U.S. Manufacturing PMI Dips in February
March 5, 2019 | IHS MarkitEstimated reading time: 6 minutes
February data signalled a softer, but still solid, improvement in operating conditions across the U.S. manufacturing sector. The headline PMI slipped to its lowest since August 2017 amid slower expansions in output and new orders. Notably, the increases were slower than their respective long-run trends, with growth rates dipping to 17- and 20-month lows, respectively. Meanwhile, foreign client demand continued to rise marginally. A sustained upturn in new orders led to a further rise in employment, with backlogs also increasing.
At the same time, inflationary pressures softened in February. Rates of both input price and output charge inflation eased from January, with the former edging down to an 18-month low.
The seasonally adjusted IHS Markit final U.S. Manufacturing Purchasing Managers’ Index™ (PMI™) posted 53.0 in February, down from 54.9 at the start of the year. Midway through the first quarter of 2019, manufacturing firms indicated a solid, albeit softer, improvement in the health of the sector, with the index registering its lowest for 18 months.
Production increased further in February, albeit at a slower pace. Panellists reported that the upturn stemmed from a sustained expansion in new business and efforts to clear backlogs. That said, the rise in output was modest overall, with growth the softest since September 2017 and below the long-run trend.
Similarly, new business received by manufacturers expanded at a slower rate in February. The modest upturn was the weakest since June 2017. Although panellists stated that firmer client demand drove the latest increase, some firms noted that longer lead times were pushing clients to find alternatives. Foreign client demand, however, continued to increase. Though marginal, the rise in new export orders quickened since January.
On the price front, input cost inflation eased to an 18-month low in February. The increase in purchasing prices was nevertheless sharp, reflecting higher raw material costs and tariffs. Factory gate prices rose solidly, albeit at the second-slowest rate since December 2017.
The rate of job creation was faster than the series trend in February, with firms raising their workforce numbers solidly. Pressure on capacity was exhibited by another monthly rise in backlogs of work. Although only fractional, the latest increase extends the current sequence of order book accumulation to 19 months.
A slower rise in new business reportedly led to softer growth in buying activity. Growth in pre-production inventories also eased in February as stocks of inputs were used in production.
Finally, expectations towards the one-year outlook for output remained positive in February. Panellists were buoyed by forecasts of further upturns in new business. That said, the degree of confidence slipped to the second-lowest since November 2016 (behind December 2018).
Commenting on the PMI data, Chris Williamson, chief business economist at IHS Markit said:
"The PMI indicates the US manufacturing sector is growing at its weakest rate for one and a half years, with firms reporting a marked easing in production growth in February, linked to a similar slowdown in order book growth.
“The survey exhibits a strong advance correlation with comparable official data, and suggests that factory production and orders growth rates are close to stalling mid-way through the first quarter, albeit in part representing some pay-back after a strong January. Export markets remained the principal drag on order books.
“Having seen demand grow faster than production through much of 2018, order book and output trends have come back into line in recent months, hinting at an alleviation of capacity constraints as demand cools. Backlogs of works barely rose as a result, and price pressures have likewise moderated, though tariffs were again reported to have pushed costs higher. Hiring has consequently also slowed.
“Worries regarding the impact of tariffs and trade wars, alongside wider political uncertainty, undermined business confidence, with expectations of future growth running at one of the most subdued levels seen for over two years and suggesting downside risks prevail for coming months.”
Page 1 of 2
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.