-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Design Competition Wrap-up
April 6, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
The IPC Design Competition took place during IPC APEX EXPO 2023, with five finalists competing—a far cry from the original 49 entries last fall. After the competition was over, we spoke with Kris Moyer, the IPC instructor who created the design used in the competition and served as a design advisor and judge for the event.
We asked Kris to give us a quick wrap-up of the competition, as well as his thoughts on this year’s design, which none of the finalists completed.
Andy Shaughnessy: Kris, would you give us a brief rundown on the design competition?
Kris Moyer: To provide a better challenge for our competitors, we added some additional levels of complexity over last year’s design. We had five finalists, three here at IPC APEX EXPO, plus the two finalists from our India branch. We ran them through the design yesterday, and we saw some very interesting designs. We came down to one clear winner, although I will say it was very close between the first and second place.
As far as complexity, this year we ended up with a multilayer rigid-flex board incorporating several more advanced complexities: sequential lamination, HDI, advanced packaging, controlled impedance, high-speed digital design, and power distribution design. Our competitors didn’t finish, but they showed a lot of excellent technique and capability.
Shaughnessy: Some said that they never worked with rigid-flex before.
Moyer: That’s right. Unlike last year, all the competitors this year were given the opportunity for a one- to two-hour individual session with me on Monday evening before the competition. I also provided a two-hour cram session where we reviewed not only the tool, but all the different features and technologies that we have to use. So, although they may never have routed rigid-flex before, I introduced them to it and some the issues they would be involved with.
Shaughnessy: Who was the winner?
Moyer: The winner was Sathishkumar Vijayakumar of Tessolve, one of our finalists from India. He did quite well in the work that he was able to complete. He showed good technique, complexity, and the broadest range of features and methodologies. Adam Thorvaldson of Innovex came in second. Adam also had a good amount of design complexity and features, so it was very close.
Kelly Dack: Kris, were these designs graded on manufacturability?
Moyer: Yes, that was one of the criteria, and we gave them some rules up front. The bulk of the design rules were provided to them already in the design because of the time limitations, but we said, “Here’s the range of via sizes you can make. You can make microvias for the BGA escape routing all the way up to larger, higher-current vias for the power distribution, etc.”
To read this entire conversation, which appeared in the March 2023 issue of Design007 Magazine, click here.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.