Elementary Mr. Watson: Running the Signal Gauntlet
The Shaughnessy Report: Winning the Signal Integrity Battle
Connect the Dots: How to Avoid Five Common Causes of Board Failure
I-Connect Editor’s Choice: Five Must-Reads for the Week
December 31, 2020 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 3 minutes
What a difference a year makes. A year ago, I was getting ready to be on the road for two weeks covering back-to-back trade shows: DesignCon and IPC APEX EXPO. Around this time last year, I was wondering if I could make that trip with just a carry-on. (I did. I may never use a big suitcase again.)
In February, the whole world stopped because of COVID-19. We were all forced to come up with new ways to do our jobs, and the professionals in the PCB industry proved to be among the most creative at adapting to a changing landscape.
I interviewed dozens of manufacturing managers and owners who basically started over—revamping workstations, building in social distancing inside small facilities where it didn’t seem possible, and sanitizing their shops every hour, on the hour. Many of these managers then donated thousands of PCBs for ventilators in the fight against COVID-19.
Call me an optimist, but I have high hopes of being airborne again in 2021, hopefully to an industry trade show such as DesignCon in April or PCB East in May, which are slated to be in-person events as of this writing. Let’s hold a good thought. A few promising vaccines have been rolled out, and things are looking up for 2021.
We always hear that the PCB industry is “mature,” full of people past their prime who don’t know how to change with the times. I think 2020 puts the lie to that idea. I’m honored to be a journalist covering such an amazing group of people.
In the words of U2, “I will begin again.” Happy New Year!
Happy Holden Discusses His Favorite Career Moment
Published December 30
We’re fortunate to have co-workers like Happy Holden, a true pioneer in HDI and manufacturing process automation. But when we asked Happy to name his favorite career moment, he didn’t dwell on technology. In this video interview, Happy fondly recalls a time when his children went fishing on David Packard’s giant ranch, and Packard cleaned the kids’ fish for them, not long after he served as deputy secretary of defense under Richard Nixon. Someone has to clean the fish!
EIPC Technical Snapshot: PCB Surface Finishes
Published December 28
Some of you have mentioned that you feel “webinarred out” after viewing online industry events for most of the past year. If that’s the case, don’t despair: Technical Editor Pete Starkey is attending many of these online events and reviewing them for our magazines. Pete’s review of this EIPC Technical Snapshot webinar on surface finishes was one of the most popular articles of this past week.
Just Ask Heidi: Is Power Integrity the Hot Discipline of the Future?
Published December 28
Our “Just Ask” series has been a popular one this year—another lucky by-product of this crazy year. (“Everyone is at home on their computer now; I bet they have some questions they’d like answered.”) I had interviewed Heidi Barnes of Keysight Technologies when she was a panelist at AltiumLive, and I knew that she’d be a great source for questions about signal and power integrity. Also, I’d never met anyone who had won NASA’s Silver Snoopy award. Here, Heidi discusses which EE disciplines might be the most in demand in the future.
Book Excerpt: The Printed Circuit Assembler’s Guide to Smart Data, Chapter 1
Published December 30
The I-Connect007 eBooks have proven to be popular, covering PCB design, fabrication, assembly, and much more. This excerpt from Chapter 1 of “The Printed Circuit Assembler’s Guide to Smart Data,” written by Sagi Reuven and Zac Elliott of Siemens Digital Industries Software, is one of the most-read articles during the week after Christmas.
Millennials and Seasoned Veterans: Your Future Lies in Both
Published December 29
This article by columnist Dan Beaulieu drew a lot of eyeballs this week. Yes, as his title says, this industry is slowly becoming a mix of young technologists and the “graybeards,” though we folks of a certain age seem to have a numerical advantage over the youngsters for the moment. But Dan makes a great point: We can learn from each other. Sure, the new grads should learn all they can from the senior people looking toward retirement. But the young people have a totally different point of view, and we’d be wrong not to listen to them.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/12/2025 | Marcy LaRont, I-Connect007We may be post-Labor Day, but it is still hot-hot-hot here in the great state of Arizona—much like our news cycles, which have continued to snap, crackle, and pop with eye-raising headlines over this past week. In broader global tech news this week, AI and tariff-type restrictions continues to dominate with NVIDIA raising its voice against U.S. lawmakers pushing chip restrictions, ASML investing in a Dutch AI start-up company to the tune of $1.5 billion, and the UAE joining the ranks of the U.S. and China in embracing “open source” with their technology in hopes of accelerating their AI position.
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Dan Feinberg on Walt Custer: Remembering an Extraordinary Business Associate and Friend
09/09/2025 | Dan Feinberg, Technology Editor, I-Connect007The passing of Walt Custer marks the end of an era for all those who knew him and were helped and impressed by his presence, both personally and professionally. Walt's life was characterized by his unwavering commitment to the industry, his profound wisdom and willingness to share it, and his infectious enthusiasm for everything he did.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/05/2025 | Andy Shaughnessy, I-Connect007It’s almost fall here in Atlanta, and that means that the temperature is finally dropping. And it quit raining! It’s been raining since March, and I’m so over it, as the social influencers say. Last night we grilled out on the deck, and it wasn’t hot, and we didn’t get rained on. Life is good. It was a busy week in the industry. In this installment of my must-reads, we say goodbye to Walt Custer, the man who made PCB data points interesting for the rest of us.
UHDI Fundamentals: UHDI Technology and Industry 4.0
09/03/2025 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology is rapidly transforming how smart systems are designed and deployed in the context of Industry 4.0. With its capacity to support highly miniaturized, high-performance, and densely packed electronics, UHDI is a critical enabler of the smart, connected, and automated industrial future. Here, I’ll explore the synergy between UHDI and Industry 4.0 technologies, highlighting applications, benefits, and future directions.