The Shaughnessy Report: Solving the Data Package Puzzle
Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Thermal Characterization of LEDs: Enabling the Upcoming Lighting Revolution
October 29, 2014 | Dr. John Parry, CEng., Mentor GraphicsEstimated reading time: 1 minute
According to a June 2012 report from the Climate Group, many commercially available, outdoor light-emitting diode (LED) products offer high-quality light, durability, and significant electricity savings in the range of 50 to 70%. More European cities are adopting LED streetlights because LEDs can save energy costs, while exceeding local lighting standards. They last 50,000 to 100,000 hours, change little in color, and have a failure rate of around 1%, compared, for example, to up to 10% for ceramic metal halide fixtures over a similar time period. LED streetlights are a gateway technology--when LED designers solve the current problems of reducing cost and thermal challenges, they’ll be paving the way for wider adoption and the energy-saving potential of LEDs.
Thermal management is one of the more complex areas of LED system design. And until a few years ago, the methods and technology to scientifically characterize the thermal behavior of the component, as well as its systems and subsystems, were not available. Instead, most engineers calculate their thermal needs from data sheets published by component manufacturers. Understandably, having data available to engineers on the specific thermal mechanics of LED-based devices within the system in which they are being used could be a huge step forward for future lighting designs.
This article describes a method that combines hardware measurement (a thermal transient tester), and computational fluid dynamics (CFD) software to provide high measurement throughput, which enables systems integrators to verify a vendor’s thermal resistance data during design and to test incoming commercial off-the-shelf parts before they are introduced into production. This data can be used during the design and product development phase to accurately capture the thermal response of an LED lighting system.
Read the full article here.
Editor's Note: This article originally appeared in the October 2014 issue of The PCB Design Magazine.
Share on:
Suggested Items
Innovative Technology Advancements in Test: HATS² Technology and Its Impact on Reliability Testing
05/13/2025 | Barry Matties, I-Connect007Ensuring the reliability of printed circuit boards (PCBs) has become increasingly difficult and critical, yet the development of advanced testing methodologies is essential to meeting industry demands and addressing persistent challenges. One significant innovation is the High Acceleration Thermal Shock (HATS²) test system, which transforms how reliability testing is conducted. After 40 years in the testing business at Microtek, Bob Neves is beginning a new journey with his company, Reliability Assessment Solutions Inc. (RAS).
Facing the Future: The Role of 5G and Beyond in Shaping PCB Demand
05/13/2025 | Prashant Patel -- Column: Facing the FutureInnovations that push the boundaries of connectivity shape the future of technology, processing power, and miniaturization. 5G and emerging 6G technologies are critical in transforming industries from telecommunications and healthcare to autonomous systems. This affects the printed circuit board (PCB) industry, where demand for high-performance, miniaturized, and advanced PCBs is surging. This column explores the key applications of 5G and beyond, the challenges in designing high-frequency PCBs, the effects of miniaturization, industry collaborations, and opportunities for North American companies in this space.
Accurate Circuit Engineering: Be Nimble, Quick, and Open to Change
05/12/2025 | Marcy LaRont, PCB007 MagazineJames Hofer, general manager of Accurate Circuit Engineering (ACE) in Southern California, shares his insights about his specialty, quick-turn company, the market, and the interesting times in which we find ourselves. James remains optimistic about bringing manufacturing back to the United States and takes great pride in the work that ACE does to support military, defense, and aerospace. As James looks toward a prosperous 2025, he reflects on his 40 years in the business and learning that the secret to success is not trying to be everything to everyone.
The Shaughnessy Report: Solving the Data Package Puzzle
05/12/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportIf you ask fabricators about their biggest challenges, they’ll often point at PCB designers—the readers of this magazine. Yes, you! Why is it so difficult to create the ideal data package? It’s a fairly straightforward task. But this part of the design process keeps tripping up designers, even those who started in the industry before Pink Floyd split up.
ASC Acquires Cutting-Edge High Vacuum Plugging Machine CF 200 to Expand Via Fill Capabilities
05/12/2025 | American Standard CircuitsAnaya Vardya, President and CEO of American Standard Circuits and ASC Sunstone Circuits, has announced that the company has acquired and installed a state-of-the-art ITC Intercircuit CF 200 high vacuum plugging machine at its West Chicago manufacturing facility. This latest investment further strengthens ASC’s ongoing commitment to advanced manufacturing, precision engineering, and industry-leading process automation.