Target Condition: Are Autorouters Friend or Foe?
Fresh PCB Concepts: Assembly Challenges with Micro Components and Standard Solder Mask Practices
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
ICD Releases 2015 Version of the ICD Stackup and PDN Planner
July 1, 2015 | In-Circuit Design Pty LtdEstimated reading time: 1 minute
In-Circuit Design Pty Ltd (ICD), Australia, developer of the ICD Stackup and PDN Planner software, has released the 2015 version of their popular software.
Impedance plots have been incorporated into this new release. “The impedance plots are simulated by multiple passes of the field solver (in the background) to create heads-up graphs of how to adjust the particular variables to achieve the target impedance.” said Barry Olney, CEO.
Further, with the addition of Panasonic Megtron 7 E-glass and Low Dk-glass (34MHz) the dielectric materials library has been increased to an impressive 16,700 ready-to-use materials up to 100GHz. There are also over 5,250 capacitors, derived from SPICE models, in the PDN library.
The IPC-2581B format, bi-directional interface has now been thoroughly tested by the IPC-2581 Consortium. “This new feature gives the ICD Stackup Planner the ability to import/export Cadence Allegro 16.6 and OrCAD 16.6 stackups and to import Altium Designer and Zuken CR-8000 & CR-5000 stackups” said Olney.
Existing support customers are advised to contact ICD to obtain download instructions for both the new software and the 2015 license server. Owners of a previous version may upgrade at an affordable price.
About In-Circuit Design Pty Ltd
In-Circuit Design Pty Ltd, based in Australia, developed the ICD Stackup and PDN Planner software, is a PCB Design Service Bureau and specialist in board level simulation. For further information or to download a free evaluation of the software, please go to www.icd.com.au
All trademarks are trademarks of their respective owner.
Share on:
Suggested Items
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Connect the Dots: The Future of PCB Design and Manufacturing
07/02/2025 | Matt Stevenson -- Column: Connect the DotsFor some time, I have been discussing the increasing complexity of PCBs and how designers can address the constantly evolving design requirements associated with them. My book, "The Printed Circuit Designer’s Guide to… Designing for Reality," details best practices for creating manufacturable boards in a modern production environment.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?