Beyond Design: The Fundamental Structure of Spectral Integrity
Elementary, Mr. Watson: High Power: When Physics Becomes Real
The Shaughnessy Report: Watt About Power Integrity?
Do You Collaborate With Your Component Supplier?
July 15, 2024 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Mention the word “collaboration” to a group of designers, and a few of them might acknowledge working closely with their fab and assembly partners. But how many designers consider their component providers to be true stakeholders in the process and collaborate with them regularly?
Duane Benson, founder of Positive Edge, has a long history of working on the component side of things. I asked Duane to weigh in with his thoughts on collaborating with component suppliers.
Andy Shaughnessy: We hear a lot of talk about the need for designers to collaborate with their fab and assembly partners, but component providers seem to be left out of the mix. Do you think component providers are also “stakeholders” in this process?
Duane Benson: Component suppliers are absolutely stakeholders in the design process. The supply chain isn't in as bad shape as it was a few years ago, but there is still too much variability to take it for granted. It's not uncommon to have easy availability for prototype quantities but limited availability for production quantities, or one package may be in good supply, but the one you want, not so much. Good supply chain partners can keep you from designing with unavailable parts, and they can help you find subs.
Shaughnessy: What does true collaboration look like between design, fab, assembly, and component provider?
Benson: In true collaboration, early BOMs are cleared with the supply chain, and are re-cleared at intervals throughout the design process—and not just for exotic parts. Sometimes passives and other common parts have issues too. Supply chain may also know about new and upcoming parts that could simplify a design. Fab and assembly should be used from the start for ground rules. Complex footprints or packages must be run past both fab and assembly for layout and manufacturing considerations.
Shaughnessy: After the supply chain snafu a few years back, it seems like a no-brainer to keep your component supplier in the loop. Do you think designers are communicating more now with the component folks?
Benson: Not really. Even during the worst of the troubles, engineers would often pick components without thought to availability. A tweak or redesign based on availability was too often a last resort and probably still is. The draw of a hot new MCU or such always seems to override the fact that more than prototype quantities are a year away.
To read this entire conversation, which appeared in the June 2024 issue of Design007 Magazine, click here.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Standex Electronics Unveils New Brand Identity to Power the Next Era of Engineering Innovation
10/23/2025 | PRNewswireStandex Electronics, a business segment of Standex International Corporation and a global leader in precision-engineered electronic components, has unveiled a refreshed brand identity that represents the next evolution of its engineering excellence.
PCBA Market Poised to Reach $147.5 Billion by 2035
10/20/2025 | Globe NewswireGlobal printed circuit board assembly market is projected to reach $147.5 billion by 2035, at a CAGR of 4.7% during the forecast period 2025-2035
Würth Elektronik Participates in EU Initiative PROACTIF for Cutting-edge Drone and Robotics Solutions
10/14/2025 | Wurth ElektronikWürth Elektronik is a partner in the visionary EU project PROACTIF, funded under the Chips Joint Undertaking (Chips JU). The international consortium of 42 partners from 13 countries aims to strengthen Europe’s technological sovereignty i
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
Sumitomo Riko Boosts Automotive Design Efficiency 10x with Ansys AI Simulation Technology
10/13/2025 | SynopsysSumitomo Riko is implementing Ansys, part of Synopsys, Inc. AI technology to accelerate time-to-solution and improve efficiency during the design and manufacturing of automotive components.