-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Designing in a Vacuum Q&A: Nick Barbin
June 7, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 3 minutes
Optimum Design Associates President Nick Barbin has worn a lot of hats in this industry, from PCB designer to EMS company owner. We asked Nick to share his thoughts on what it’s like to design in a vacuum, while offering some strategies for escaping the vacuum.
Andy Shaughnessy: How often do you design a board without knowing who is going to fabricate and/or assemble it?
Nick Barbin: As a PCB design service provider, we are generally not always privy to this information unless we ask, and at Optimum, we do ask. It’s not so much that we care about the “who” aspect; it’s more about being in alignment with the specific manufacturer’s capabilities to ensure we are providing a design that meets our customer’s objectives for cost and reliability. This is especially important in the case of fabrication shops where capabilities tend to vary dramatically and can result in the shop requesting to modify the artwork to be able to meet the specifications called out.
Shaughnessy: Why do so many designers not know who is going to manufacture their boards?
Barbin: In the case of fabrication shops, once an OEM has qualified multiple vendors to build their boards, purchasing departments will consider that part number a commodity item, since it is generally one of the highest-cost items on any given bill of materials (BOM). In some cases, the OEM allows the commodity manager (CM) to choose the fabrication vendor. Because of these dynamics, it is very difficult for designers to keep track of specific vendors. Designers should have a pretty good idea of who their CM partner is, as most OEMs have one strategic vendor they rely on. Global time differences and language barriers may also contribute to designers not knowing who’s manufacturing their boards.
Shaughnessy: What other missing information or data do you find yourself having to “design around?”
Barbin: We believe designing around missing data is a mistake with unknown consequences. If there are missing datasheets or constraints that are truly missing, all efforts must be made to acquire the data or receive a satisfactory sign-off before moving forward. I cannot think of one instance where anything else would be acceptable.
Shaughnessy: When you find yourself designing in a vacuum, what tricks have you devised as workarounds to get the job done?
Barbin: Whether we are designing in a vacuum, at Optimum, we have documented our DFM (design for manufacturing) guidelines in our Designer Handbook so each of our designers have best DFM practices at their fingertips. Additionally, each designer has a checklist of over 90 items, many of which pertain to DFM, that must be checked off as completed or considered for each design that is delivered. This is part of our ISO 9001-2015 quality control system. Lastly, each design must pass through a DFM check using the Valor NPI software from Siemens. It is Optimum’s objective to ensure each of our designers deliver data for their respective designs to the downstream manufacturers that is both comprehensive and manufacturable to each of our customer requirements.
Shaughnessy: What are some of the hidden costs, in addition to monetary, of designing in a vacuum?
Barbin: Delayed time to market certainly comes to mind. The minute a released manufacturing package cannot be manufactured as-is and needs to be modified, the project is immediately put on hold waiting for approvals or answers. This can delay the development cycle by days and weeks as it progresses through many email mailboxes.
To read this entire conversation, which appeared in the May 2022 issue of Design007 Magazine, click here.
Suggested Items
iNEMI Names Grace O'Malley CTO
05/02/2024 | iNEMIThe Board of Directors of the International Electronics Manufacturing Initiative (iNEMI) has named Grace O'Malley Chief Technical Officer (CTO).
Intel Takes Next Step Toward Building Scalable Silicon-Based Quantum Processors
05/02/2024 | BUSINESS WIRENature published an Intel research paper, “Probing single electrons across 300-mm spin qubit wafers,” demonstrating state-of-the-art uniformity, fidelity and measurement statistics of spin qubits.
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
NextFlex Convenes the Hybrid Electronics Community at Binghamton University
05/01/2024 | NextFlexBinghamton University hosted the NextFlex hybrid electronics community on April 18 for a day of expert presentations, breakout sessions on technology and manufacturing topics, and networking.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.