-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Should You Send Your PCB Assembler Loose Parts?
September 20, 2018 | Duane Benson, Screaming CircuitsEstimated reading time: 2 minutes
Everybody has a few loose PCB components lying around. Sometimes, it's a few chip caps left over from a hand-rework task. Sometimes, it's a tiny QFN or big old BGA. These days, every good engineer has a little box or two full of loose parts, ones that are taken from a cut strip, fiddled with, and then just never put back together.
And it's not always easy to put them back in the strip anyway, which isn't a big deal for passives and inexpensive parts, because when you need something assembled, you just buy another strip of ten for $0.29.
From time to time, PCB assemblers are asked if we can take in and assemble loose parts. While the answer differs from company to company, the response is often "maybe." PCB assemblers can sometimes assemble from loose parts, but it's never a good idea. They can be dirty, damaged or of mixed value. It takes assemblers extra labor time, which will probably be charged back to you.
Because we're using robots to assemble, we'll have to put all of those loose parts into an empty strip—which is a pain. And we're not the only ones that feel this way. Components manufacturers don't want you to store your parts loose either. They know that having the things rattle around can cause damage or contamination.
When it comes to the bigger, more expensive parts like BGAs, fine pitch ICs and QFPs, it's a serious issue. The leads on the fine pitch parts tend to bend when jumbled up. If the QFP ends up with some pins bent or the BGA has some balls drop off, you've probably lost your prototype — which just might ruin your day. So keep those expensive parts in their original packaging.
When you look at the total system cost, a new part or two probably isn’t expensive anyway. A Freescale MCIMX31LVKN5B processor in a 457 ball BGA is around $26.00 from Digi-Key. Getting a new one of those is pretty cheap compared to the risk of spending a week trying to diagnose a problem caused by a BGA ball that cracked because of poor storage.
There are some processors, FPGAs and other specialized components that can cost hundreds or even thousands of dollars each. Those parts are probably worth repair if pins are bent or balls are knocked loose, but the best bet is to keep them in their original, not extra crispy, packaging.
So, the long and short answer to "should you send your PCB assembler loose parts?" is no. If you have loose parts, you're probably best off just buying new ones. If you don't have a choice, go ahead and give your assembly house a call.
Duane Benson is the Chief Technology Champion at Screaming Circuits.
Suggested Items
Explore Superior Rework & Soldering Technology from Kurtz Ersa at EPTECH Toronto
03/07/2024 | ErsaKurtz Ersa Inc., a leading supplier of electronics production equipment, is excited to announce its participation alongside Comtree at EPTECH Toronto, scheduled to take place Wednesday, April 17, 2024 at the Sheraton Parkway Toronto North.
The Knowledge Base: Mastering the Art of Reworking Circuit Assemblies
01/31/2024 | Mike Konrad -- Column: The Knowledge BaseIn the dynamic realm of electronics manufacturing, the need for reworking circuit assemblies is an inevitable reality. Whether it's correcting defects, upgrading components, or adapting to design changes, the process of rework plays a crucial role in ensuring the functionality and reliability of electronic devices. In this column, we'll delve into the challenges, best practices, types, and reasons for reworking circuit assemblies, and shed light on the intricate world of electronic assembly modification.
Smart Factory Insights: Making Rework a Smart Business Opportunity
01/24/2024 | Michael Ford -- Column: Smart Factory InsightsRework in manufacturing can bring waste, unplanned responses to an error, or too much variation. You also have to retain specialist skills to perform the work. Since rework cannot always be completely eliminated, let’s consider how we can create a new business opportunity.
Rework: A Perspective From the Source
01/17/2024 | I-Connect007 Editorial TeamMaria Mejias and her team at Intel work on the cutting edge of rework techniques. Tasked with characterizing rework processes for Intel’s boards and packages, Maria’s work is on the vanguard. We spoke to Maria about how her team works, what it’s like to be on the cutting edge of rework, and what contract manufacturers should expect.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
01/05/2024 | Marcy LaRont, PCB007 MagazineThe Christmas and New Year’s holidays made for much-appreciated off-time in the U.S. and Europe, but there was still a lot of good industry reading for all to enjoy. From Happy Holden’s influence on our youngest and brightest to the cost of rework, policy challenges ahead for European PCB and PCBA companies, to new faces in the industry—with some bonus R2-D2 thrown in for good measure—these articles are worth a few minutes of your time. Here are my picks from this past week in industry news and feature articles.