-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
A PCB Design Data Management Overview
November 15, 2021 | I-Connect007 Editorial TeamEstimated reading time: 4 minutes
In recent issues of Design007 Magazine, we’ve covered strategies for managing specific types of data. But in this issue, we’re looking into data management techniques from a company level.
The I-Connect007 Editorial Team recently spoke with three PCB designers who have quite a bit to say about PCB data management: Altium’s John Watson, and Bissell’s Dugan Karnazes and Patryk Akhurst. They discussed their data management philosophies, the need for detailed processes that fit each company, and why data management techniques must undergo continuous improvement to be effective.
Andy Shaughnessy: Dugan, would you please share your overall thoughts on data management, and we’ll go from there?
Dugan Karnazes: Coming from a consulting background, my first question, which shapes who’s managing the data, is “Who is your customer?” If you’re managing data for a contracting situation, ultimately you must give all the files back to the customer. You hope that they have standards for how they’re storing these things. The unfortunate reality that I saw is that many companies don’t. Even though they specify how they want their files back (and the good ones will give you a list of everything that makes up a complete data package), often they don’t even enforce that. Many times, four months down the road, they’ll ask for it again. So, who’s the customer? What are their requirements, and what are your own higher requirements?
When I was responsible for handing off a design to a customer, one company gave me a list of everything they wanted: “We want the PCB in this format. We want exports for the schematic libraries and a separate export for the footprint libraries.” It made it easy. When I gave it to them, they were highly surprised because no one else had ever given it to them.
I had other customers who said, “I don’t even know what an RC filter is. Why are you asking me that? I just want to come to you and get the boards.” Now I need to do it all for my standards, and I need to have a system internally for tracking that. I think that ownership of the standard needs to be set at the manager’s level, but ultimately, it’s always going to come down to the engineer and the people who are in the CAD package to make sure that the data is meeting those standards. I’m curious to see how other people handle this, because every group I’ve talked to handles it differently.
Shaughnessy: Right. John, you worked at an OEM for years; you had a lot of designers working for you. Who was responsible for all that data?
John Watson: First, it really depended on whether things were working well with the data or not working well (laughs). But, understanding your finish line and what you’re providing to that customer is vital. Let’s say your company makes Christmas cards that play music when you open them. They’re not going to be looking for the same quality of data as a DoD company. It’s a matter of understanding everyone’s role internally in your company. Who is responsible for creating the documents or that data? Who is responsible for QC-ing it? Who’s responsible for coming up behind and making sure it’s correct?
Dan Feinberg: Let’s say that there’s a gross error, something that should have been caught. Who is responsible: the company, or the individual employee who made the error?
Watson: I think it would be both because the company is responsible for putting in place the quality checks that are necessary to make sure it’s correct. If the process is not put in place and followed, then you’re doomed for failure.
Feinberg: That’s a good answer. I agree.
Watson: If you’re putting footprints on a board that have not been looked at and verified, according to a standard, and you’re using your fab house and assembly house to verify your footprints, forget it; you’re done as a company. I have worked in the medical field and the DoD as a PCB layout person. I can tell you their standards are so high that they had a set procedure and process to do things with a required endpoint, a deliverable; if you broke that SOP, you were done. That’s the level you must work at today.
Feinberg: Especially today. I agree because we see a a trend toward individuals not wanting to take responsibility.
Watson: Yes. When something happens, the first words out of anyone’s mouth are, “That’s not my fault. That wasn’t my area. That wasn’t my responsibility.”
I actually got to the point where I had my engineers signing documents, signing the schematic, signing the PCB, and releasing it. We would do a design review. We would pass a piece of paper around, and everybody who signed was saying, “Yes, I approve of this design.” We had gotten into a habit where six months down the road, if something was missed, everyone said, “No, I didn’t agree to that.” Then, you could pull that piece of paper out and say, “Well, there’s your signature.”
What happened? We need to do a postmortem and identify what happened here. Why did this occur? That’s where a lot of the solutions then happen in a company where a negative situation could become a positive for them. At least they learn a lesson through that.
To read this entire conversation, which appeared in the November 2021 issue of Design007 Magazine, click here.
Suggested Items
Gartner Survey Finds 61% of Organizations Are Evolving Their D&A Operating Model Because of AI Technologies
05/01/2024 | Gartner, Inc.Sixty-one percent of organizations are forced to evolve or rethink their data and analytics (D&A) operating model because of the impact of disruptive artificial intelligence (AI) technologies, according to a new Gartner, Inc. survey.
Real Time with… IPC APEX EXPO 2024: Operational Excellence and Smart Factory Initiatives
04/30/2024 | Real Time with...IPC APEX EXPOOperational excellence and operational efficiency are defined in this interview with Koh Young General Manager Joel Scutchfield. He touches on automation, AI, and collaboration as solutions to resource limitations. Koh Young's data-driven approach uses AI for process adjustments, data analytics, and supply chain enhancements. The discussion underscores the shift toward smart factory initiatives and the future of manufacturing, with a focus on reshoring, nearshoring, and technology utilization.
IDTechEx Report on Quantum Technology: Nano-scale Physics for Massive Market Impact
04/30/2024 | PRNewswireThe quantum technology market leverages nano-scale physics to create revolutionary new devices for computing, sensing, and communications. Across the industry, quantum technology offers a paradigm shift in performance compared with incumbent solutions.
NASA’s Optical Comms Demo Transmits Data Over 140 Million Miles
04/30/2024 | NASA JPLNASA’s Deep Space Optical Communications experiment also interfaced with the Psyche spacecraft’s communication system for the first time, transmitting engineering data to Earth.
Real Time with… IPC APEX EXPO 2024: Insight into Summit Interconnect's Success
04/30/2024 | Real Time with...IPC APEX EXPOShane Whiteside, CEO of Summit Interconnect, discusses the company's recent recognition as one of the best PCB fabricators in the industry by receiving IPC's Peter Sarmanian award. Whiteside touches on the impact of changes in the marketplace, such as the Defense Production Act and presidential determination, on their growth. Whiteside also shares the company's focus on mechanical and data automation to enhance manufacturing processes and anticipates more automation and evolution in the industry.