Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
Smart Design Data Is Essential for Industry 4.0 Manufacturing
May 10, 2019 | Patrick McGoff and David Wiens, Mentor, a Siemens businessEstimated reading time: 1 minute
Almost all of the conversation regarding Industry 4.0 is centered on the manufacturing floor, which is where the effect of the initiative is most felt initially. Little attention is given to the starting data for manufacturing—the data that comes from design. However, you can’t have smart manufacturing if your process begins with dumb data. As Pink Floyd said, “You can’t have your pudding if you don’t eat your meat!”
Industry 4.0 starts with smart data. Smart data means a complete dataset with intelligence embedded within it. Wikipedia defines Industry 4.0 as “a name given to the current trend of automation and data exchange in manufacturing technologies.” Data exchange is a pillar of Industry 4.0.
If the data can’t be computed, exchanged, and interpreted automatically, inputs must be interpreted by humans to determine how to process the job. Smart data allows automated processing from design for manufacturing (DFM) and design for test (DFT) to stencil generation, surface-mount technology (SMT), and test programming. It’s as simple as an if/then statement: if this condition exists, then take that action. If the system doesn’t know what this data represents, then it can’t do anything with it automatically.
Digitalization of the PCB manufacturing product model is smart data. It defines the PCB to be manufactured; and in so doing, it also defines the manufacturing processes required. The PCB design process evolves the digital product model from concept to manufacturing hand-off with a lot of multidiscipline collaboration required along the way (such as schematic/layout, ECAD/MCAD, harness/board, system/boards). Each step requires smart data to collaborate, and many checks along the way to ensure that nothing is corrupted during the collaboration process.
To read this entire article, which appeared in the April 2019 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Hon Hai Education Foundation Continues to Promote Quantum Education
07/04/2025 | FoxconnHon Hai Education Foundation has long been committed to promoting forward-looking technology education in Taiwan's high schools, and held the "High School Quantum Teacher Training Camp" in Tainan City on July 1.
Incap UK Achieves JOSCAR Zero Accreditation
07/04/2025 | IncapIncap Electronics UK has been accredited under JOSCAR Zero, a new sustainability-focused extension of the defence and aerospace sector’s supplier assurance system.
Kitron Secures Contract for Components Supporting Unmanned Aerial Systems
07/04/2025 | KitronKitron has received a contract with an estimated value between EUR 4 and 8 million for the production and supply of advanced electronic components used in unmanned aerial systems (UAS).
NOTE Receives Order Worth 132 MSEK and Expands Collaboration with Customer within Security & Defense
07/04/2025 | NOTENOTE has received an order worth SEK 132 million from one of its existing customers operating within Security & Defense. NOTE thereby strengthens its long-term collaboration with the industry-leading customer.
Delta SEA Partner Event 2025 Unites Regional Partners to Embrace a “Future Ready” Vision
07/03/2025 | Delta ElectronicsDelta Electronics (Thailand) Public Company Limited, successfully hosted its Delta SEA Partner Event 2025: Future Ready at Delta Chungli Plant 5, Taiwan on June 10 – 11 , 2025.