers where possible. Moreover, caregivers can receive immediate feedback as to whether their repositioning efforts were adequate in reliving the excessive pressure.
Leaf Healthcare have taken a different approach to providing a similar solution. Their product, the Leaf Sensor, is a single-use wireless patch to be worn on the patient's chest. Sensors within this device remotely monitor the patient's position, orientation and status. The Leaf Sensor aims to provide a more effective way to prevent PUs by accurately measuring the turn frequency, angle, and reperfusion time. A history of the patient's movements can help the caregiver in ensuring an even distribution of pressure over time. Moreover, the tracking of ambulation helps caregivers determine how the patient is progressing towards their mobility goals.
Sensors for the Prevention of Diabetic Foot Ulcers
Smart socks and insoles have been developed for the prevention of DFUs. Using these devices, diabetics can take a more active role in the care of their feet, whether by modifying their behavior, or by the early detection of injuries.
Orpyx have developed the SurroSense Rx shoe insert consisting of a textile pressure sensor. Real-time monitoring of pressure levels allows for wearers to modify their walking behavior to avoid damage to their feet. This is particularly useful to those who have decreased sensation due to peripheral neuropathy.
Siren's smart socks have integrated sensors to monitor temperature changes throughout the day to detect early signs of injury. This is because inflammation, one of the early signs of injury, is accompanied by a rise in skin temperature.
Bonbouton's smart insoles also monitors the temperature changes. Their product detects temperature differences between the wearer's feet – a large temperature difference detected between the feet signals decreased blood flow in the foot with the higher temperature. This is cause for concern, as ischemia is another cause of DFUs.
Footfalls & Heartbeats are working closely with the University of Nottingham to develop smart socks that measure both pressure and blood flow in the feet via optical sensors embedded in the socks.
The prevention of PUs and DFUs using the above technologies has the potential to save patients years of poor health and the healthcare systems billions of dollars per year. The majority of PUs are entirely preventable, and these technologies should help immensely with current efforts to decrease PU incidence. Additionally, the prevention of DFUs can have significant knock-on effects, such as the prevention of lower-limb amputations – over 85% of nontraumatic lower-limb amputations are preceded by a DFU.
Suggested Items
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
The Chemical Connection: Reducing Etch System Water Usage, Part 1
04/05/2024 | Don Ball -- Column: The Chemical ConnectionWater conservation has become an important component of the overall system design for most manufacturing operations today. Changing climate conditions and increasing populations are beginning to strain the freshwater supplies in many areas of the country. As a result, as equipment suppliers, we see an increasing number of requests for options that reduce water usage in proposed wet processing systems. Etching systems tend to use more water because of the need for close temperature control to maintain steady etch rates and the rinsing requirements for complete removal of corrosive etchants from the surface of the product before the next process step. This column contains some simple suggestions for reducing water usage in etch systems that won’t strain the budget too much.
Indium’s Sze Pei Lim to Present on Semiconductor Packaging at ICEP Japan
04/02/2024 | Indium CorporationIndium Corporation’s Senior Global Product Manager for Semiconductor and Advanced Materials, Sze Pei Lim, is scheduled to present at the International Conference on Electronics Packaging (ICEP 2024).
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Indium Corporation to Showcase Proven EV Products and High-Reliability Alloys at Productronica China
02/28/2024 | Indium CorporationAs a materials pioneer and trusted partner in electric vehicle (EV) and e-Mobility manufacturing, Indium Corporation is proud to showcase its high-reliability alloys and soldering solutions at Productronica China, March 20-22, in Shanghai.