Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
Fresh PCB Concepts: PCB Plating Process Overview
UHDI Fundamentals: UHDI for RF Microwave Applications
July 16, 2024 | Anaya Vardya, American Standard CircuitsEstimated reading time: 2 minutes
Ultra high-density interconnect (UHDI) technology has significant potential for RF (radio frequency) microwave applications. Its advantages lie in its ability to provide high-density routing and integration, which are crucial for complex RF circuits. Here are three key UHDI benefits in RF microwave applications:
1. Signal Integrity
In RF applications, signal integrity is paramount. UHDI facilitates controlled impedance routing, reducing signal loss and ensuring reliable transmission of RF signals. UHDI improves signal integrity in the following ways:
- Controlled impedance routing: UHDI allows for precise control over the impedance of transmission lines, which is crucial for maintaining signal integrity in RF circuits. Controlled impedance ensures that signals propagate with minimal reflections and distortion, especially at high frequencies.
- Reduced crosstalk: UHDI enables dense routing of transmission lines while minimizing the spacing between them. This reduces the likelihood of crosstalk, where signals from adjacent traces interfere with each other, thus preserving the integrity of individual signals.
- Optimized via placement: UHDI facilitates strategic placement of vias (vertical interconnect access) to minimize signal distortion and reflections. By optimizing via placement, signal paths can be kept short and impedance transitions can be managed effectively, reducing signal degradation.
- High-frequency performance: UHDI substrates are designed to support high-frequency operation, typically with low dielectric loss and low dispersion characteristics. This ensures that RF signals can propagate efficiently without significant attenuation or distortion, maintaining signal integrity across the frequency spectrum.
- Shielding and grounding: UHDI designs can incorporate shielding layers and efficient grounding techniques to minimize electromagnetic interference (EMI) and maintain a clean RF environment. Proper shielding and grounding help prevent external noise from degrading signal quality.
- Signal integrity simulation and modeling: Advanced simulation and modeling tools are available for UHDI designs, allowing engineers to analyze signal integrity characteristics such as impedance matching, reflection coefficients, and insertion loss. These tools enable designers to optimize layouts for optimal signal integrity performance.
- Thermal management: Thermal issues can impact signal integrity in RF circuits, particularly at high power levels. UHDI designs can incorporate thermal management techniques such as thermal vias and heat sinks to dissipate heat effectively, ensuring stable performance of RF components.
- Low loss materials: UHDI substrates can utilize low-loss dielectric materials that minimize signal attenuation and phase distortion, particularly at high frequencies. This ensures that RF signals maintain their integrity as they propagate through the circuit.
To read the entire article, which originally appeared in the July 2024 Design007 Magazine, click here.
Share on:
Suggested Items
Elementary, Mr. Watson: Rules of Thumb—Guidelines vs. Principles for PCB Design
11/26/2024 | John Watson -- Column: Elementary, Mr. WatsonThe infamous "rules of thumb" are simple guidelines that help you make decisions based on experience, not exact facts. They’re like shortcuts we use because they work most of the time. For example, if you want to know if spaghetti is done cooking, a common rule of thumb is to grab a spaghetti strand and throw it against the wall to see if it sticks. I used to do that, except that instead of the wall, I used the ceiling, which drove my mother crazy.
Beyond Design: High-speed Rules of Thumb
11/21/2024 | Barry Olney -- Column: Beyond DesignThe idiom “rule of thumb” is often used in electronics design and has its origins in the practice of measuring roughly with one’s thumb. Rules of thumb are easy-to-remember, broadly accurate guides or principles based on practice rather than theory. They are used to help feed our intuition to find a quick solution based on experience. We are often forced to use rules of thumb in PCB design in the absence of expensive analysis tools. We also use them to get quick ballpark figures initially and then fine-tune the numbers with further analysis. We can use rules of thumb as a sanity check to assess whether we are using our tools correctly. In this month’s column, I will present some commonly used and helpful rules for high-speed PCB design.
Material Insight: David Griesel: Career Success Requires Tenacity, Flexibility
10/23/2024 | Dr. Preeya Kuray -- Column: Material InsightDavid Griesel, CEO of Sunrise Group, has been in the PCB industry for nearly 50 years. “I didn’t even have a desk when I started,” says David, who, as a fresh college graduate, got his start at Norplex, a company in Wisconsin that made plastic. “At that time, I had no idea what plastic was even about.” But it gave him an opportunity to learn the business from the ground up. He worked in customer service, followed by technical sales and marketing through several iterations of the company, including as Isola. I hope you’ll enjoy this interview with David as much as I did.
FIT Hon Teng Showcases AI Data Center Connectivity and Immersion-Cooled Signal Integrity Solutions at OCP Global Summit 2024
10/21/2024 | FoxconnFIT Hon Teng, a subsidiary of Hon Hai Precision Industry, will unveil its latest advancements in AI data center connectivity and immersion-cooling technologies at the upcoming 2024 OCP Global Summit.
Elementary, Mr. Watson: The Gooey Centers of Hybrid PCB Designs
10/09/2024 | John Watson -- Column: Elementary, Mr. WatsonAnyone who knows me knows that I have a special relationship with food. Taking a twist on the words of Will Rogers, "I never met a buffet I didn't like." A balanced diet, to me, means having cupcakes in both hands. One of my favorite foods is cheeseburgers. One of my colleagues at Palomar College recently invited me out for a meal, and we ended up in a burger place in San Diego. I wanted to go the conventional and safe route: a double-patty cheeseburger. My friend insisted that I try the restaurant’s special: a peanut butter cheeseburger. “Really?” I told him. “What an interesting combination.” But he insisted I try it, and since I consider myself an adventurous person, I gave it a go.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in