-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
This Month in Design007 Magazine: Design Economics With Kelly Dack
April 9, 2020 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
I recently spoke with Kelly Dack—CID, CID+, and a PCB designer and instructor who has worked in the design and manufacturing segments over the years. Thanks to his background, Kelly provides an intriguing viewpoint on cost-aware design and the philosophy of design economics in general.
Andy Shaughnessy: Kelly, you’ve written about cost and profit in PCB design. Give us a basic overview of your thoughts on design economics.
Kelly Dack: Considering cost in design is tricky because there are so many facets of cost. First, it’s expressed in product development as “time-to-market.” How much is a company losing by not having this product? It depends on priorities. I’ve always said that the first priority is meeting a performance specification and then meeting a cost specification. But in this tricky industry, if you miss either constraint—cost or performance—you may not have a product.
And rarely do I see a cost constraint on the front end of a PCB design project. In fact, I just had a conversation with an engineer regarding using a new chip and a new sensor to drive down the cost of a product, which has been on the market for years. Here’s where it gets tricky: You may not necessarily save money by using a less expensive component. Component packages can have many different form factors, and each may require different design techniques, which could offset any cost savings. A proposed new chip may require a more expensive design process, manufacturing process, materials requirement, or all three. It’s never simple. It really requires some good analysis by all of the project stakeholders.
Shaughnessy: Before you begin layout, what are some criteria that you keep in mind for cost-aware design?
Dack: The first thing is to define products by classes. What type of class does the product belong to? Is it a disposable product? Is it a product that has a dedicated use, or is it a product that needs high reliability? These are all different types of product classifications that will play into how much the product should cost.
For instance, a disposable/throwaway calculator that you buy at a dollar store would be presumed to use less costly components, higher volumes, and techniques to reduce the cost so that a profit would be realized by selling the product in volume. However, a spy satellite or a control mechanism in the cockpit of an airplane will most certainly be more costly due to its limited volume of production and it’s higher reliability requirements. The components and parts used in the product have to undergo rigorous testing, which all add cost to the individual components, and that will add cost to the overall product. Then, there are the specifications and regulations that will add to the timeline and cost.
To read this entire interview, which appeared in the April 2020 issue of Design007 Magazine, click here.
Suggested Items
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.