The Right Approach: ‘Twas the Night Before Christmas (Harley-style)
It’s Only Common Sense: Dear Santa, Here’s My Sales Wish List
The New Chapter: The Benefits of Continuing Education
Beyond Prepreg: The Glassless ‘Revolution’
June 25, 2024 | Marcy LaRont, PCB007 MagazineEstimated reading time: 2 minutes
As our industry rallies around the call to action for HDI and UHDI, we find unparalleled and myriad laminate options. This abundance is rivaled only by the question surrounding them: Can they measure up to the high technology packaging demands required in our near future? Unsurprisingly, recent developments in FR-4-esque materials for high-speed and high-density designs, as well as newer, glassless technology for replacing traditional glass-impregnated laminates and prepreg, are garnering much interest. I caught up with Alun Morgan, technology ambassador for Ventec International Group, to ask about the impending “glassless revolution” and how it’s poised to solve some of our manufacturing challenges.
Marcy LaRont: Alun, can you explain glassless epoxy filler? Is it liquid?
Alun Morgan: It's not liquid; it’s a rubber-like unreinforced dielectric material. The industry vernacular for this is bondply. It is a non-glass reinforced resin that can be delivered in two standard formats: resin-coated copper foil (RCC) or resin-coated film (RCF).
There are many ways of delivering resin into a circuit board. The standard way is to use prepreg, which is a resin-impregnated fiber, and usually a glass fabric. Another option is to screen-print the resin onto the printed circuit board material, which has been available for years. Then there is the bondply technique, which has a few specific advantages.
LaRont: We heard about this at a recent UHDI conference. Please explain bondply.
Morgan: It's a dielectric layer used in multilayer stackups where you want to build bonding in sequential layers. Imagine you have a circuit, and you want to make HDI layers on the outside with very thin dielectrics, 25–50 microns, just one or two mils. You take the board, which has copper on one side and laminate a layer of bondply onto it. In this case, that could be resin-coated copper foil. You form a pattern on the copper and laser drill through that layer to connect down to the layer beneath. You can build up layers that way, adding one layer after another. This is a standard technique for making multilayer, high density circuits, typically with microvias on the outside using such standard constructions as 2+4+2 or 2+8+2, etc. That is one area where these bondply films can be used and it is a standard method of forming thin layers.
Continue reading the rest of this interview which was originally published in the June 2024 issue of PCB007 Magazine.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
Trouble in Your Tank: Materials for PWB Fabrication—Drillability and Metallization
07/16/2024 | Michael Carano -- Column: Trouble in Your TankLaminate materials are the building blocks on which printed circuit boards are manufactured. Circuit board designers rely on the critical electrical properties of the materials to design the interconnects, and with the drive toward IoT (internet of things), autonomous driving, and virtual and augmented reality, material properties take on a very high level of importance.
Don’t Overconstrain Your Board Materials
07/02/2024 | I-Connect007 Editorial TeamWhen we started planning May’s issue, which centers on the use of traditional laminates in certain high-frequency PCBs, we knew we had to interview Kris Moyer and Ed Kelley together. Kris teaches advanced PCB design classes for IPC, and Ed is the former CTO of Isola and founder of Four Peaks Innovation. What ensued was a wide-ranging discussion on the evolution of “standard” PCB laminates and the recent trend by some OEMs to use these materials in high-frequency and even RF boards.
Traditional Materials, High-Frequency Boards?
06/18/2024 | I-Connect007 Editorial TeamNot long ago, high-frequency and RF boards required specialized laminates, which tend to be costly and difficult to manufacture. But now, high-frequency designers use traditional PCB laminates for certain high-frequency boards. How is this possible? For some insight, we asked Ed Kelley, founder of Four Peaks Innovation and former CTO of Isola, to discuss how traditional materials have improved and what this means to PCB designers and design engineers today.
KYZEN to Highlight 3D Printing Process Resin Cleaners at RAPID + TCT
06/06/2024 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at RAPID + TCT 2024, scheduled to take place June 25-27, 2024, at the Los Angeles Convention Center.