Summit Interconnect – Toronto Earns IPC-1791, QML as Trusted Electronics Fabricator
December 14, 2021 | Summit Interconnect, Inc.Estimated reading time: 1 minute

IPC's Validation Services Program has awarded an IPC-1791, Trusted Electronics Fabricator Requirements Qualified Manufacturers Listing (QML) to a Summit Interconnect printed circuit board (PCB) manufacturing facility located in Toronto, Ontario, Canada. This is the first non-U.S. based facility to achieve the IPC-1791 QML.
Following initial audits by IPC, the Toronto facility passed stringent Type 2 fabricator requirements, helping to optimize product quality, reliability, and consistency across the entire manufacturing operations, earning a spot-on IPC’s global network of rigorously vetted, trusted sources. The Toronto facility joins three other Summit Interconnect facilities (Orange, Anaheim, and Santa Clara, Calif.) which were awarded the IPC-1791 QML in October 2021.
Requirements for certification and QML listing to IPC-1791 includes product and quality system, supply chain risk management system (SCRM), security system including compliance to NIST SP 800-171, Export Control Laws (ITAR and EAR), and a chain of custody system (ChoC) review.
Shane Whiteside, president and CEO of Summit Interconnect commented, “Summit Toronto is the first non-U.S. based PCB manufacturer to receive IPC-1791 certification. This trusted fabricator certification augments our existing AS9100 certification, NADCAP accreditation, DD2345 Joint Certification Program status, and ITAR 126.5 compliance in Toronto. Summit is committed to secure printed circuit board manufacturing to support the increasing needs of our U.S. and allied military customers. These certifications coupled with the capabilities and capacity available in Toronto underscore our commitment to being the trusted PCB supplier of choice for military systems and platforms.”
IPC's Validation Services QPL/QML Program was developed to promote supply chain verification and recognition. It also provides auditing and qualification of electronics companies' products and identifies processes which conform to IPC standards. The IPC-1791 QML verifies security systems and recognizes companies for either trusted electronic designer, fabricator, or assembler ensuring a high level of integrity.
"IPC's Validation Services Audit Programs uniquely provide technical and in-depth assessments of products and processes in accordance with IPC standards," said Randy Cherry, IPC director of Validation Services. "We are pleased to especially recognize Summit Interconnect Toronto, Ontario on becoming members of IPC's network of trusted QML suppliers."
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Powering Progress: Summer 2025 Community Magazine Now Available
07/22/2025 | Community MagazineIn the new Summer 2025 edition of Community Magazine, members of the Global Electronics Association demonstrate what progress really looks like—through innovation on the factory floor, influence on public policy, and investment in the next generation of engineers.
TRI to Exhibit at SMTA Queretaro Expo 2025
07/16/2025 | TRITest Research, Inc. (TRI), the leading provider of test and inspection systems for the electronics manufacturing industry, is pleased to announce plans to exhibit at the SMTA Querétaro Expo 2025, scheduled to take place on July 24, 2025, at the Querétaro Centro de Congresos y Teatro Metropolitano.
Global PCB Connections: Let the Spec Fit the Board, Not Just the Brand
07/17/2025 | Jerome Larez -- Column: Global PCB ConnectionsIf you’ve ever seen an excellent PCB quote delayed, or worse, go cold because of a single line on the fab print, you’re not alone. Often, that line reads something like, “Use 370HR only,” or “IT-180A required.” These and other brand-name materials are proven performers, but unless your design needs that specific resin system (say, for RF performance, thermal reliability, or stringent CAF resistance), you may inadvertently be holding your job hostage.
IPC Hall of Fame Spotlight Series: Highlighting Lionel Fullwood
07/15/2025 | Dan Feinberg, I-Connect007Many IPC members who have contributed significantly to IPC and our industry have been awarded the IPC Raymond E. Pritchard Hall of Fame (HOF) Award. Though many early HOF members have passed away and are unknown to today’s IPC membership, their contributions still resonate. This special series on IPC Hall of Fame members provides a reminder of who was honored and why. As a bonus, for those who are still around, we get to find out what these talented individuals are up to today.
TRI Unveils New Platform for Diverse Board Sizes
07/14/2025 | TRITest Research, Inc. (TRI), the leading test and inspection systems provider for the electronics manufacturing industry, proudly introduces a new size configuration for SPI and AOI Models.