Global PCB Connections: A Field Engineer’s Perspective on the Top 10 Trends to Watch
Target Condition: Designing vs. Inventing
Dana on Data: The Missing AI-NPI Link
EMA Webinar: Next Generation MCAD/ECAD for SOLIDWORKS
May 9, 2024 | EMA Design AutomationEstimated reading time: 1 minute
Experiencing challenges with MCAD/ECAD collaboration? Do update and revisions take too long? Are you finding integration issues too late in the design process? Does the fidelity of the ECAD data you receive prevent you from building a full digital prototype of your design before manufacture?
If you answered yes to any of these questions you are not alone. MCAD/ECAD is a significant challenge and pinch point in the overall design process and with increasing product complexity and compressed schedules the challenge is only getting more severe. Fortunately, Cadence & Dassault have partnered to help design teams solve these problems through enhanced integration between the MCAD and ECAD design software.
Learn how the MCAD and ECAD experts at Hawk Ridge and EMA can help you solve your MCAD/ECAD integration challenges with this unique collaboration environment.
What You Will Learn:
- Common challenges in ECAD/MCAD collaboration and how to overcome them.
- How Cadence & Dassault have partnered to solve these challenges.
- Importance of native integration for MCAD design continuity
- How to effectively collaborate with ECAD on design choices and libraries
- Preview of next generation 3DX cloud connector
May 14th, 2024 @ 2:00pm ET. Register now in the events section of ema-eda.com.
Share on:
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/28/2025 | Andy Shaughnessy, I-Connect007I’ve spent my week recovering from a busy and interesting week in Anaheim for the 25th IPC APEX EXPO. I think back to my first APEX EXPO, and the changes since then are too numerous to count. I first attended in 2004, also in Anaheim, back when there was almost no design content in the conference or expo portions of the show. It was just a few years after the downturn, and attendees and exhibitors alike were skittish, almost afraid to show confidence in our industry. A few unemployed design friends handed out copies of their resumes. Travel budgets were still down, and the aisles weren’t exactly packed with traffic.
HARTING 3D-Circuits Leads 3D-MID Innovation: Transforming Consumer Electronics with Advanced Technology
03/27/2025 | PRNewswireThe consumer electronics industry is experiencing a remarkable transformation, propelled by rapid technological advancements and an increasing demand for compact, efficient, and multifunctional devices. Central to this evolution is 3D-MID (Three-Dimensional Mechatronic Integrated Devices) technology, which redefines design standards and drives innovation.
GlobalFoundries Certifies Ansys Lumerical Photonic Design Tools for GF Fotonix™ Platform
03/27/2025 | PRNewswireAnsys and GlobalFoundries collaborated to certify four Ansys photonic solvers, empowering engineers to simulate passive and active photonic components with high-fidelity in the GF Fotonix platform.
Real Time with... IPC APEX EXPO 2025: Emphasizing Sustainability in PCB Design with Summit Interconnect
03/27/2025 | Real Time with...IPC APEX EXPOAndy Shaughnessy and Gerry Partida of Summit Interconnect discuss the rising customer interest in sustainability within PCB design. Gerry points out that many designs neglect sustainability, resulting in low yields and higher costs. The conversation stresses the importance of adhering to PCB standards and collaborating with fabricators to tackle design challenges and enhance sustainability.
Real Time with... IPC APEX EXPO 2025: Transforming Engineering With Digital Solutions from Zuken
03/27/2025 | Real Time with...IPC APEX EXPOBob Potock discusses Zuken's focus on digital engineering and a move away from traditional document-based processes to model-based designs. This change improves product definition, reduces design errors, and optimizes product parameters. Bob notes that the IPC-2581 standard is crucial for connecting designs, while AI enhances design efficiency.