-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Mentor Preparing for Next-Gen PCB Designers
August 20, 2018 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
As Bob Dylan once sang, “The times they are a-changin'.” We’ve all seen it: A new generation of young PCB designers is (very) slowly entering the industry, and the designers we’ve known for years are retiring, or at least talking about retiring.
These millennials are going to be the future of our industry. What does this mean for the PCB design community? How do we attract more of these smart young people to the world of PCB design?
I asked Paul Musto, director of marketing for Mentor’s Board Systems Division, a Siemens business, to explain the company’s initiatives aimed at drawing more students into PCB design. We also discussed the recent movement of electrical engineers into PCB layout, the need for a clearly defined path for students seeking to become PCB designers, and some of the ways that young people are already beginning to revolutionize this mature industry.
Paul Musto: Traditionally, as we all know, most companies had functional specialists; PCB designers, electrical, mechanical, software and signal integrity engineers. Many of these companies, if they didn't have that level of skill sets, would go to service bureaus or outside contractors and would contract for those kinds of services.
I'm an EE. I graduated from Worcester Polytechnic Institute. I was hired into Data General, a minicomputer company in Massachusetts, as one of a new team of electrical engineers to layout printed circuit boards. At that point in time, they were transitioning from a traditional PCB layout process (hand and tape) to a new CAD-based flow and wanted to have electrical engineers working on their PCB layouts. They believed that, due to the complexity and high-speed nature of their boards, EEs would have a better understanding of the fundamental electrical performance of what we're designing.
Being a recent EE, I quickly realized that I didn’t want to do PCB design as a full-time profession and only lasted about two years before moving on to a PCB design software company—which I found fascinating. At this time, EDA software was a booming industry and many exciting developments were being made. I have now spent nearly 30 years in the EDA industry, but haven't designed boards since that point. There's always been this discussion that PCB design is going to shift to the EE, because the engineer has more inherent knowledge about the electrical aspects of the design, but we haven't really seen that take place.
Well, I believe this trend is changing due to market and technology dynamics that are changing things up. One is, as we all recognize, the PCB design specialist community is aging and many are retiring, leaving a shortage. Many long-established companies you visit will have PCB designers who you've known for 25 years and are now in their late 50s and 60s.
PCB design is not a skill set that has been developed and nurtured through the years. Twenty years ago, trade schools and community-based schools offered PCB design classes, and many of them referred to it as drafting, and the person a draftsman. There would be all kinds of opportunities in the industry where people could go and learn PCB design, but many of those outlets no longer exist. It's just not a trade or a skill set that's as sought after as it was back then when you had draftsmen, electronics technicians, and mechanical designers moving into the electronics space.
To read this entire interview, which appeared in the July 2018 issue of Design007 Magazine, click here.
Suggested Items
May Issue of SMT007 Magazine: Coming to Terms With AI
05/06/2024 | I-Connect007 Editorial TeamIn the May 2024 issue of SMT007 Magazine, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
IMI Welcomes New CEO
05/03/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI),The IMI Board of Directors announced, in a disclosure dated April 25, 2024, the appointment of Louis Sylvester Hughes, Chief Executive Officer (CEO).
Gstar Announced the Strategic Move: Groundbreaking of Silicon Wafer Factory Construction in Indonesia
05/03/2024 | PRNewswireRecently, Gstar held a groundbreaking ceremony for its silicon rod and silicon wafer factory, marking the beginning of the rapid construction phase.
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.