-
-
News
News Highlights
- Books
Featured Books
- design007 Magazine
Latest Issues
Current Issue
Power Integrity
Current power demands are increasing, especially with AI, 5G, and EV chips. This month, our experts share “watt’s up” with power integrity, from planning and layout through measurement and manufacturing.
Signal Integrity
If you don’t have signal integrity problems now, you will eventually. This month, our expert contributors share a variety of SI techniques that can help designers avoid ground bounce, crosstalk, parasitic issues, and much more.
Proper Floor Planning
Floor planning decisions can make or break performance, manufacturability, and timelines. This month’s contributors weigh in with their best practices for proper floor planning and specific strategies to get it right.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
EDA Industry Revenue Up 8.5% in Q2, But PCB Drops
September 29, 2015 | PRNewswireEstimated reading time: 3 minutes
The EDA Consortium (EDAC) Market Statistics Service (MSS) has announced that the Electronic Design Automation (EDA) industry revenue increased 8.5 percent for Q2 2015 to $1.9 billion, compared to $1.75 billion in Q2 2014. But PCB and MCM revenue dropped 13 percent compared to Q2 2014. The four-quarters moving average, which compares the most recent four quarters to the prior four quarters, also increased by 8.5 percent.
"The EDA industry continues to show solid revenue growth in the second quarter, with double digit growth in semiconductor IP and services," said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. "CAE and IC physical design also reported solid growth. Geographically, all regions except Japan saw revenue increases, especially Asia/Pacific."
Companies that were tracked employed a record 32,806 professionals in Q2 2015, an increase of 4.9 percent compared to the 31,259 people employed in Q2 2014, and up 2.1 percent compared to Q1 2015.
The complete quarterly MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available to members of the EDA Consortium.
Revenue by Product Category
The largest category, Computer Aided Engineering (CAE), generated revenue of $657.2 million in Q2 2015, which represents a 9.6 percent increase compared to Q2 2014. The four-quarters moving average for CAE decreased 0.3 percent.
IC Physical Design & Verification revenue was $379.2 million in Q2 2015, a 6 percent increase compared to Q2 2014. The four-quarters moving average increased 10 percent.
Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $155.3 million for Q2 2015 represents a decrease of 13 percent compared to Q2 2014. The four-quarters moving average for PCB & MCM decreased 3.1 percent.
Semiconductor Intellectual Property (SIP) revenue totaled $611.7 million in Q2 2015, a 15 percent increase compared to Q2 2014. The four-quarters moving average increased 22.1 percent.
Services revenue was $103.1 million in Q2 2015, an increase of 14.7 percent compared to Q2 2014. The four-quarters moving average increased 11.5 percent.
Revenue by Region
The Americas, EDA's largest region, purchased $870.3 million of EDA products and services in Q2 2015, an increase of 9.5 percent compared to Q2 2014. The four-quarters moving average for the Americas increased 11.2 percent.
Revenue in Europe, the Middle East, and Africa (EMEA) increased 5.2 percent in Q2 2015 compared to Q2 2014 on revenues of $305.4 million. The EMEA four-quarters moving average increased 0.7 percent.
Second quarter 2015 revenue from Japan decreased 3.4 percent to $182.8 million compared to Q2 2014. The four-quarters moving average for Japan decreased 10.4 percent.
The Asia/Pacific (APAC) region revenue increased to $548.1 million in Q2 2015, an increase of 13.2 percent compared to the second quarter of 2014. The four-quarters moving average increased 17.6 percent.
About the MSS Report
The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available to EDAC members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.
About the EDA Consortium
The Electronic Design Automation Consortium, EDAC, is the international association representing companies that develop and provide software tools, services, intellectual property and hardware that make it possible for hardware and software engineers to create the world's electronic products. EDAC's member companies deliver the critical technology and solutions needed to design and verify the semiconductors and associated software, packaging and interconnect technologies that enable the manufacturing of these products. Our member companies impact every conceivable segment of the electronics market, from communications, computers, networking, space technology, medical and industrial equipment to consumer electronics and the emerging IoT (Internet of Things) markets.
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Firefly Aerospace Announces Strategic Acquisition of SciTec to Advance National Security Capabilities
10/07/2025 | Firefly AerospaceFirefly Aerospace, a market leading space and defense technology company, has entered into a definitive agreement to acquire SciTec, Inc., a leader in advanced national security technologies, for approximately $855 million through a combination of $300 million in cash and $555 million in Firefly shares issued to SciTec owners at a price of $50 per share.
High-Tech Hill Technology Park Opens: Four New Factories Launched
09/26/2025 | TeltonikaThe ambitious vision announced in late 2020 to build a world-class technology park in Liepkalnis, Vilnius, has become a reality. AGP Investments, led by entrepreneur Arvydas Paukštys, together with high-tech leaders Teltonika and TLT, today inaugurated four new factories at the Vilnius High-Tech Hill Technology Park.
U.S. Manufacturing Jobs Decline Amid Tariffs and Immigration Crackdown
09/17/2025 | I-Connect007 Editorial TeamManufacturers in the U.S. are cutting jobs even as President Donald Trump pushes policies he says will revitalize the industry. Employers shed 12,000 manufacturing jobs in August, while payrolls in the sector have fallen by 42,000 since April, according to a new analysis from the Center for American Progress (CAP) based on government labor data.
Defense Speak Interpreted: If CHIPS Cuts Back, What Happens to Electronics Packaging Funds?
09/02/2025 | Dennis Fritz -- Column: Defense Speak InterpretedIn my May column, I examined the topic of the CHIPS Act and its current status as a U.S. government program. I found that CHIPS activities continue, but some corporations have delayed or canceled them because of budget cuts or corporation-specific problems. However, CHIPS integrated circuits—mostly administered by the Department of Commerce—don’t fully drive the electronics interconnection activity being funded by the government. Let’s cover the progress/status of other programs:
Ecolab to Acquire Ovivo’s Electronics Ultra-Pure Water Business
08/15/2025 | EcolabEcolab Inc. has entered into a definitive agreement to acquire Ovivo’s Electronics business, a leading and fast-growing global provider of breakthrough ultra-pure water technologies for semiconductor manufacturing.