-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Cicor Exceeds Previous Year's Results, Looks Positively to the Future
August 12, 2021 | CicorEstimated reading time: 3 minutes
Cicor Group increased its sales by 7% to CHF 116.7 million in the first half-year of 2021 (1st half-year 2020: CHF 109.0 million). Operating earnings before interest and taxes (EBIT) increased markedly by 63% in the first half of 2021, reaching CHF 6.6 million (1st half-year 2020: CHF 4.1 million). Cicor achieved comparable results in the first half of 2021 as in the first half of 2019, i.e. before the start of the COVID-19 pandemic.
The ongoing shortage in the market for semiconductor devices and certain other input materials poses challenges for Cicor. Due to the long process times in semiconductor production, the situation is not expected to ease until around the end of the year. On the one hand, this slows down sales growth; on the other hand, customers place longer-term orders, which, in addition to the significant recovery of the global economy, led to the striking 51 % increase in order intake of CHF 139.8 million (1st half-year 2020: CHF 92.6 million). The book-to-bill ratio reached 1.20 (1st half-year 2020: 0.85), pointing in the direction of further growth for the Cicor Group. The order reach was 8.5 months, significantly above the previous year’s figure of around 7 months.
Cicor Group’s focus on operational excellence and structural optimization is showing results: both EBIT margin of 5.7 % (1st half-year 2020: 3.7 %) and EBITDA margin of 9.9 % (1st half-year 2020: 8.5 %) thus not only significantly exceeded the previous year’s results, they were also above the operating margins achieved before the COVID-19 pandemic in the first half of 2019.
The tripling of net profit to CHF 5.2 million or 4.4% of sales (1st half-year 2020: CHF 1.7 million, 1.5% of sales) is mainly due to the good operating results. In addition, the favorable development of the Euro against the Swiss franc in the reporting period also contributed. Free cash flow in the first half of 2021 was negative at CHF –1.8 million (1st half-year 2020: 0.7 CHF million), because inventories of preliminary products were selectively increased to secure production. The net debt/EBITDA ratio deteriorated only slightly from 0.7 to 0.8 despite the dividend payment, while the equity ratio remained unchanged at 41.9 % (31.12.2020: 41.9 %).
The successful renewal and increase of the syndicated loan of CHF 80 million continues to provide Cicor with good financing and liquidity security in the future and creates room for acquisitions through an optional additional credit facility of CHF 75 million.
Advanced Microelectronics and Substrates (AMS) Division
In the first half of 2021, the AMS Division achieved an almost unchanged sales of CHF 28.1 million (1st half-year 2020: CHF 28.0 million). The operating result at EBIT level increased by 17 % to CHF 2.9 million (1st half-year 2020: CHF 2.5 million). In addition to implemented measures for operational excellence in PCB production, the consistently excellent results of the thin-film substrate sites in Ulm (Germany) and Wangs (Switzerland) also contributed to this. The Division’s EBITDA margin thus rose again to 18.0 % (1st half-year 2020: 16.8 %) and reached pre-crisis levels.
Electronic Solutions (ES) Division
ES Division sales recovered by 9.3 % to CHF 89.1 million in the first half of 2021 (1st half-year 2020: CHF 81.5 million) despite headwinds from component shortages. EBIT more than doubled to CHF 4.6 million in the first half of 2021 (1st half-year 2020: CHF 2.2 million), even surpassing the pre-crisis level. The EBIT margin reached 5.2 % (1st half-year 2020: 2.8 %), particularly as a result of the measures implemented in Asia: the relocation of production from Singapore to Batam (Indonesia), the replacement of less profitable customers with higher--margin ones, and the streamlining of the management structure contributed to this.
Outlook for the second half of 2021
Based on the significant increase in customer demand, reflected in the very high order intake in recent months, Cicor expects sales growth to continue year-on-year, although this is likely to be slowed by the current global shortage of materials, even in the second half of the year. For the full year 2021, sales are expected to be in the range of CHF 230 million to CHF 240 million, corresponding to a high single-digit percentage growth compared to 2020. The operating profit margin at EBIT level is expected to be in the range of 5 to 6%, which should bring Cicor back close to the mid-term target of a 6 to 8% profit margin already in 2021. The outlook is based on a stable currency situation compared to the first half of 2021 and a stable COVID-19 pandemic situation.
Suggested Items
Altus Equips SSTL with Advanced Cleaning Technology for Electronics
05/07/2024 | Altus GroupAltus Group, a leading supplier of capital equipment for the electronics manufacturing industry, has announced the successful installation of an advanced PCBA cleaning system at Surrey Satellite Technology Limited (SSTL).
Summit Interconnect Acquires Royal Circuit Solutions and Affiliates
05/07/2024 | Summit Interconnect, Inc.The combination solidifies Summit’s position as one of the largest privately owned printed circuit board (PCB) manufacturers in North America with a footprint that will now encompass eight manufacturing facilities.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.